2.4GHz动态CMOS分频器的设计

对现阶段的主流高速CMOS分频器进行分析和比较,在此基础上设计一种采用TSPC(truesingle phase clock)和E-TSPC(extended TSPC)技术的前置双模分频器电路.该分频器大大提高了工作频率,采用0.6μm CMOS工艺参数进行仿真的结果表明,在5V电源电压下,最高频率达到3GHz,功耗仅为8mW.     

有线电视工程建设流程再造设计

从理论与实际工作相结合的角度出发,以淄博广电青鸟公司为研究对象,对有线电视网络工程建设流程的现状、存在的问题和原因进行细致深入分析,然后按照提出的再造方案的设计原则,设计了工程建设流程的再造方案,并对新旧流程进行比较。     

信息安全风险评估的模糊多准则决策方法

基于ISO/IEC17799标准建立了一个综合的信息系统风险分析框架,并运用模糊多准则决策(FMCDM)方法计算信息安全风险,根据风险等级矩阵(RLM)对信息资产风险进行级别划分,最终建立评估信息资产相关风险的完整模型。     

智能组合式充电机的开发与研制

针对集中供电式地震勘探仪器在地震勘探作业中对电瓶充电的特殊要求，我们研制出一种智能组合式充电机。文中阐述了智能式充电机的设计原理，介绍了其性能指标及使用效果。     

Automatic image hanging protocol for chest radiographs in PACS.

Chest radiography is one of the most widely used techniques in diagnostic imaging. It comprises at least one-third of all diagnostic radiographic procedures in hospitals. However, in the picture archive and communication system, images are often stored with the projection and orientation unknown or mislabeled, which causes inefficiency for radiologists' interpretation. To address this problem, an automatic hanging protocol for chest radiographs is presented. The method targets the most effective region in a chest radiograph, and extracts a set of size-, rotation-, and translation-invariant features from it. Then, a well-trained classifier is used to recognize the projection. The orientation of the radiograph is later identified by locating the neck, heart, and abdomen positions in the radiographs. Initial experiments are performed on the radiographs collected from daily routine chest exams in hospitals and show promising results. Using the presented protocol, 98.2% of all cases could be hung correctly on projection view (without protocol, 62%), and 96.1% had correct orientation (without protocol, 75%). A workflow study on the protocol also demonstrates a significant improvement in efficiency for image display.     

干涉型激光直写技术用于光盘防伪

利用作者研制的干涉型激光直写系统，阐述了干涉型激光直写设计OVD的方法，防伪特征，介绍了应用于光盘防伪的OVD技术和应用前景，给出了实验结果。     

On-demand learning for a wireless campus

The current Internet and wireless networks are harsh environments for transporting high-bandwidth multimedia data. We examine the technical issues involved, and describe an end-to-end solution to support a Web-based learn-on-demand system that operates in a wireless campus environment.     

层序单元体系域划分及勘探意义

体系域是层序地层学理论体系中的重要概念，在隐蔽油气藏的勘探中，勘探家们极为重视低位体系域。但体系域的成因意义、是否有不同级别层序的体系域以及如何划分，在实际工作中认识不一致。结合勃海湾盆地的勘探实例，分析体系域的成因机制、组合特征和勘探规律，认为：体系域是基准面变化等因素作用的产物，不同级别的层序都发育着与其对应的体系域：一般情况下，三级层序对应的体系域单元与含油气层的规模相匹配，但四级层序对应的体系域才是隐蔽油气藏赋存的有利部位。图5参6。     

磁场对石油污水管线钢的腐蚀行为研究

采用第3代永磁材料NdFeB(钕铁硼),研究了在施加永磁场条件下,模拟油田污水介质对20号钢的腐蚀过程,采用增重法、X射线衍射以及电化学方法对磁场作用下石油污水管线钢的腐蚀行为进行分析和评价。研究结果表明,磁场对Fe3O4的形成、自腐蚀电位正移幅度有促进作用,磁场对腐蚀产物的增重率影响较大,但它们与磁感应强度之间存在着极值关系。     

Lead-free piezoelectric ceramics with composition of (0.97−x)Na1/2Bi1/2TiO3-0.03NaNbO3-xBaTiO3

Compositions in (Na_1/2Bi_1/2)TiO₃ based ternary system, (0.97 – x) (Na_1/2Bi_1/2)TiO₃-0.03NaNbO₃-xBaTiO₃ (x = 0, 0.01, 0.02, 0.04, 0.05, 0.06, 0.08) are synthesized using conventional solid state reaction method. Influence of BaTiO₃ on crystal structure, dielectric and piezoelectric properties are investigated. All compositions can form single perovskite phase. Powder x-ray diffraction patterns can be indexed assuming a pseudo-cubic structure. Lattice constant increases with the increase of BaTiO₃ concentration. Rhombohedral distortion is observed in poled samples with BaTiO₃ concentration up to 6 mol%. Temperature dependence of dielectric constant and dissipation factor measurement reveals that all compositions experience two phase transitions: from ferroelectric to antiferroelectric and from antiferroelectric to paraelectric. Both transition temperatures, T _c and T _f, are lowered due to introduction of BaTiO₃. Ferroelectric to antiferroelectric phase transition has relaxor characteristics. Piezoelectric properties have relatively higher value around 1 mol% to 4 mol% BaTiO₃. In ceramics with x = 0.02, thickness electromechanical coupling factor (k _t) of 0.51 and piezoelectric charge constant (d ₃₃) of 110 × 10^–12 C/N are obtained. Addition of small amount of BaTiO₃ (x = 0.01, 0.02) improves piezoelectric properties compared to NBT-NN binary system, while T _f remains above 140°C, higher than that of NBT-BT binary system composition with similar piezoelectric properties. This is in favor of the possible application of them as lead-free piezoelectric ceramics.