Synthesis and properties of organotin epoxy polymers from tri-n-butyltin esters of ω - amino acids

Structure-property relationships in a series of thermoset organotin polymers have been investigated. The tri-n-butyltin esters of glycine, 4-aminobutanoic, 6-aminohexanoic, and 11-aminoundecanoic acids were synthesized and reacted with diepoxides to prepare prepolymers carrying epoxide end groups. The prepolymers were crosslinked by diethylenetriamine or metaphenylenediamine. Similar epoxy network polymers were prepared directly from the tributyltin ester of 3,5-diaminobenzoic acid which was also synthesized. The strength, moduli, toughness, glass transition and dynamic mechanical response of the polymers were investigated, and correlated with structural changes introduced in the network. The results establish the utility of the adopted synthesis schemes in exercising considerable control over the bulk polymer properties, and consequently, in modifying the controlled release of organotin groups from the crosslinked network.     

Study of impurity induced modifications in amorphous N-type (GeSe3·5)100−x Bi x using high pressure technique

The technique of high pressure is utilized to study the carrier transport behaviour in doped and undoped bulk amorphous (GeSe_3·5)_100−x Bi _x (x=0, 2, 4, 10) down to liquid nitrogen temperature to observe impurity induced modifications in amorphous semiconductors. It is observed that pressure induced effects in lightly doped (2 at % Bi) and heavily doped (x=4, 10) semiconductors are markedly different. Results are discussed in view of the incorporation behaviour of the bismuth impurity.     

Effects of situational demand upon social enjoyment and preference in schizotypy.

The socioemotional functioning of schizophrenic and schizotypic individuals is marked by withdrawal, poor organization, and limited emotional displays. Such behavioral tendencies and lack of social enjoyment in schizotypy could be linked to the relative situational demands or role ambiguity inherent in specific social activities. To determine whether high-schizotypy individuals prefer more clearly role-defined social activities (e.g., visiting relatives) to more ambiguous, novel situations (e.g., going alone to a party), the authors gathered reports from 52 high-schizotypy and 60 low-schizotypy individuals on their enjoyment and frequency of engaging in social situations varying in relative situational demand. Parallel reports were obtained from knowledgeable others. Group × Situational Demand interactions revealed the hypothesized pattern of reduced frequency and enjoyment ratings for ambiguous or novel situations by the high-schizotypy participants in both self and others' reports. Groups were more comparable in their reported frequency and enjoyment of less ambiguous situations. Results suggest the importance of situational demands in the socioemotional experience and behavioral withdrawal in schizotypy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Ionic conductivity in poly(vinyl butyral) based polymeric electrolytes: Effect of solvents and salts

Li⁺ conductive solid polymeric electrolytes (SPEs) have been prepared by complexing Li salts LiX (X = I, SCN, CLO4, CF3SO3) with poly(vinyl butyral) (PVB) an amorphous polymer with a low T_g value and well known for its outstanding laminating properties. These self-supporting SPEs have been prepared by the solution cast technique using cyclohexanone, tetrahydrofuran, and n-butyl alcohol as solvents. The XRD and DSC investigations correlated to measured ionic conductivities have revealed that in addition to the amorphous nature of the resulting complex, its T_g value, the concentration and the values of the lattice energies of the complexing salts, the solvent used in making the SPEs also govern the value of ionic conductivity. Highest ionic conductivity values attained in SPEs made with n-butyl alcohol are explained in terms of the interception of the hydrogen bonding due to solvation.     

Effect of organic dopants on electrodeposition and characteristics of polyaniline under the varying influence of H2SO4 and HClO4 electrolyte media

Electrodeposition of conducting polyaniline (Pani) was made under potentiostatic condition at pH 1.0 in different electrolyte media (H₂SO₄ and HClO₄) in the absence and presence of two organic dopants, disodium salts of naphthalene-1,5-disulphonic acid (NSA) and of catechol-3,5-disulphonic acid (CSA). The rate and yield of Pani deposition were dependent on the acid medium and the dopant employed. NSA in H₂SO₄ caused an increase in rate and yield but CSA decrease when compared to the rate and yield of H₂SO₄ alone. In HClO₄ medium, both the dopants showed a decrease. With regard to DC electrical conductivity, both the dopants exhibited an enhancement in H₂SO₄ medium but NSA a decline in HClO₄. Characterisation of the electrosynthesised polymer samples by various instrumental techniques (cyclic voltammetric: CV, FTIR, UV-Visible: UV-Vis, EPR, XRD, TGA and DTG methods) revealed that between the two acid media, H₂SO₄ was the better one. Further, it enlightened the role of two organic dopants in relation to the acid media. The advantageous role of NSA in H₂SO₄ had origin on its molecular characteristics such as non-polarity, larger π-electron cloud etc., while CSA could not perform such a role because of its easily oxidisable hydroxyl groups. In HClO₄, however, both the dopants could play only an unfavourable role owing to its greater polarity and oxidizing power than H₂SO₄.     

Performance analysis of voting strategies for a fly-by-wire systemof a fighter aircraft

Findings of studies on input processing of a digital fly-by-wire system of a fighter aircraft are presented. Objectives were to select a suitable software structure complying with reliability and fault tolerance requirements and to assess its computational load. Ramp and constant input signals with noise were studied based on Monte-Carlo methods. Voting strategies studied and compared include lower-median, upper-median, and weighted average. Execution times and memory requirements of each strategy have also been assessed     

Damage mechanisms and failure modes in cross-ply laminates under monotonic tensile loading: The influence of fiber sizing

In this study, the effect of fiber-matrix interphase on the damage modes and failure mechanisms in (0, 90₃), cross-ply graphite-toughened epoxy laminates is investigated. Two material systems (designated as 810 A and 810 O) with the same fiber and same matrix, but with different fiber sizings, were used to study the effect of the interphase. The system designated as 810 A contained an unreacted Bisphenol-A (epoxy) sizing, while a thermoplastic polyvinylpyrrolidone (PVP) sizing was used in the 810 O system. Damage accumulation in the cross-ply laminates under monotonic tensile loading was monitored using edge replication, x-ray radiography, acoustic emission, optical and scanning electron microscopy. Results indicate that the fiber-matrix bond strength is lower in the 810 O system compared to the 810 A system. Transverse matrix cracking initiates at a significantly lower stress level in the 810 O laminate. The 810 O laminates also exhibit longitudinal splitting, while the stronger bonding suppress this damage mode in the 810 A laminates. Numerous local delamination occur on the 0/90 interface at the intersection of 0 and 90 degree ply cracks, in the 810 O laminates. These are absent in the 810 A laminates. The failure modes are also different in the two material systems used in this study. The 810 A laminate exhibits a brittle failure, controlled by the local stress concentration effects near broken fibers. In the 810 O laminates, the presence of longitudinal splits result in the reduction of stress concentration effects near fibe fractures. This results in a global strain controlled failure in the 810 O system. It is concluded that the presence of different fiber sizings result in different damage modes and failure mechanisms in the cross-ply laminates used in this study.Research Associate, Research Assistant, Alexander Giacco Professor and Professor respectively.