Influence of nitriding on corrosion resistance of martensitic X17CrNi16‐2 stainless steel

Nitriding increases surface hardness and improves wear resistance of stainless steels. However, nitriding can sometimes reduce their corrosion resistance. In this paper, the influence of nitriding on the corrosion resistance of martensitic stainless steel was investigated. Plasma nitriding at 440 °C and 525 °C and salt bath nitrocarburizing were carried out on X17CrNi16‐2 stainless steel. Microhardness profiles of the obtained nitrided layers were examined. Phase composition analysis and quantitative depth profile analysis of the nitrided layers were preformed by X‐ray diffraction (XRD) and glow‐discharge optical emission spectrometry (GD‐OES), respectively. Corrosion behaviour was evaluated by immersion test in 1% HCl, salt spray test in 5% NaCl and electrochemical corrosion tests in 3.5% NaCl aqueous solution. Results show that salt bath nitrocarburizing, as well as plasma nitriding at low temperature, increased microhardness without significantly reducing corrosion resistance. Plasma nitriding at a higher temperature increased the corrosion tendency of the X17CrNi16‐2 steel.     

Screening,Molecular Cloning,and Biochemical Characterization of an Alcohol Dehydrogenase from Pichia pastoris Useful for the Kinetic Resolution of a Racemic β‐Hydroxy‐β‐trifluoromethyl Ketone

The stereoselective synthesis of chiral 1,3‐diols with the aid of biocatalysts is an attractive tool in organic chemistry. Besides the reduction of diketones, an alternative approach consists of the stereoselective reduction of β‐hydroxy ketones (aldols). Thus, we screened for an alcohol dehydrogenase (ADH) that would selectively reduce a β‐hydroxy‐β‐trifluoromethyl ketone. One potential starting material for this process is readily available by aldol addition of acetone to 2,2,2‐trifluoroacetophenone. Over 200 strains were screened, and only a few yeast strains showed stereoselective reduction activities. The enzyme responsible for the reduction of the β‐hydroxy‐β‐trifluoromethyl ketone was identified after purification and subsequent MALDI‐TOF mass spectrometric analysis. As a result, a new NADP⁺‐dependent ADH from Pichia pastoris (PPADH) was identified and confirmed to be capable of stereospecific and diastereoselective reduction of the β‐hydroxy‐β‐trifluoromethyl ketone to its corresponding 1,3‐diol. The gene encoding PPADH was cloned and heterologously expressed in Escherichia coli BL21(DE3). To determine the influence of an N‐ or C‐terminal His‐tag fusion, three different recombinant plasmids were constructed. Interestingly, the variant with the N‐terminal His‐tag showed the highest activity; consequently, this variant was purified and characterized. Kinetic parameters and the dependency of activity on pH and temperature were determined. PPADH shows a substrate preference for the reduction of linear and branched aliphatic aldehydes. Surprisingly, the enzyme shows no comparable activity towards ketones other than the β‐hydroxy‐β‐trifluoromethyl ketone.     

Efficient Engineering and Production Concepts for Products in Regulated Environments – Dream or Nightmare?

Manufacturing of chemical‐pharmaceutical products is moving increasingly fast on a global scale. Therefore, developing and starting up production facilities fast, with high quality, and at reasonable costs has become extremely challenging. Engineering concepts like modularization, standardization and simultaneous/parallel engineering are discussed as methods for speeding up process design and filing for regulatory approval. Transfer from batch to continuous operation mode of production is pointed out as the key‐issue in such strategies.     

How Different Characterization Techniques Elucidate the Nature of the Gold Species in a Polycrystalline Au/TiO2 Catalyst

TiO₂‐supported gold species were prepared via the deposition‐precipitation route, with conservation of the initial speciation by freeze‐drying. The structural and electronic properties of the Au species were investigated by X‐ray absorption spectroscopy, electron microscopy, and IR spectroscopy of adsorbed CO in four states. Exclusively Au^III was deposited on the TiO₂ surface in patches ranging from isolated Au ions to three‐dimensional clusters. This paper illustrates in detail the unique contributions of all characterization techniques to this structural model.     

Dispersive mixing efficiency of an elongational flow mixer on PP/EPDM blends: Morphological analysis and correlation with viscoelastic properties

Polypropylene and ethylene‐propylene‐diene terpolymer (PP/EPDM) blends were melt compounded in a new mixing device, designed in our laboratory under the trademark of RMX®, which predominantly generates elongational flows. Dispersion of the EPDM minor phase in PP was carried out in both RMX® and in an internal mixer (Haake Rheomix 600) at equivalent specific mixing energies and the resultant morphologies obtained by SEM were analyzed and compared. A better dispersive mixing efficiency of the RMX® mixer, i.e., lower D_n and D_v of the dispersed EPDM phase was observed. The impact of elongational flow was more pronounced for blends having a high viscosity ratio p, indicating an enhanced droplet break‐up mechanism, which was attributed to the combination of high shear rates inside the mixing element and important elongational flows in the convergent/divergent zones. The morphology of the blends was correlated with their linear viscoelastic properties by using the Palierne model. Very good agreement was found for the PP/EPDM 80/20 blends but for higher EPDM content, the Palierne model failed to describe the rheological behavior, which was attributed to percolation of the minor phase with increasing the concentration. Higher elasticity at low frequencies was observed for blends processed in the RMX®, which was attributed to a higher generated interfacial area. POLYM. ENG. SCI., 54:1444–1457, 2014. © 2013 Society of Plastics Engineers     

Investigations on Selectivity of Gas-Liquid Reactions in Capillaries

Biocatalysis offers a broad spectrum of possible ecological and economic advantages over conventional chemical catalysis processes, e.g., lower energy consumption and high enantio selectivity. The focus of this work is on gas-liquid reactions. These are of great importance in the chemical and biochemical industry and subject of current research since they are often limited by mass transfer or show low selectivity. Different suitable biocatalytically gas-liquid reaction systems were tested in capillary reactor designs in order to obtain information about the interaction between reaction and fluid mechanics. Furthermore, an optical measuring method was established. The experiments were performed in batch mode in a glass beaker with a flow cuvette for UV/Vis measurement of product concentration.     

Erratum to: Fe Oxides on Ag Surfaces: Structure and Reactivity

Topics in Catalysis -     

Quantitative risk assessment of listeriosis due to consumption of raw milk

The objectives of this study were to estimate the risk of illness for raw milk consumers due to Listeria monocytogenes in raw milk sold by permitted dealers, and the risk for people on farms who consume raw milk. Three scenarios were evaluated for raw milk sold by dealers: raw milk purchased directly from bulk tanks, from on-farm stores, and from retail. To assess the effect of mandatory testing of raw milk by regulatory agencies, the number of listeriosis cases per year was compared where no raw milk testing was done, only a screening test to issue a permit was conducted, and routine testing was conducted and milk was recalled if it was L. monocytogenes positive. The median number of listeriosis cases associated with consumption of raw milk from bulk tanks, farm stores, and retail for an intermediate-age population was 6.6 × 10(-7), 3.8 × 10(-5), and 5.1 × 10(-5) cases per year, respective ly. In populations with high susceptibility, the estimated median number of cases per year was 2.7 × 10(-7) (perinatal, i.e., pregnant women and their fetuses or newborns) and 1.4 × 10(-6) (elderly) for milk purchased from bulk tanks, 1.5 × 10(-5 ) (perinatal) and 7.8 × 10(-5) (elderly) for milk from farm stores, and 2.1 × 10(-5) (perinatal) and 1.0 × 10(-4) (elderly) for milk from retail. For raw milk consumed on farms, the median number of listeriosis cases was 1.4 × 10(-7) cases per year. A greater risk of listeriosis was associated with consumption of raw milk obtained from retail and farm stores as compared with milk obtained from bulk tanks. This was likely due to additional time-temperature combination steps in the retail and farm store models, which increased the chances for growth of L. monocytogenes in raw milk. A close relationship between prevalence of L. monocytogenes in raw milk and the values of disease incidence was observed. Hence, a reduction in the number of cases per year in all populations was observed when a raw milk-testing program was in place, especially when routine testing and recalling of milk was conducted.     

The metabolic processes of intestinal flora

Man is habitat of 10(14)-10(15) bacteria, most of them colonizing the digestive tract, mainly the large intestine. Here microbial metabolic processes are going on like in a black box. Their quality, quantity, dynamics and effects on the host are discernible only in fragments or from their net effect. Almost all organic compounds and nutrients, fiber, xenobiotics, digestive secretions and desquamated epithelial cells of the host enter into macroorganismic/microorganismic metabolic chains and processes, which are not known or measurable in detail. Examples are given for the metabolization of nutrients, esp. amino acids. Some information is concerned with morphological, physiological, biochemical immunological and pathological effects of the gastrointestinal flora, discernible from experiments with gnotobiotic animals. Microbial influences upon basic life processes of the host are described in a few examples.