A short communication on growing Jatropha in Oman

A stripping technique has been used to cencentrate selected hydrocarbons present in water samples at the parts per billion level for analysis by gas chromatography. The chromatograms of hydrocarbons thus stripped from several different water samples show similarities. Washing out of atmospheric pollutants by rainfall is postulated as an explanation of these results. This hypothesis is supported by a comparison of the data with those for trace atmospheric analysis. The comparison shows that the same compounds are present in similar relative amounts both in water samples and the atmosphere. After a period of rain the atmospheric concentrations decrease whilst the water bound concentrations increase.     

Batch adsorption of organic pollutants from oxidation pond effluents using fly ashes

The batch shaking adsorption study was conducted to determine the potential of fly and volcanic ashes in removing organic pollutants from oxidation pond effluents. Factors affecting organic pollutant removals, such as concentrations and sizes of fly and volcanic ashes, initial pond effluent organic concentrations, washed and unwashed conditions of fly and volcanic ashes, were investigated. The TOC (total organic carbon) removal efficiency varied from 30 to 58 percent. The organic removal efficiency increased with increasing ash concentrations, with decreasing initial pond effluent organic concentrations and with decreasing sizes of ashes.     

提高高温差地区40 m曲线箱梁外观质量一次合格率

混凝土构造物中出现外观质量问题是混凝土施工过程中最为常见的质量通病。在较为恶劣的施工环境下提高外观质量合格率这一问题不仅具有现实意义,同时对今后西部地区的类似工程施工也具有促进作用。     

全密封消防防化服

江苏省泰州市鸿宝凯利消防器材厂研制开发的全密封消防防化服 ,是采用 PVC双面涂复织物材料制作 ,由带大视窗的连体头罩、呼吸器背囊、耐穿刺防化胶靴、防化阻燃五指手套、密封拉链、超压排气阀、通风系统组成 ,并与空气呼吸器配套使用。该防化服主要适用于消防员在有危险性化学物品、腐蚀性物质及有害气体的事故现场抢险救援时穿着。已经国家消防装备质量监督检验中心型式检验合格 ,符合 Q/ 32 12 0 3CAA0 13- 2 0 0 1《全密封消防防化服》标准要求。其主要参数与使用、维护方法如下 :一、主要技术参数1.防酸渗透性能 (10 mm/ h)、(80 %…     

Biocompatible electrospun tactic poly(methyl methacrylate) blend fibers

Uniform and beads free fibers of pristine syndiotactic PMMA (s-PMMA), isotactic PMMA (i-PMMA), and their blends in the ratio of s:i = 3:1, 1:1 and 1:3 were successfully prepared using the electrospinning technique. The tactic PMMA blend fibers showed unique thermal stability and glass transition temperatures compared to their pristine counterparts. An interesting endotherm peak was observed for the s:i = 1:3 electrospun fibers, which might indicate a complex formation between the two tactic PMMAs. Systematic surface functionalities study by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) revealed the interactions between these two tactic PMMAs. Biocompatibility of tactic PMMA and their blend fibers was first time comparably investigated using HeLa as the model mammalian cell line; an intriguing observance was first revealed that the blend fibers showed better biocompatibility than both pristine ones, though the behind mechanism is not well understood yet.     

TiB2 Powders Synthesis by Borothermal Reduction in TiO2 Under Vacuum

TiB₂ powders were synthesized by borothermal reduction in nanoscale TiO₂ with boron under vacuum. Reaction processes were investigated, and the effect of by‐product B₂O₃ was evaluated. Results showed that TiO₂ was firstly reduced by boron to form TiBO₃ and Ti₂O₃, and then to produce TiB₂ and B₂O₃ with increasing temperature. The reaction processes of TiB₂ powders synthesis included two‐step reduction in TiO₂ by boron and the removal of B₂O₃. The presence of B₂O₃, which was previously reported as the most important factor in promoting the coarsening of ZrB₂ and HfB₂ powders by borothermal reduction, did not lead to significant coarsening of TiB₂ powders. Due to the minor effect of B₂O₃, TiB₂ powders with small particle size and low oxygen content could be prepared by direct heat treatment of TiO₂ and boron at 1550°C under vacuum for 1 h. The particle size and oxygen content of synthesized TiB₂ powders were ~0.9 μm and ~1.7 wt%, respectively.     

Sintering Behavior and Dielectric Properties of Ultra‐Low Temperature Fired Silver Molybdate Ceramics

Ag₂MoO₄ ceramic was prepared by using the solid‐state reaction method, which could be sintered at 450°C for 2 h, having a relative permittivity of 8.08, a Qf value of 17 000 GHz, and a temperature coefficient of resonance frequency about ?133 ppm/°C. Ag₂MoO₄ ceramic was chemically compatible with silver but reacted seriously with aluminum to form (Ag_0.5Al_0.5)MoO₄ during the sintering. The fitting of infrared spectra and the Shannon's additive rule were employed to study intrinsic dielectric behaviors of the ceramics at microwave region. Ionic displacive polarization and the electronic polarization contributed almost equally to the dielectric permittivity of the ceramic at microwave region. The Ag₂MoO₄ ceramics could be a good candidate for ultra‐low temperature co‐fired microwave devices.