Mechanism of paper wet strength development by polycarboxylic acids with different molecular weight and glutaraldehyde/poly(vinyl alcohol)

In our previous research, we found that crosslinking paper using poly(carboxylic acid)s with different molecular weight or using the combination of glutaraldehyde and poly(vinyl alcohol) (PVA) significantly improved the wet strength of the paper. In this research, we studied the mechanism of paper wet strength development using crosslinking systems with different molecular weight by measuring scanning electron microscopic (SEM) images, wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. The paper crosslinked by a high‐molecular weight (MW) poly(carboxylic acid) shows more swelling by water than that crosslinked by a low‐MW polycarboxylic acid in the SEM micrographs even though both treated paper samples have similar wet strength. Thus, the data suggest that high‐MW poly(carboxylic acid)s promote the formation of interfiber crosslinking. Crosslinking paper by glutaraldehyde, a crosslinking agent of small molecular size, improves wet strength and reduces flexibility and swellability of paper because of the formation of intrafiber crosslinking. Combining glutaraldehyde with PVA as a coreactant increases wet strength and also retains flexibility and swellability of the treated paper because of the formation of interfiber crosslinking. The hypothesis that PVA reacts with glutaraldehyde to form a polymeric pentanedialated‐PVA crosslinking system and promotes the formation of interfiber crosslinking on the paper is supported by the data of wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 277–284, 2006     

The use of electrochemical noise methods (ENM) to study thick, high impedance coatings

Thick, high impedance organic coatings are those class of coatings used to provide corrosion protection to naval vessels, pipelines, gasoline storage tanks, and other large structures such as bridges and plant structures. These coatings, especially the newest generations now being used in practice, can provide exceptional protection and lifetime of performance such that properly and accurately assessing and differentiating among competing coatings is a very difficult task. The standard protocol of salt fog testing (ASTM B117), immersion testing, and outdoor exposure in a corrosive environment with subjective evaluation of a coating's performance durings and after testing, does not adequatcly rank and predict coating lifetimes for new coating systems, especially for the environmentally compliant coating systems such as powder coatings (especially the thick, fusion bonded epoxy (FBE) coatings used for pipelines), two component epoxy and urethane coatings and waterborne coatings. New, objective test methods are desperately needed by users and manufacturers of coatings. A relatively new electrochemical test procedure, electrochemical noise methods (ENM), as developed by Skerry and Eden, has been shown in our laboratory to be very successful in the ranking and prediction of relative coating performance. We have used the method successfully on naval ship coatings, several pipeline coatings and other related systems, and Skerry has used them successfully on industrial maintenance coatings. We have used these methods in conjunction with electrochemical impedance spectroscopy, d.c. resistance measurements and cyclic salt fog testing of the Prohesion^TM type. In our studies of pipeline coatings, we needed to investigate thermal effects because of their extended range of use temperature. In these studies, we have discovered that electrochemical methods can be used for an in situ measurement of the T_g of coatings in electrolyte immersion. Further, the ‘plasticizing’ effect of aqueous electrolyte absorption as well as its relative irreversibility has been shown. For all coatings studied, ENM provided useful, objective, numerical data which rapidly ranks coatings and provides useful information on the relative lifetime prediction of coatings which may provide up to 30 years of service.     

3-Methyl-α-himachalene: Proposed structure for novel homosesquiterpene sex pheromone ofLutzomyia longipalpis (diptera: Psychodidae) from Jacobina,Brazil

The principal behaviorally active volatile component (ca. 90% +) of the sex pheromone glands ofLutzomyia longipalpis from Jacobina. Brazil, has been isolated and characterized as a novel homosesquiterpene with the structure 3-methyl--himachalene (C₁₆H₂₆). A minor component (ca. 10%) of the gland extract has also been identified as the sesquiterpene-himachalene (C₁₅H₂₄). This work confirms that there are at least 3 members of theL. longipalpis species complex.     

Guideline for Measurement of Ozone Concentration in the Process Gas From an Ozone Generator

A joint meeting of members of the Quality Assurance Committees of the International Ozone Association Pan American Group (PAG), European-African Group (EAG), and Nippon Islands Group (NIG) was held in Oxford, Ohio on November 8 and 9, 1995. The purpose of the meeting was to establish a single, shared guideline for ozone concentration measurement in the gas phase and, in particular, from commercial ozone generators.     

Electrochemically characterizing the ac-dc-ac accelerated test method using embedded electrodes

Embedded sensors were used as an in situ corrosion-sensing device for aircraft and vehicular structures protected by organic coatings. Results are presented where changes associated with standard air force aircraft and army vehicle coatings were monitored by embedded sensors. These coatings consisted of a polyurethane topcoat and an epoxy primer, however are formulated to provide different characteristics. The ac-dc-ac testing method was used to accelerate the degradation of these coatings while being immersed in a NaCl medium. Electrochemical impedance spectroscopy and electrochemical noise measurement experiments were used to monitor the induced changes. A comparison of the results between coatings subjected to the ac-dc-ac exposure and coatings subjected to only constant immersion in the NaCl medium is presented. The results were used to demonstrate the effectiveness of the ac-dc-ac method at accelerating the degradation of an organic coating without observably changing the normal mechanism of degradation. The data highlights the different features of the coating systems and tracks them while the coating is being degraded. The aircraft coating was characterized by a high-resistant topcoat that can mask corrosion/primer degradation at the primer/substrate interface whereas the vehicle coating was characterized by a low-resistant topcoat with an effective corrosion inhibiting primer. Details of the ac-dc-ac degradation were evaluated by using an equivalent circuit to help interpret the electrochemical impedance data.     

Inelastic Neutron Scattering and Density Functional Theory–Molecular Dynamics Study of Si Dynamics in Ti3SiC2

Observed differences between measured and calculated elastic constants for Ti₃SiC₂ are investigated using Density Functional Theory and Inelastic Neutron Scattering. The agreement between the calculated lattice dynamics and the dynamics measured by inelastic neutron scattering is considered good except at energies below ~20 meV where discrepancies suggest anharmonic potentials. This suggestion is confirmed by Density Functional Theory—Molecular Dynamics simulation which shows multiple site occupancy of the Si atoms within the basal plane at finite temperature and produces a calculated inelastic spectrum in better agreement with the measured spectrum in the low‐energy region. The highly anharmonic potential energy surface of the Si atoms offers an explanation for the failure of elastic constants, calculated based on the harmonic approximation, to agree with initial experimental measurements.     

Hot turning of a difficult-to-machine steel (sae xev-f) aided by infrared radiation

This paper discusses how to improve the position precision of a semi-closed loop servo system. A support vector regression algorithm is chosen to model and predict position error. The predicted error is then fed back to the input entry to compensate the error. Fuzzy PID control is introduced to adjust the controlling rule of the PID controller in the semi-closed loop servo system so as to improve the dynamic response characteristics of the servo system and reach a high degree of position precision. A case study is implemented. The simulation and experimental results show that combining the improved fuzzy control with predicted position error feedback ensures a high degree of position precision and a high degree of dynamic response characteristics.     

A broadband Fourier transform microwave spectrometer based on chirped pulse excitation

Designs for a broadband chirped pulse Fourier transform microwave (CP-FTMW) spectrometer are presented. The spectrometer is capable of measuring the 7-18 GHz region of a rotational spectrum in a single data acquisition. One design uses a 4.2 Gsampless arbitrary waveform generator (AWG) to produce a 1 mus duration chirped pulse with a linear frequency sweep of 1.375 GHz. This pulse is sent through a microwave circuit to multiply the bandwidth of the pulse by a factor of 8 and upconvert it to the 7.5-18.5 GHz range. The chirped pulse is amplified by a traveling wave tube amplifier and broadcast inside the spectrometer by using a double ridge standard gain horn antenna. The broadband molecular free induction decay (FID) is received by a second horn antenna, downconverted, and digitized by a 40 Gsampless (12 GHz hardware bandwidth) digital oscilloscope. The second design uses a simplified pulse generation and FID detection scheme, employing current state-of-the-art high-speed digital electronics. In this spectrometer, a chirped pulse with 12 GHz of bandwidth is directly generated by using a 20 Gsampless AWG and upconverted in a single step with an ultrabroadband mixer. The amplified molecular emission is directly detected by using a 50 Gsampless digital oscilloscope with 18 GHz bandwidth. In both designs, fast Fourier transform of the FID produces the frequency domain rotational spectrum in the 7-18 GHz range. The performance of the CP-FTMW spectrometer is compared to a Balle-Flygare-type cavity-FTMW spectrometer. The CP-FTMW spectrometer produces an equal sensitivity spectrum with a factor of 40 reduction in measurement time and a reduction in sample consumption by a factor of 20. The CP-FTMW spectrometer also displays good intensity accuracy for both sample number density and rotational transition moment. Strategies to reduce the CP-FTMW measurement time by another factor of 90 while simultaneously reducing the sample consumption by a factor of 30 are demonstrated.     

Effects of substitution of Thr63 by alanine on the structure and function of Lactobacillus casei dihydrofolate reductase

A mutant of Lactobacillus casei dihydrofolate reductase hasbeen constructed in which Thr63, a residue which interacts withthe 2'-phosphate group of the bound coenzyme, is replaced byalanine. This substitution does not affect k_cat, but producesan 800-fold increase in the K_m for NADPH, which reflects dissociationof NADPH from the enzyme-NADPH-tetrahydrofolate complex, anda 625-fold increase (corresponding to 3.8 kcal/mol) in the dissociationconstant for the enzyme-NADPH complex. The difference in magnitudeof these effects indicates a small effect of the substitutionon the negative cooperativity between NADPH and tetrahydrofolate.Stopped-flow studies of the kinetics of NADPH binding show thatthe weaker binding arises predominantly from a decrease in theassociation rate constant. NMR spectroscopy was used to comparethe structures of the mutant and wild-type enzymes in solution,in their complexes with methotrexate and with methotrexate andNADPH. This showed that only minimal structural changes resultfrom the mutation; a total of 47 residues were monitored fromtheir resolved ¹H resonances, and of these nine in the binarycomplex and six in the ternary differed in chemical shift betweenmutant and wild-type enzyme. These affected residues are confinedto the immediate vicinity of residue 63. There is a substantialdifference in the ³¹P chemical shift of the 2'-phosphate ofthe bound coenzyme, reflecting the loss of the interaction withthe side chain of Thr63. The only changes in nuclear Overhausereffects (NOEs) observed were decreases in the intensity of NOEsbetween protons of the adenine ring of the bound coenzyme andthe nearby residues Leu62 and Ile102, showing that the substitutionof Thr63 does cause a change in the position or orientationof the adenine ring in its binding site.     

Axisymmetric extrusion through adaptable dies—Part 1: Flexible velocity fields and power terms

An adaptable die is one that not only produces the correct geometrical shape, but also is designed through an adaptable method to impart other desirable properties to the product or process. In this first part of a series of papers, six kinematically admissible velocity fields are developed for use in upper bound models for axisymmetric extrusion through various dies, including extrusion through adaptable dies. Three base velocity fields are presented:

(1) assuming proportional angles in the deformation zone,

(2) assuming proportional areas in the deformation zone, or

(3) assuming proportional distances from the centerline in the deformation zone.

The base velocity is modified by an additional term comprised of two functions. One function allows extra flexibility in the radial direction, and the second function allows extra flexibility in the angular direction. There are two forms of the second function, which meet the required boundary conditions. The flexibility function in the radial direction is represented by a series of Legendre polynomials, which are orthogonal over the deformation region. The power terms derived for these velocity fields for use in upper bound models are also presented.Part 2 of this series compares the results obtained in upper bound models for the six velocity fields for a spherical extrusion die. In Part 3, the use of the best velocity field for extrusion through streamlined dies is developed to determine the adaptable die shape, which minimizes the required extrusion pressure. Additionally, the adaptable die shape is compared with results from Yang and Han for arbitrarily curved and streamlined dies.