Occurrence of wax esters and 1-O-alkyl-2,3-diacylglycerols in goat epididymal sperm plasma membrane

Two unusual lipid classes were detected by thin-layer chromatography in the neutral lipids derived from goat cauda-epididymal sperm plasma membrane. The lipids were identified as wax esters and 1-O-alkyl-2,3-diacylglycerols based on chromatographic properties, identity of their hydrolysis products, and infrared/¹H nuclear magnetic resonance spectral evidence. The membrane containedca. 3 and 5 μg/mg protein of wax esters and alkyldiacylglycerols, respectively. The relative proportions of wax esters and alkyldiacylglycerols in the total neutral lipids were 1.5% and 2.4%, respectively. The lipids contained fatty acids with chain lengths of C₁₄ to C₂₂. The major fatty acids of the wax esters were 14∶0, 16∶0, 16∶1ω7, 18∶0 and 18∶1ω9. The fatty acids in alkyldiacylglycerol were 16∶0, 18∶0, 22∶5ω3 and 22∶6ω3. Alkyldiacylglycerol was particularly rich in docosahexaenoic acid 22∶6ω3) representing 30% of the total fatty acids. The alcohols of wax ester were all saturated with C₂₀–C₂₉ carbon chains. The deacylated products derived from alkyldiacylglycerols were identified as hexadecyl, octadecyl and octadec-9′-enyl glycerol ethers.     

Modification of non‐Newtonian flow behavior of aqueous solution of poly(vinyl alcohol) by conducting polypyrrole prepared by in situ polymerization of pyrrole

The rheological behavior of an aqueous solution of poly(vinyl alcohol) (PVA) and polypyrrole (PPY) dispersions prepared by ferric chloride (FeCl₃)‐catalyzed polymerization of pyrrole was investigated at 12°C using a coaxial rotational viscometer. The results show that the addition of a low dose of FeCl₃ to the PVA solution greatly influences its rheology. The prominent shear‐thickening (dilatant) nature of PVA turns significantly pseudoplastic (shear thinning) in the presence of FeCl₃. Polypyrrole‐loaded PVA was obtained in a stable, optically clear dispersion by in situ polymerization of pyrrole in an aqueous PVA solution (5%) using FeCl₃ as the oxidative catalyst at 12°C. The PPY dispersions in aqueous PVA systems having a low loading of PPY and low Fe⁺³ content retain the dilatant character of an aqueous PVA solution; however, for an aqueous PVA system having a relatively high PPY loading and also a high Fe⁺³ content, prominent pseudoplastic (shear thinning) behavior is exhibited. The odd novel rheological patterns exhibited by a PVA solution in the absence and presence of FeCl₃ and the PVA–PPY dispersions containing FeCl₃ under different sets of conditions are explained on the basis of the complexation of PVA by Fe⁺³ and related ions and also as a consequence of some degree of H‐bonding and chemical grafting between the support polymer PVA and the PPY formed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3737–3741, 2004     

Synthesis and densification of magnesium aluminate spinel: effect of MgO reactivity

Stoichiometric magnesium aluminate spinel was synthesized by reaction sintering of alumina with caustic and sintered magnesia. The volume expansion of 5–7% during MgAl₂O₄ formation was utilized to identify the starting temperature of spinel formation and densification by high temperature dilatometry. The magnesia reactivity was determined by measurement of crystallite size and specific surface area. Caustic magnesia and sintered magnesia behave differently vis-à-vis phase formation and densification of spinel. Densification of stoichiometric Mag-Al spinel was carried out between 1650 and 1750 °C. Attempts were made to correlate the MgO reactivity with microstructure and densification of spinel.     

Default Bayesian Priors for Regression Models with First-Order Autoregressive Residuals

Abstract. The objective of this paper is to develop default priors when the parameter of interest is the autocorrelation coefficient in normal regression models with first-order autoregressive residuals. Jeffreys' prior as well as reference priors are found. These priors are compared in the light of how accurately the coverage probabilities of Bayesian credible intervals match the corresponding frequentist coverage probabilities. It is found that the reference priors have a definite edge over Jeffreys' prior in this respect. Also, the credible intervals based on these reference priors seem superior to similar intervals based on certain divergence measures.     

Recycling of silicone rubber waste: Effect of ground silicone rubber vulcanizate powder on the properties of silicone rubber

The silicone rubber vulcanizate powder (SVP) obtained from silicone rubber by mechanical grinding exists in a highly aggregated state. The particle size distribution of SVP is broad, ranging from 2 µm to 110 µm with an average particle size of 33 µm. X‐ray Photoelectron Spectroscopy (XPS) and Infrared (IR) Spectroscopy studies show that there is no chemical change on the rubber surface following mechanical grinding of the heat‐aged (200°C/10 days) silicone rubber vulcanizate. Addition of SVP in silicone rubber increases the Mooney viscosity, Mooney scorch time, shear viscosity and activation energy for viscous flow. Measurement of curing characteristics reveals that incorporation of SVP into the virgin silicone rubber causes an increase in minimum torque, but marginal decrease in maximum torque and rate constant of curing. However, the activation energy of curing shows an increasing trend with increasing loading of SVP. Expectedly, incorporation of SVP does not alter the glass‐rubber transition and cold crystallization temperatures of silicone rubber, as observed in the dynamic mechanical spectra. It is further observed that on incorporation of even a high loading of SVP (i.e., 60 phr), the tensile and tear strength of the silicone rubber are decreased by only about 20%, and modulus dropped by 15%, while the hardness, tension set and hysteresis loss undergo marginal changes and compression stress‐relaxation is not significantly changed. Atomic Force Microscopy studies reveal that incorporation of SVP into silicone rubber does not cause significant changes in the surface morphology.     

Conducting blends of poly(o‐toluidine) and ethylene–propylene–diene terpolymer

Poly(o‐toluidine) (POT) is an electroactive polymer with poor mechanical and thermal characteristics. We examined the scope for improving such properties by making blends of POT with ethylene–propylene–diene rubber (EPDM). We prepared POT–EPDM blends containing different weight fractions of POT by intimately mixing known volumes of separate solutions of the two polymers (POT in THF and EPDM in toluene). Films of EPDM and POT–EPDM blends in solution were obtained by spreading, solvent evaporation, and film casting techniques. POT, EPDM, and their blends were characterized in solution by ultraviolet‐visible spectroscopy, and the respective dried samples were analyzed by Fourier transform infrared spectroscopy and thermogravimetry. The polymer samples were further analyzed morphologically by scanning electron microscopy, and their tensile strengths were also evaluated. Spectroscopic and thermal studies of the blends indicated some sort of interaction between the two constituent polymers. The direct current electrical conductivity of the blends in increasing order of POT loading (12.5–100%) was in the range 9.9 × 10^?5 to 11.6 × 10^?2 S cm^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2550–2555, 2003     

Recent advances on injectable nanocomposite hydrogels towards bone tissue rehabilitation

There has been significant interest in the recent past to develop injectable hydrogel scaffolds that follow minimally invasive implantation procedures towards efficient healing and regeneration of defective bone tissues. Such scaffolds offer several advantages, as they can be injected into the irregularly shaped defect and can act as a low-density aqueous reservoir, incorporating necessary components for bone tissue repair and augmentation. Considering that bone is a biocomposite of natural biopolymer and bioapatite nanofiller, there has been a growing trend to develop nanocomposite scaffolds by combining biopolymers and inorganic nanofillers to biomimic the hierarchical nanostructure and composition of natural bone. Furthermore, the nanocomposite scaffolds can be tailored to have patient-specific bone properties, which can lead to better biological responses. The present article begins with the introduction, followed by an overview of polymer matrices, property requirements, and crosslinking techniques employed for injectable hydrogels. Various strategies to develop injectable composites, with emphasis on nanocomposite hydrogels incorporating bioinert and bioactive nanofillers have been discussed. The fundamental challenges related to the development of injectable hydrogel nanocomposite scaffolds and the research efforts directed towards solving these problems have also been reviewed. Finally, future trends and conclusions on new generation injectable hydrogel nanocomposite bone scaffolds have been discussed in this article.     

Affinity Studies of Hemicyanine Derived Water Soluble Colorimetric Probes with Reactive Oxygen/Nitrogen/Sulfur Species

Peroxynitrite (ONOO^-) is an essential endogenous reactive oxygen species (ROS) generated in mitochondria under various pathological and physiological conditions. An increase in its level in mitochondria is related to numerous diseases. Herein, we report a series of hemicyanine-derived water-soluble colorimetric probes ( 1 – 4 ) and the reactivity of which was studied with various reactive oxygen, nitrogen, and sulfur species. Probes 1 – 4 are formed by conjugating 1,2,3,3-tetramethyl-3H-indolium iodide and 4-hydroxybenzaldehyde or its derivatives through an alkene linkage formed by the Knoevenagel reaction. Oxidative cleavage of the electron-rich double bond of the conjugated hemicyanine dye revealed a discerning affinity of probe 3 towards peroxynitrite among all reactive oxygen species. The rapid change in color of 3 provides a sensitive and selective method for detecting peroxynitrite with a low detection limit of 180 nM. Notably, the water solubility of the probe displays excellent performance for the selective detection of peroxynitrite among ROS and reactive nitrogen (RNS)/sulfur species (RSS). UV-vis, ¹H NMR, and ¹³C NMR spectroscopic data and results from theoretical calculations provide further information on the interaction of peroxynitrite with probe 3 .     

Peracetic acid bleaching of banana fibre: Process optimisation

Banana is an important commercially available natural fibre, suitable for making coarse yarns. It has also potential for making fine home and apparel textiles after requisite chemical intervention or blending with other fine fibres. For making such products, chemical processing, namely bleaching, coloration and finishing, play an important role. Bleaching of fibre is generally carried out in highly alkaline condition and at high temperature of 85°C using hydrogen peroxide to achieve whiteness index of > 70 with about 25% loss in tensile strength. To achieve a similar whiteness index, while addressing strength loss, a fibre friendly low-temperature low-alkali based peracetic acid (PAA) bleaching of banana fibre has been proposed in the present article. Important bleaching process parameters, namely PAA concentration (10–30 g/L), time (60–180 min) and temperature (60–80°C), have been varied for optimisation of the bleaching process. Banana fibre bleaching using PAA concentration of 20 g/L at 70°C for 2 h can produce fibre with whiteness index of > 70, which is suitable for subsequent coloration. The PAA bleached banana fibre can retain 84% of its bundle strength and 95.6% of its weight. Physical (strength, fineness), chemical (attenuated total reflectance Fourier-transform infrared [ATR-FTIR], energy dispersive X-ray spectroscopy [EDX]), optical (colour) and morphological (scanning electron microscopy [SEM]) properties of banana fibres before and after bleaching were evaluated to study the efficacy of the process.     

Synthesis of Red-Light-Responsive Pheophorbide-a Tryptamine Conjugated Photosensitizers for Photodynamic Therapy

Six methyl pheophorbide-a derivatives were prepared by linking a tryptamine side chain at the C-13 ¹ , C-15 ² and C-17 ³ positions of pheophorbide-a. P repared conjugates were characterized and evaluated for their photocytotoxicity against A549 cells. The conjugate 6 a with strong absorption at 413 nm (Soret band), 663–671 nm (Q bands) and comparable fluorescence quantum yield (0.26) was found to exhibit significant cytotoxicity (659 nM). Molecular integration of pheophorbide-a and tryptamines showed synergistic effects as the most potent conjugate 6 a was identified with enhanced photocytotoxicity when compared to methyl pheophorbide-a. T he conjugate 6 a was smoothly taken up by A549 cells and exhibited intracellular localization predominantly to lysosome in the cytoplasm. Upon photoirradiation 6 a generated singlet oxygen to show potent cytotoxicity toward A549 cells.