Analytical techniques for the estimation of sulphite binding components in ciders and wines

Summary A rapid high performance liquid chromatography (HPLC) method based on the formation of dinitrophenylhydrazine (DNPH) derivatives was developed for the analysis of the major sulphite binding carbonyls in fermented ciders (acetaldehyde, pyruvate, α-ketoglutarate, galacturonic acid and L-xylosone). The synthesis of the DNPH derivative of L-xylosone, for use as an analytical standard, is also described. These data were used to calculate the predicted sulphite binding power of fermented ciders at various levels of free sulphur dioxide. Analysis of free and bound sulphur dioxide in the ciders, after equilibration with known amounts of added sulphite, was used to calculate the experimental sulphite binding power. These techniques were applied to a major study of sulphite binding in ciders which is reported in an accompanying paper.     

Influence of Zinc on Distiller's Yeast: Cellular Accumulation of Zinc and Impact on Spirit Congeners

Accumulation of zinc by a whisky distilling yeast strain of Saccharomyces cerevisiae was studied during fermentation of malt wort and synthetic defined medium. Zinc uptake by yeast cells was very rapid in malt wort, as zinc (0.32 μg/mL) was completely removed from the fermentation medium within one hour. The type of fermentable carbohydrate had an impact on the kinetics of zinc accumulation, with maltose most effective at enhancing metal uptake at zinc concentrations above 3.2 μg/mL. Enriching yeast cells with zinc by “preconditioning” impacted on the production of flavour congeners in the distillates produced from fermented cultures. Such distillates were characterised by an altered flavour and aroma profile. In particular, the production of some higher alcohols increased when yeast cells were preconditioned with zinc. This phenomenon is yeast strain related. Industrial fermentation processes, including brewing and distilling, may benefit from optimization of zinc bioavailability in yeast cultures resulting in more efficient fermentations and improved product quality.     

Zinc deprivation inhibits extracellular matrix calcification through decreased synthesis of matrix proteins in osteoblasts

Scope: Zinc is implicated as an activator for bone formation, however, its influence on bone calcification has not been reported. This study examined how zinc regulates the bone matrix calcification in osteoblasts. Methods and Results: Two osteoblastic MC3T3‐E1 cell subclones (SC 4 and SC 24 as high and low osteogenic differentiation, respectively) were cultured in normal osteogenic (OSM), Zinc deficient (Zn–, 1 μM), or adequate (Zn+, 15 μM) media up to 20 days. Cells (SC 4) were also supplemented with (50 μg/mL) or no ascorbic acid (AA) in combination with Zinc treatment. Zn– decreased collagen synthesis and matrix accumulation. Although AA is essential for collagen formation, its supplementation could not compensate for Zinc deficiency‐induced detrimental effects on extracellular matrix mineralization. Zn– also decreased the medium and cell layer alkaline phosphatase ALP activity. This decreased ALP activity might cause the decrease of Pi accumulation in response to Zn–, as measured by von Kossa staining. Ca deposition in cell layers, measured by Alizarin red S staining, was also decreased by Zn^–. Conclusion: Our findings suggest that zinc deprivation inhibits extracellular matrix calcification in osteoblasts by decreasing the synthesis and activity of matrix proteins, type I collagen and ALP, and decreasing Ca and Pi accumulation. Therefore zinc deficiency can be considered as risk factor for poor extracellular matrix calcification.     

Struggle with hydrogel CL wear increases with age in young adults

Purpose

To report the symptoms and experiences associated with habitual hydrogel (Hyd) and silicone hydrogel (SiHy) contact lenses (CLs) among young adults and measure their association with age.

Methods

Questionnaire responses from 699 Hyd and 183 SiHy wearers were analyzed to test the association of age with features indicating struggle with CL wear. Prevalence by age was compared between groups with Pearson's chi-square and within groups with Spearman's correlation coefficient.

Results

Hyd and SiHy groups were similar for sex and age distribution. Diagnosis of dry eye increased with age in the Hyd wearers from 10.6% to 21.1% (18-24 vs. 30-35 years), but was approximately 19% in the SiHy wearers across age. Adverse environments caused more discomfort with Hyd than SiHy lenses and Hyd wearers’ discomfort increased with age (smoky (p = 0.0001), dry air environments (p = 0.002), after napping or sleeping (p = 0.004). More Hyd wearers considered discontinuation of CL wear with age, from 4.6% to 14.2% (18-24 vs. 30-35 years, p < 0.04), but the proportion remained steady at 9% across age for SiHy wearers (p = 0.46).

Conclusions

From 18 to 35 years, hydrogel CL wearers reported increasing struggle with CL wear and more negative ratings compared to SiHy wearers. Older hydrogel CL wearers were also more likely to consider discontinuing CL wear compared with younger hydrogel or silicone hydrogel CL wearers in general. Young adult CL wearers should be routinely queried directly about specific aspects of CL wear in order to determine whether different lens types should be prescribed to avoid abandonment of CL wear.     

A flow cell for transient voltammetry and in situ grazing incidence X-ray diffraction characterization of electrocrystallized cadmium(II) tetracyanoquinodimethane

An easy to fabricate and versatile cell that can be used with a variety of electrochemical techniques, also meeting the stringent requirement for undertaking cyclic voltammetry under transient conditions in in situ electrocrystallization studies and total external reflection X-ray analysis, has been developed. Application is demonstrated through an in situ synchrotron radiation-grazing incidence X-ray diffraction (SR-GIXRD) characterization of electrocrystallized cadmium (II)-tetracyanoquinodimethane material, Cd(TCNQ)₂, from acetonitrile (0.1 mol dm⁻³ [NBu₄][PF₆]). Importantly, this versatile cell design makes SR-GIXRD suitable for almost any combination of total external reflection X-ray analysis (e.g., GIXRF and GIXRD) and electrochemical perturbation, also allowing its application in acidic, basic, aqueous, non-aqueous, low and high flow pressure conditions. Nevertheless, the cell design separates the functions of transient voltammetry and SR-GIXRD measurements, viz., voltammetry is performed at high flow rates with a substantially distended window to minimize the IR (Ohmic) drop of the electrolyte, while SR-GIXRD is undertaken using stop-flow conditions with a very thin layer of electrolyte to minimize X-ray absorption and scattering by the solution.     

Fine particle turbulence modulation

Streamwise turbulence intensities of fine particulate suspensions were studied in a 26 mm N.B. horizontal pipe loop. Colloidal silica spheres were prepared in 10^?4M and 1M KNO₃ solutions to control the degree of aggregate formation in the suspension. Using an ultrasonic Doppler velocity profiling sensor, the turbulence intensities of the fine particle suspensions were compared with those of a particle‐free flow over a range of Reynolds numbers. At low electrolyte concentration, the silica particles remain dispersed, with the turbulence intensity of the suspension flow comparable with that of the particle‐free flow. At high electrolyte concentration, increased particle‐particle interaction leads to the formation of particle aggregates which support turbulence augmentation over a critical Reynolds number range. The range of Reynolds numbers over which this turbulence enhancement is observed is limited by both fluid dynamic effects at low Reynolds numbers (Re ≈ 5500) and aggregate breakup at high Reynolds numbers (Re ≈ 8000). © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Predictions of porosity and fluid distribution through nonspherical‐packed columns

For beds comprised randomly arranged nonspherical particles, the prediction and understanding of the packing characteristics and subsequent fluid flow through the resulting porous media is a longstanding problem for chemical and process engineers. This paper presents the application of a digital modeling approach to particle packing, in which no more than elementary physical concepts are used, with the model using collision points to predict trends in bed structures of particles of different geometry. Lattice Boltzmann modeling (LBM), coupled to the output of the packing model, is used to subsequently assess velocity distribution through the generated structures. Simulation results are compared with data available from the literature, as a means of model validation, where it is demonstrated that the combined approach of the digital packing algorithm and LBM provide a modeling capability that is of value to a range of engineering applications. © 2011 American Institute of Chemical Engineers AIChE J, 2012