Systematic study of back pressure and anode stoichiometry effects on spatial PEMFC performance distribution

A segmented cell system was applied to investigate the effects of the anode and cathode back pressure and hydrogen stoichiometry on fuel cell performance in terms of overpotential distributions along the flow field. The segmented cell system was designed with closed loop Hall sensors and a data acquisition system allowing simultaneous spatial electrochemical impedance spectra (EIS) measurements. It was determined that an increase in back pressure for the tested serpentine flow field design results in an improvement of the cell performance and uneven improvement of individual segments’ performance. In general, the performance and the overpotentials become more uniform downstream with an increase in the back pressure due to a decrease in activation and mass transfer losses. Spatial EIS data for the PEMFC operated at different back pressures support the overpotential analysis. Hydrogen stoichiometry variations do not affect the performance of the cell or the individual segments at low current density because there is no significant hydrogen concentration gradient in the flow field. However, at high current densities a reduction in hydrogen stoichiometry produces a slight decrease in performance for inlet segments while outlet segments showed a noticeable performance loss. The decrease in performance is attributed to an increase in mass transfer losses due to nitrogen diffusion from the cathode to the anode. This effect becomes more pronounced for the outlet segments due to a downstream nitrogen accumulation. Under high current density conditions, the cell is locally fuel starved even with a high fuel stoichiometry creating conditions leading to cell degradation by carbon corrosion. More importantly, this local degradation is masked by the overall cell performance which remains largely unaffected.     

Assessment of biodiesel blending detection capability of the on-board diagnostic of the last generation automotive diesel engines

Results of a research project aimed at studying the capability to develop a method (economic and simple) for on-board biodiesel blending detection are described. The method is based on the direct measurement of the Indicated Mean Effective Pressure (IMEP).The study was carried out on a 2.0L four-cylinder “torque-controlled” Euro 5 diesel engine for passenger car (PC) application. This engine, equipped with instrumented glow plug for combustion closed-loop control, represents the state of the art of the diesel engine control technology.Two biodiesels were chosen for the experiments: a rapeseed methyl-ester (RME) and an aged RME, while the conventional diesel fuel was an European (EU) certification diesel fuel.Results indicate generally a good response in blending detection of the method. However, in order to attain an acceptable accuracy, a pre-calibration appears necessary.     

Antibacterial effect of thiocyanate substituted poly(vinyl chloride)

Poly(vinyl chloride) (PVC) modified in different solvents by nucleophilic substitution with thiocyanate was exposed to Gram-negative bacteria of the strain Staphylococcus capitis. All modified pieces reduced the adhesion of bacteria by between 67 and 79%. More important for the bacteria suppression than the substitution rate was the ratio between thiocyanate and isothiocyanate groups. The best result was obtained with PVC modified in tetrahydrofuran/dimethylsulfoxide, containing only antibacterial active isothiocyanate groups, while inactive thiocyanate groups were absent.     

Conversion and hydroconversion of hydrocarbons on zeolite-based catalysts: an FT-IR study

The interaction of HZSM5 and Mo-ZSM5 with benzene, naphthalene, toluene, ortho-xylene, para-xylene, n-butane, isobutane, n-heptane, and methylcyclohexane, in the range 100–773 K has been investigated using FT-IR spectroscopy. Hydrogen bonded species with the internal bridging and the external terminal OHs has been detected. The reactivity at high temperature has also been studied. The access to the internal cavities and to the strongly acidic OHs is at least partly hindered in the case of Mo-ZSM5. The catalytic activity of ZSM5 was moderated by the addition of molybdenum, with lower cracking and higher liquid yields.     

An FT-IR study of the adsorption of aromatic hydrocarbons and of 2,6-lutidine on H-FER and H-ZSM-5 zeolites

The interaction of aromatic hydrocarbons benzene, toluene, o-, m- and p-xylene and of methyl pyridines (in particular 2,6-lutidine) with H-ZSM-5 and H-FER zeolites has been studied. Two different H-ZSM-5 samples with strongly different intensity ratios between the two main OH stretching bands have been used. Benzene, toluene and p-xylene enter easily the cavities and give rise to three different H-bonded complexes. Two of them are strongly bonded while the third is likely a very hindered and distorted one. o-Xylene enters slowly the cavities and m-xylene even more slowly. Faster diffusion occurs at higher temperatures. On the contrary, xylenes do not enter the FER cavities. In spite of its steric hindrance, supposed to be the same of m-xylene, 2,6-lutidine enters fast the ZSM channels and is protonated by the internal sites. On the contrary, it does not enter the FER cavities, but it is protonated too on the external silanols sites. Evidence is provided for some kind of heterogeneity of the internal sites of ZSM-5 zeolite. Additionally, it is concluded that other effects besides the molecular sieving effect may play a role in the access and diffusion of molecules into the zeolite channels.     

Effect of Mechanical Constraint on Domain Reorientation in Predominantly {111}‐Textured Lead Zirconate Titanate Films

Ferroelectric/ferroelastic domain reorientation was measured in 2.0 μm thick tetragonal {111}‐textured PbZr_0.30Ti_0.70O₃ thin films using synchrotron X‐ray diffraction (XRD). Lattice strain from the peak shift in the 111 Bragg reflection and domain reorientation were quantified as a function of applied electric field amplitude. Domain reorientation was quantified through the intensity exchange between the 112 and 211 Bragg reflections. Results from three different film types are reported: dense films that are clamped to the substrate (as‐processed), dense films that are partially released from the substrate, and films with 3% volume porosity. The highest amount of domain reorientation is observed in grains that are misoriented with respect to the {111} preferred (domain engineered) orientation. Relative to the clamped films, films that were released from the substrate or had porosity exhibited neither significant enhancement in domain reorientation nor in 111 lattice strain. In contrast, similar experiments on {100}‐textured and randomly oriented films showed significant enhancement in domain reorientation in released and porous films. Therefore, {111}‐textured films are less susceptible to changes in properties due to mechanical constraints because there is overall less domain reorientation in {111} films than in {100} films.     

Targeting Serotonin 2A and Adrenergic α1 Receptors for Ocular Antihypertensive Agents: Discovery of 3,4‐Dihydropyrazino[1,2‐b]indazol‐1(2H)‐one Derivatives

Glaucoma affects millions of people worldwide and causes optic nerve damage and blindness. The elevation of the intraocular pressure (IOP) is the main risk factor associated with this pathology, and decreasing IOP is the key therapeutic target of current pharmacological treatments. As potential ocular hypotensive agents, we studied compounds that act on two receptors (serotonin 2A and adrenergic α₁) linked to the regulation of aqueous humour dynamics. Herein we describe the design, synthesis, and pharmacological profiling of a series of novel bicyclic and tricyclic N2‐alkyl‐indazole‐amide derivatives. This study identified a 3,4‐dihydropyrazino[1,2‐b]indazol‐1(2H)‐one derivative with potent serotonin 2A receptor antagonism, >100‐fold selectivity over other serotonin subtype receptors, and high affinity for the α₁ receptor. Moreover, upon local administration, this compound showed superior ocular hypotensive action in vivo relative to the clinically used reference compound timolol.     

Lipase-based quantitation of triacylglycerols in cellular lipid extracts: Requirement for presence of detergent and prior separation by thin-layer chromatography

A protocol, based on the use of Pseudomonas lipase, is presented to measure quantitatively the amount of triacylglycerols in extracts from cultured cells or tissues. Since the lipase also acts on di- and monoacylglycerols, separation of the extracts by thin-layer chromatography is recommended. In order to allow the lipase-catalyzed hydrolysis to proceed efficiently, lipid extracts or eluates from silica scraping were mixed with the detergent Thesit [dodecylpoly(ethylene glycol ether)], prior to drying. After dissolution of the dried residues in water, the amount of triacylglycerols was quantified using Pseudomonas sp. lipase, glycerol kinase, glycerol-phosphate oxidase, and peroxidase. The activity of the latter enzyme was followed either colorimetrically in the presence of 4-aminoantipyrine and 2,4,6-tribromo-3-hydroxybenzoic acid or fluorimetrically in the presence of homovanillic acid.     

Effects of cutting angle,edge preparation,and nano-structured coating on milling performance of a gamma titanium aluminide

Gamma titanium aluminides are intermetallic alloys. Recently, they have been evaluated as important contenders for structural applications in the automotive and aerospace sectors. This is due to their excellent high-temperature performances and their significantly lower density compared to nickel-based superalloys. In this paper, an analysis of machinability of a gamma TiAl obtained via an electron beam melting (EBM) process is presented. The effects of tool geometry modifications, in terms of cutting tool angles and cutting edge preparation, were investigated. The reduction of radial rake angle and the drag finishing process for cutting edge preparation resulted in an increase of the tool life of the carbide end mills. Nanogradient tool coatings were also observed to affect tool wear during milling tests, and the results highlight that AlSiTiN coating performs better compared to CrAlSiN coating. A post-coating polishing treatment was also taken into account, and it allowed a further reduction of tool wear. The overall results indicate that the machinability of this difficult-to-cut material can be significantly improved by an adjustment of the cutting edge geometry, and by using an AlSiTiN coating system.