Learning organisation and human resources management practices: an exploratory research in medium-sized enterprises undergoing a lean implementation

Despite the fact that Lean Manufacturing (LM) implementation has been widely discussed in the literature, a reduced number of works focus on medium-sized enterprises (MEs). Such gap becomes more evident when searching for works exploring the dimensions of learning organisation (DLO) that surround LM implementation in MEs. This paper aims at assessing DLO maturity and the importance of human resources management (HRM) practices in MEs that are starting LM implementation. We verify the applicability of a method for assessing maturity levels of DLO and HRM practices in seven different MEs. The method was originally conceived for large enterprises well advanced in the lean implementation process; it combines concepts of HRM and organisational learning with lean implementation roadmaps. Adapting the method for application in MEs allows such companies to anticipate and minimise organisational learning problems by conducting appropriate HRM practices, leading to a more effective LM implementation. We conclude that the method is a suitable diagnostic tool for MEs, indicating which phases of the lean roadmap are better prepared to be implemented.     

Moisture effects on greenhouse gases generation in nitrifying gas-phase compost biofilters

Gas-phase compost biofilters are extensively used in concentrated animal feeding operations to remove odors and, in some cases, ammonia from air sources. The expected biochemical pathway for these predominantly aerobic systems is nitrification. However, non-uniform media with low oxygen levels can shift biofilter microbial pathways to denitrification, a source of greenhouse gases. Several factors contribute to the formation of anoxic/anaerobic zones: media aging, media and particle structure, air velocity distribution, compaction, biofilm thickness, and moisture content (MC) distribution. The present work studies the effects of media moisture conditions on ammonia (NH₃) removal and greenhouse gas generation (nitrous oxide, N₂O and methane, CH₄) for gas-phase compost biofilters subject to a 100-day controlled drying process. Continuous recordings were made for the three gases and water vapor (2.21-h sampling cycle, each cycle consisted of three gas species, and water vapor, for a total of 10,050 data points). Media moisture conditions were classified into three corresponding media drying rate (DR) stages: Constant DR (wetter media), falling DR, and stable-dry system. The first-half of the constant DR period (0-750 h; MC = 65-52%, w.b.) facilitated high NH₃ removal rates, but higher N₂O generation and no CH₄ generation. At the drier stages of the constant DR (750-950 h; MC = 52-48%, w.b.) NH₃ removal remained high but N₂O net generation decreased to near zero. In the falling DR stage (1200-1480 h; MC = 44-13%) N₂O generation decreased, CH₄ increased, and NH₃ was no longer removed. No ammonia removal or greenhouse gas generation was observed in the stable-dry system (1500-2500 h; MC = 13%). These results indicate that media should remain toward the drier region of the constant DR (in close proximity to the falling DR stage; MC = 50%, approx.), to maintain high levels of NH₃ removal, reduced levels of N₂O generation, and nullify levels of CH₄ generation.     

Modeling and Optimization of Lactic Acid Production using Cashew Apple Juice as Substrate

The production of lactic acid by Lactobacillus casei B-442 was studied and modeled. Sugar feedstock was provided using cashew apple juice, an alternative glucose and fructose feedstock that proved to yield high concentrations of lactic acid. The fermentations were carried out in a 1-L fermenter under constant agitation (150 rpm) and controlled pH (6.5). Lactic acid production was evaluated through a dynamic study, varying the initial concentration of sugar in the range of 20 to 60 g/L. Biomass, reducing sugars, and lactic acid concentration were measured throughout the experiments. The highest production of lactic acid (59.3 g/L) was obtained operating the fermentation with 60 g/L of reducing sugar from the cashew apple juice. A rigorous kinetic model was developed for batch fermentation of cashew apple juice for lactic acid production by L. casei B-442. The growth of biomass and lactic acid production were affected by substrate limitation, substrate inhibition and lactic acid inhibition. The model assumed growth- and non-growth-associated lactic acid production and a term for microorganism death was also included in the model. Parameters of the kinetic model were determined based on experimental data by using the least mean squares method and Levenberg–Marquardt algorithm. The model validation was performed and the model was statistically able to fit the profiles for growth of biomass, sugar consumption and lactic acid production. The optimization of the process, using the model, was carried out and the optimum operating conditions aiming highest productivity, lowest production cost and highest gross profit are presented.     

Endocrine modulation of the recipient environment affects development of bovine testis tissue ectopically grafted in mice

Testis tissue xenografting is a powerful approach for the study of testis development and spermatogenesis, and for fertility preservation in immature individuals. In bovine testis xenografts, maturation and spermatogenesis are inefficient when compared to other species. To evaluate if exogenous modulation of the endocrine milieu in recipient mice will affect spermatogenic efficiency in xenografts from newborn calves, recipient mice were treated with the GnRH antagonist acyline (5 mg/kg s.c. every 2 weeks) to reduce testosterone production in xenografts, or with 6-N-propyl-2-thiouracil (PTU, 0.1% in drinking water for 4 weeks), to induce transient hypothyroidism in recipient mice respectively. Both treatments altered developmental parameters of testis xenografts and reduced germ cell differentiation. While the effects of acyline treatment can be attributed to inhibition of GnRH and gonadotropin action, lower Sertoli cell numbers and decreased seminiferous tubule length observed after PTU treatment were opposite to effects reported previously in rats. Regardless of treatment, Sertoli cells underwent only partial maturation in xenografts as Müllerian inhibiting substance and androgen receptor expression were lower than in donor and adult tissue controls respectively. In conclusion, although treatments did not result in improvement of maturation of bovine testis xenografts, the current study demonstrates that exogenous modulation of the endocrine milieu to affect xenograft development in recipient mice provides an accessible model to study endocrine control of spermatogenesis in large donor species.     

Gate sizing using geometric programming

A two-step transistor sizing optimization method based on geometric programming for delay/area minimization is presented. In the first step, Elmore delay is minimized using only minimum and maximum transistor size constraints. In the second step, the minimized delay found in the previous step is used as a constraint for area minimization. In this way, our method can target simultaneously both delay and area reduction. Moreover, by relaxing the minimized delay, one may further reduce area with small delay penalty. Gate sizing may be accomplished through transistor sizing tying each transistor inside a cell to a same scale factor. This reduces the solution space, but also improves runtime as less variables are necessary. To analyze this tradeoff between execution time and solution quality a comparison between gate sizing and transistor sizing is presented. In order to qualify our approach, the ISCAS??85 benchmark circuits are mapped to a 45?nm technology using a typical standard cell library. Gate sizing and transistor sizing are performed considering delay minimization. Gate sizing is able to reduce delay in 21?%, on average, for the same area and power values of the sizing provided by standard-cells library. Then, the transistor sizing is executed and delay can be reduced in 40.4?% and power consumption in 2.9?%, on average, compared to gate sizing. However, the transistor sizing takes about 23 times longer to be computed, on average, using a number of variables twice higher than gate sizing. Gate sizing optimizing area is executed considering a delay constraint. Three delay constraints are considered, the minimum delay given by delay optimization and delay 1 and 5?% higher than minimum delay. An energy/delay gain (EDG) metric is used to quantify the most efficient tradeoff. Considering the minimum delay, area (power) is reduced in 28.2?%, on average. Relaxing delay by just 1?%, area (power) is reduced in 41.7?% and the EDG metric is 41.7. Area can be reduced in 51?%, on average, relaxing delay by 5?% and EDG metric is 10.2.     

Chemical composition of the fruit of Solanum sessiliflorum

is a shrub native to the upper Orinoco region of the Amazon basin, previously cultivated by Indians throughout the Amazon basin because of its edible fruits, which are rarely used nowadays. Analyses of its main components, i. e. carbohydrates, minerals and trace elements, organic acids, fatty acids, free amino acids, biogenic amines and volatile compounds, are presented. Received: 6 November 1997     

Self-organized TiO2 nanotube arrays: synthesis by anodization in an ionic liquid and assessment of photocatalytic properties

Self-organized TiO(2) nanotube (NT) arrays were produced by anodization in ethylene glycol (EG) electrolytes containing 1-n-butyl-3-methyl-imidazolium tetrafluoroborate (BMI.BF(4)) ionic liquid and water. The morphology of the as-formed NTs was considerably affected by changing the anodization time, voltage, and water and ionic liquid electrolyte concentrations. In general, a nanoporous layer was formed on the top surface of the TiO(2) NTs, except for anodization at 100 V with 1 vol % of BMI.BF(4), where the NT's mouth was revealed. The length and bottom diameter of the NTs as well as the pore diameter of the top layer showed a linear relationship with increased anodization voltage. These TiO(2) NTs were tested as photocatalysts for methyl orange photodegradation and hydrogen evolution from water/methanol solutions by UV light irradiation. The results show that the TiO(2) NTs obtained by anodization in EG/H(2)O/BMI.BF(4) electrolytes are active and efficient for both applications.     

Polyimide aerogels cross-linked through amine functionalized polyoligomeric silsesquioxane

We report the first synthesis of polyimide aerogels cross-linked through a polyhedral oligomeric silsesquioxane, octa(aminophenyl)silsesquioxane (OAPS). Gels formed from polyamic acid solutions of 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA), bisaniline-p-xylidene (BAX) and OAPS were chemically imidized and dried using supercritical CO(2) extraction to give aerogels having density around 0.1 g/cm(3). The aerogels are greater than 90 % porous, have high surface areas (230 to 280 m(2)/g) and low thermal conductivity (14 mW/m-K at room temperature). Notably, the polyimide aerogels cross-linked with OAPS have higher modulus than polymer reinforced silica aerogels of similar density and can be fabricated as both monoliths and thin films. Thin films of the aerogel are flexible and foldable making them an ideal insulation for space suits, and inflatable structures for habitats or decelerators for planetary re-entry, as well as more down to earth applications.     

A distributed data storage protocol for heterogeneous wireless sensor networks with mobile sinks

This paper presents ProFlex, a distributed data storage protocol for large-scale Heterogeneous Wireless Sensor Networks (HWSNs) with mobile sinks. ProFlex guarantees robustness in data collection by intelligently managing data replication among selected storage nodes in the network. Contrarily to related protocols in the literature, ProFlex considers the resource constraints of sensor nodes and constructs multiple data replication structures, which are managed by more powerful nodes. Additionally, ProFlex takes advantage of the higher communication range of such powerful nodes and uses the long-range links to improve data distribution by storage nodes. When compared with related protocols, we show through simulation that Proflex has an acceptable performance under message loss scenarios, decreases the overhead of transmitted messages, and decreases the occurrence of the energy hole problem. Moreover, we propose an improvement that allows the protocol to leverage the inherent data correlation and redundancy of wireless sensor networks in order to decrease even further the protocol’s overhead without affecting the quality of the data distribution by storage nodes.