高等学校教育成本及其管理策略

高校教育成本核算，是高校管理体制改革的必然要求，是国家制定拨款标准和科学确定学费标准的重要依据，也是提高高校办学效益的迫切需要。牢固树立教育成本意识，继续推进后勤社会化改革，切实提高房屋设备利用率，建立健全人力资源成本分摊制度和资产有偿使用制度，加强教育成本研究与管理，是降低高校教育成本的有效途径。     

触摸屏在图书馆中的应用研究

近年来,随着网络技术的发展、多媒体技术的进步,人们的阅读习惯也随之发生变化,从纸质阅读逐渐向数字阅读倾斜,触摸屏就为读者开启了在图书馆内进行数字阅读的新篇章。本文先详细介绍触摸屏种类和在图书馆服务应用方式,而后简单介绍了在应用过程中需要注意的问题,并展望未来应用的发展。     

Novel flexible electrically conductive adhesives from functional epoxy,flexibilizers, micro‐silver flakes and nano‐silver spheres for electronic packaging

In this study, five different flexibilizers were added into a matrix resin to improve the flexibility of electrically conductive adhesives (ECAs). The flexible ECAs were fabricated from the matrix resin and electrically conductive fillers. Their curing was fixed at 150 °C for 30 min. Of the five flexibilizers, 1,3‐propanediol bis(4‐aminobenzoate) (PBA) had the best effect on the electrical, mechanical and thermal properties of the ECAs. During curing, PBA reacted with the functional epoxy in the matrix resin. The soft ether segments in PBA were grafted into the crosslinked epoxy network to form an orderly spaced mesh structure. This led to high‐temperature stability, with the pyrolysis temperature being above 350 °C. Flexible ECAs with a 10% weight ratio of PBA in the matrix resin had the best properties. Their viscosity and bulk resistivity were the lowest. Their flexibility and electrical conductivity were the highest. They also had low storage modulus which could effectively dissipate or reduce the residual shear stress generated by the mismatch of thermal expansion coefficient between chip and substrate. Their impact strength was the lowest, and the toughening effect was so significant that the improvement was about 48% compared to ECAs. © 2013 Society of Chemical Industry     

铸铁焊接性能与工艺的分析讨论

阐述了铸铁焊接的难点。通过分析铸铁的成分和焊接的冶金过程，为不同的铸铁缺陷的补焊提供了合理的工艺方法及措施。     

在线识别烧结矿质量指标的研究

在对烧结机尾断面红外热图像进行特征提取的基础上，采用最小二乘回归分析方法进行自变量特征相关性的消除，同时进行信息降维和建立烧结矿质量指标的在线识别模型，取得了较好的效果。     

TRPO 萃取-固体荧光法测定土壤和空气尘埃中的铀

本文介绍了用 TRPO 萃取-固体荧光法测定土壤和空气尘埃中铀的方法。用混合铵盐和硫酸-硝酸分别预处理土壤和空气尘埃样品,在硝酸体系中用30%TRPO 的 OK 溶液萃取铀,制备 NaF 熔珠,测定铀含量。实验结果表明,本方法对土壤和空气尘埃样品中铀的全程回收率分别为(89.6±11.8)%和(85.5±5.6)%,灵敏度分别为0.03μg/g 和0.2pg/L。     

现代陶瓷产品的语义学研究

语义学是研究语言意义的学问。产品语义学是研究产品的形态在使用情境中的象征特性,以及如何应用在产品创作上的学问。现代陶瓷产品因其兼具适用和美观两大属性而备受人们青睐。陶瓷产品设计师对意识、形态、观念的整理和创造常通过泥性、釉色、肌理、烧成等多种语义特点来表达和诉求。而这种诉求的不断升华最终促成了当代中国的陶瓷产品重新叩开了现代日用陶瓷艺术之门,形成了鲜明的自我语义特征。     

智能数字型强震观测与分析系统

介绍了智能数字型强震观测系统，给出了其技术指标，组成结构及特点，该系统采用固态存储，智能编程控制，Ｗｉｎ９５界面等先进的设计思想，测试结果证明，该系统可满足一般强震观测的要求。     

408UL仪器LAUX±24V电源电路原理分析

LAUX作为CM408和野外排列连接的接口,在408UL仪器整个数据链路中起着关键作用.鉴于LAUX硬件故障多数出现在电源电路上,本文根据LAUX实物绘出了它的土24V电源电路原理图,并对该部分电路的工作原理进行了深入分析.     

Millimeter Wave Passive Detection Simulation System

In this paper, millimeter wave Radiometer Dynamic Simulation system (RDS) is presented as a typical pre-verification system. Before designing hardware circuit, we can utilize RDS system to simulate radiometric working orders by presetting its technical parameters and simulation environment. Thus it can improve radiometric validity and accuracy on target detection and pattern recognition. On the basis of discussing radiation characteristic and mathematical model, a system framework was proposed.