Processing of CaLa2S4 infrared transparent ceramics: A comparative study of HP and FAST/SPS techniques

The densification of CaLa₂S₄ (CLS) powders prepared by combustion method was investigated by the use of Field-Assisted Sintering Technique (FAST) and Hot Pressing (HP). CLS powders were sintered using FAST at 1000°C at different pressures and heating rates and sintered by HP under 120 MPa from 800°C to 1100°C for 6 hours with a heating rate of 10°C/min. Comparison of both techniques was further realized by use of the same conditions of pressure, dwell time, and heating rate. Complementary techniques (XRD, SEM-EDS, density measurements, FTIR spectroscopy) were employed to correlate the sintering processes/parameters to the microstructural/compositional developments and optical transmission of the ceramics. Both sintering techniques produce ceramics with submicrometer grain size and relative density of about 99%. Nevertheless, HP is more suitable to densify CLS ceramics without fragmentation and also reach higher transmission than FAST. Transmission of 40%–45% was measured out of a possible maximum of 69% based on the Fresnel losses in the 8-14 μm window when HP is applied at 1000°C for 6 hours under 120 MPa. In both techniques, ceramics undergo reduction issues that originate from graphitic sintering atmosphere.     

Synthesis and Anticancer Properties of Oxazepines Related to Azaisoerianin and IsoCoQuines

In this article, we report the synthesis and biological properties of a series of novel oxazepines related to isoCA-4 having significant antitumor properties. Among them, three oxazepin-9-ol derivatives display a nanomolar or a sub-nanomolar cytotoxicity level against five human cancer cell lines (HCT116, U87, A549, MCF7, and K562). It was demonstrated that the lead compound in this series inhibits tubulin assembly with an IC₅₀ value of 1 μM and totally arrests the cellular cycle in the G2/M phase at the low concentration of 5 nM in HCT116 and K562 cells. Molecular modeling studies perfectly corroborates these promising results.     

Shear-induced migration and axial development of particles in channel flows of non-Brownian suspensions

We present an experimental study on the shear-induced migration and axial development of particles in the channel flows of non-Brownian suspensions. The suspending fluid is Newtonian. We investigate fracturing flows with a Hele-Shaw type scaling through building a unique channel setup and an advanced optical system. The local particle concentration profiles are measured via the refractive-index matching technique for a wide range of bulk volume fraction, that is, . Simultaneously, the particle image velocimetry is performed to determine the velocity profile of the particle phase. We compare our experimental results with the available two-phase continuum frameworks and show discrepancies and similarities in the fully developed and axial development of the solid volume fraction profiles. We discuss directions in which the continuum frameworks require improvements.     

Transparent polycrystalline alumina obtained by SPS: Green bodies processing effect

Starting from a commercial slurry of high purity α-Al₂O₃, freeze-dried powders, cast, filter-pressed or cold isostatically pressed samples were produced. Resulting powders or green bodies showing different particles packing were densified by spark plasma sintering (SPS) to obtain transparent polycrystalline α-Al₂O₃. Microstructure and real in-line transmittance (RIT) after SPS were dependent on the particles packing quality. Avoiding large agglomerates, narrowing the pore size distribution, reducing the most-frequent pore size (D_mode) and avoiding macroscopic heterogeneities within the green bodies enabled high RIT values to be achieved in the visible and near-infrared spectrum. However, a limit was achieved in the preparation of green bodies for which reducing the D_mode had no more influence on the optical behaviour of samples sintered by SPS. Finally, pure α-Al₂O₃ samples presenting a high RIT_640 nm value of 53% were produced from all the green bodies obtained by the following techniques: filter-pressing, slip casting and cold isostatic pressing.     

Synthesis and characterization of the polyols by air oxidation of soybean oil and its effect on the morphology and dynamic mechanical properties of poly(vinyl chloride) blends

The use of natural additives, with low toxicity and good compatibility, for PVC is becoming increasingly attractive. In this study, soybean oil additives were prepared by air oxidation reactions and blending with PVC. The oxidation reaction produced a significant increase in the number of hydroxyl groups in soybean oil; however, this kind of reaction results in the formation of a heterogeneous structure due to free radical reactions in the medium. The oxidized soybean oil improved the compatibility with PVC due to an increase in the number of polar groups, such as hydroxyls, and thus a reduction in the amount of atactic polymer was observed. Furthermore, an increase in the molecular weight of the oxidized oil, as well as large amounts of polar groups contributes to reducing the migration of oil in the PVC. Regarding the crystallinity of PVC, the use of pure and oxidized soybean oil causes small changes in the crystalline phase of the polymer. Oxidized soybean oil has great potential for usage as a secondary plasticizer for PVC. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42102.     

Palm oil deodorizer distillate as toughening agent in polylactide packaging films

Polylactide (PLA) is the most used biodegradable and biobased food packaging polymer for rigid containers and films. However, its low ductility is a hurdle for increasing its applications in flexible food packaging. A solution is the use of additives. Palm oil deodorizer distillate (PODC) is revealed to be an excellent additive promoting PLA ductility. PODC is a by‐product of vegetable oil refining, which is available in stable quality and in sufficient amounts. Amorphous PLA/PODC blends had an elongation at break of around 130% and that of semi‐crystalline blends was still around 55% compared to the initial 5% of neat PLA. At the same time the PLA rigidity and high glass transition temperatures were kept. PODC was also a very efficient processing aid, allowing for film blow extrusion. The blends were stable in properties during six months without exudation. They complied with legal norms of Food Contact Materials (EU 10/2011) and induced no sensorial alteration of packed food. Therefore PODC is a very interesting alternative to common plasticizers for the production of flexible PLA packaging films. © 2016 Society of Chemical Industry     

Characterisation of electrodeposited nanocrystalline Ni–Mo alloys

Ni–Mo nanocrystalline layers were electrodeposited using direct current from citrate–ammonia solutions. The quartz crystal microbalance investigation confirms that the discharge process starts with hydrogen evolution before the onset of the alloy deposition. The grain size was estimated from X-ray line broadening. It decreases when the molybdenum content is increased. It is smaller for layers deposited at pH 9.5 than 8.5. The microhardness exhibits a maximum close to 800 Vickers for _Mo around 17 wt%. For higher _Mo a softening is observed showing a deviation from Hall-Petch behaviour due to small grain size. In deaerated hydrochloric solutions, the layers show a large passivation domain without any pitting. The corrosion currents as well as the passivation currents, higher than for the bulk Hastelloy B alloy, decrease when _Mo is increased.     

Recycling zinc oxide varistor blocks for electro‐active silicone composites

The recycling process toward the elimination of varistor wastes into new electro‐active silicon composites has been investigated. We studied the dependence of the E‐J characteristics on the aggregate content in the polymer matrix. Formulations with 40 vol.% metal oxide varistor aggregates in the 100‐200 μm range exhibit reliable nonlinear behavior with a switching voltage of 280±30 V/mm. The breakdown voltage of the composite decreases as both filler's diameter and filler's volume fraction increases in the 550‐220 V/mm and 440‐280 V/mm range, respectively. This paves the way for the valorization of varistors based zinc oxide (ZnO) ceramics.     

Characterisation of Phenolic Compounds in Oils Produced from Frosted Olives

Frost is one of the most important weather related hazards for the Australian olive industry and it has caused significant economic losses during the last decade. Its impact on oil quality was significant in 2006 with more than 20% of Australian oil of that year being affected to some degree. Early frosts will normally affect the fruit leading to significant changes in the chemical and organoleptic characteristics of the oils. The aim of this work was to study the effect of freeze damage on the phenolic composition and quality parameters of oils from three different varieties: Frantoio, Barnea and Picual. Quality chemical parameters showed significant differences in oils produced from fruit that was frozen for 2 and 4 weeks. Those chemical parameters were not significantly different in the oil produced from fruit immediately after being frosted. Nonetheless, the sensorial profile and the polyphenols showed significant changes even with oils produced within a short time after the freezing event. Those changes became more evident with the oils produced at increasing time from the moment of fruit freezing.