年产200吨4，4’-二氟二苯甲酮（DFBP）的工业化设计及可行性研究

本文在大量实验数据基础上，对4，4’-二氟二苯甲酮(DFBP)进行了年产200吨规模的工业化设计，从技术关键、工艺流程、设备选材、三废治理及成本核算等方面对DFBP工业化设计的可行性进行了评价，该设计有如下特点：工艺简单、合理，操作稳定、安全，三废治理有效，原材料及设备投资少，见效快，适合工业化大生产。     

Catalytic coal partial gasification in an atmospheric fluidized bed

The coal partial gasification catalyzed by limestone, sodium carbonate and dolomite was studied using a bench-scale atmospheric fluidized bed in the presence of air and steam at 900 °C. The effects of limestone, sodium carbonate and dolomite on composition, heating value, gas yield of product gas and carbon conversion in the catalytic coal partial gasification have been examined. The experimental results show that the catalysts can effectively improve the gas quality, the heating value and the gas yield of product gas and carbon conversion. The catalytic effect of sodium carbonate is better than that of limestone and dolomite. The increase of limestone loading can enhance the quality of product gas, such as the content of combustible gas, the high heating value and the gas yield, during coal partial gasification. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

微孔发泡过程中聚合物/超临界CO2均相体系形成的研究

阐述以超临界CO2为发泡剂的微孔发泡中均相体系的形成过程，研究聚合物熔体和气体的混合机理，并分析影响均相体系形成过程的因素。结果表明，聚合物和气体本身的结构和性质、工艺条件、加工设备、外力场等均影响均相体系的形成，振动力场的引入可以提高多相体系的混合程度，在聚合物／气体均相体系的形成过程中引入振动力场是一个全新的研究方向。     

取代2-四氢萘酮的一步合成新方法研究

本文介绍了一步法制备取代2-四氢萘酮的新方法,与常规合成方法相比,该法具有明显的优点:不需要先将羧酸转化成酰氯,避免了三氯化铝以及含氯溶剂的应用,并使催化剂得以循环利用。因此,该方法安全、环保,有望取代常规的付-克反应在工业上的应用。     

改性胶粉/SBR共混胶料的结构性能研究

研究了硫黄、促进剂、改性胶粉用量对胶粉／ＳＢＲ共混胶料性能的影响。结果表明；改性胶粉用量在１０－３５份的范围内．对共混胶料的静态力学性能影响不大：在１０－２２份的范围内对动态压缩疲劳生热影响不大．适当调整基质胶中硫黄、促进剂的用量．有利于降低胶料的动态压缩疲劳生热。扫描电子能谱微区分析的研究表明：由于硫黄的迁移形成了具有特殊结构的界面过渡层．该过渡层是降低动态压缩疲劳生热的关键。     

“中山舰”防腐保护研究

本文叙述了一种互穿网络防腐蚀涂料的性能,根据其试验结果,认为它适宜于作“中山舰”的防腐蚀和保护涂料。     

Influence of epoxy resin on the morphological and rheological properties of PBT/ABS blends compatibilized by ASMA

Polybutylene terephthalate (PBT)/acrylonitrile–butadiene–styrene (ABS) copolymer blends compatibilized by a mixture of styrene–acrylonitrile–maleic anhydride (ASMA) copolymers and epoxy resin (EP) were prepared through melt reactive extrusion. The morphological, rheological, and mechanical properties of these blends were studied. The epoxy functional groups of EP can react with anhydride groups of ASMA and the PBT terminal groups (? OH and ? COOH) simultaneously, leading to the formation of ASMA–EP–PBT graft copolymers. Because of the effective compatibilization of these copolymers at the interface, finer dispersed phase morphologies were obtained. Compared with PBT/ABS/ASMA blends, the addition of EP induced a more stable molten phase structure, with increases of storage moduli, loss moduli, and dynamic viscosities. Results indicated that 1.5 wt% of the EP in the blends was most suited for the compatibilization. Impact properties of these blends were also investigated. POLYM. ENG. SCI., 47:1943–1950, 2007. © 2007 Society of Plastics Engineers     

293K下K+/CO2-3,HCO3-、Cl-、H2O四元体系相图的研究--从农药废水中回收无机盐

用等温法测定了293K下K+/CO32-、HCO3-、Cl-、H2O四元体系的溶解度,根据溶解度数据绘制了相图,相图由KCl、KHCO3、K2CO3·3/2H2O、K2CO3·2KHCO3·3/2H2O四个相区组成.实验结果表明,K2CO3对KCl和KHCO3有强烈的盐析作用.以四元水盐体系相图理论作指导,对吡虫啉农药生产废水进行等温蒸发,分析计算了废水中各种盐的析出顺序及析出量,给出了分离氯化钾和碳酸钾较为理想的蒸发终止点,并提出了合理的工艺流程.     

Effect of different carbon fillers on the properties of PP composites: Comparison of carbon black with multiwalled carbon nanotubes

Polypropylene (PP)/carbon composites were prepared via melt blending PP with carbon fillers, including multiwalled carbon nanotubes (MWNTs) and carbon black (CB). Field‐emission scanning electron microscopy was used to research the morphology and dispersion of fillers in the PP matrix. The electrical properties, mechanical properties, and crystallization behaviors of PP/carbon composites were also investigated. The results show that the influence of MWNTs on the properties of PP composites is different with CB, which can be ascribed to the structure and aspect ratio difference between MWNTs and CB. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4823–4830, 2006     

FTIR光谱法原位快速跟踪不饱和聚酯树脂的固化反应

用富里哀变换红外光谱法原位跟踪不饱和聚酯树脂固化反应的动态过程。该方法能直接反映分子结构的变化,迅速准确地采集数据,尤其适用于快速反应体系。