Grounding and ground fault protection of multiple generator installations on medium-voltage industrial and commercial power systems - Part 4: Conclusion and Bibliography Working Group Report

This paper discusses typical grounding practices and ground fault protection methods for medium-voltage generator stators, highlighting their merits and drawbacks. Particular attention is given to applications of multiple generators connected to a single bus. The paper also provides an overview of the generator damage mechanism during stator ground faults. Problem areas associated with each type of grounding are identified and solutions are discussed. The paper also provides a list of references on the topic. The paper is intended as a guide to aid engineers in selecting adequate grounding and ground fault protection schemes for medium-voltage industrial and commercial generators for new installations, for evaluating existing systems, and for future expansion of facilities, to minimize generator damage from stator ground faults. These topics are presented in four separate parts, Parts 1-4. Part 1 covers scope, introduction, user examples of stator ground failure, and theoretical basis for the problem. Part 2 discusses various grounding methods used in industrial applications. Part 3 describes protection methods for the various types of grounding and Part 4 provides a conclusion and bibliography of additional resource material.     

Improvement in wear resistance of plasma sprayed yttria stabilized zirconia coating using nanostructured powder

Plasma sprayed yttria stabilized zirconia coatings were prepared using nanostructured and conventional powders with optimized process parameters for the highest deposition efficiency, the smallest porosity and the highest microhardness. The tribological properties of these coatings against 100C6 steel were then tested with a ball-on-disc arrangement. Results showed that although the friction coefficients of the coatings sprayed using the nanostructured powder were slightly different from those of the coatings sprayed using the conventional powder, the former coatings were more wear resistant than the latter coatings. The wear mechanisms of all the coatings were explained in terms of adhesion-induced spallation and micro-fracturing of lamellae. The improvement in wear resistance of the coatings sprayed using the nanostructured powder could be mainly ascribed to the decrease of micrometer-sized defects such as pores and interlamellar and intralamellar cracks in the coatings.     

Methane calibration burner and C‐factor determination with cone calorimeter – validation of the standardized calibration protocol

The cone calorimeter is one of the major fire tests. In its reference standard ISO 5660‐1, the apparatus (and especially a characteristic of its orifice plate mass flow meter, called C‐Factor) is calibrated using a methane burner set at 5 kW. However, measurements performed in end‐use are in the range 1–10 kW. In addition, standard proposes to check linearity at 1 and 3 kW, which means in the lowest part of the range. This communication establishes the validation of the linearity on the whole range and determines the optimal condition for C‐factor determination. It justifies the technical choices of the standard. Copyright © 2014 John Wiley & Sons, Ltd.     

Experimenting with the partnership ability φ-index on a million computer scientists

Schubert introduced the partnership ability φ-index relying on a researcher’s number of co-authors and collaboration rate. As a Hirsch-type index, φ was expected to be consistent with Schubert–Glänzel’s model of h-index. Schubert demonstrated this relationship with the 34 awardees of the Hevesy medal in the field of nuclear and radiochemistry (r ² = 0.8484). In this paper, we upscale this study by testing the φ-index on a million researchers in computer science. We found that the Schubert–Glänzel’s model correlates with the million empirical φ values (r ² = 0.8695). In addition, machine learning through symbolic regression produces models whose accuracy does not exceed a 6.1 % gain (r ² = 0.9227). These results suggest that the Schubert–Glänzel’s model of φ-index is accurate and robust on the domain-wide bibliographic dataset of computer science.     

Physiological compliance for social gaming analysis: Cooperative versus competitive play

We report the results of an empirical study demonstrating the value of using physiological compliance as a measure of social presence during digital game playing. The physiological activity (facial EMG, electrodermal activity, cardiac activity and respiration) of 21 dyads were acquired synchronously while they were playing a digital game either cooperatively or competitively and either at home or in the laboratory. Physiological compliance was defined as the correlation between the physiological signals of the dyad members. The results of this study confirm that physiological compliance is higher in a conflicting situation than when playing cooperatively. Importantly, the results also demonstrate that physiological compliance is related to self-reported social presence. This suggests that physiological compliance is not limited to negative situations but rather increases due to rich interactions. Only minor differences in physiological compliance were observed between home play and laboratory play, suggesting the ecological validity of laboratory measures. Finally, we propose that compliance measures can be considered as objective indices of social presence in digital gaming.     

Survey of 1012 moldy dwellings by culture fungal analysis: Threshold proposal for asthmatic patient management

Different countries have tried to define guidelines to quantify what levels of fungi are considered as inappropriate for housing. This retrospective study analyzes indoor fungi by cultures of airborne samples from 1012 dwellings. Altogether, 908 patients suffering from rhinitis, conjunctivitis, and asthma were compared to 104 controls free of allergies. Portuguese decree law no 118/2013 (PDL118), ANSES (a French environmental and health agency) recommendations, and health regulations of Besançon University Hospital were applied to determine the rates of non‐conforming dwellings, which were respectively 55.2%, 5.2%, and 19%. Environmental microbiological results and medical data were compared. The whole number of colonies per cubic meter of air was correlated with asthma (P < 0.001) and rhinitis (P = 0.002). Sixty‐seven genera and species were detected in bedrooms. Asthma was correlated to Aspergillus versicolor (P = 0.004) and Cladosporium spp. (P = 0.02). Thresholds of 300 cfu/m³ for A. versicolor or 495 cfu/m³ for Cladosporium spp. are able to discriminate 90% of the asthmatic dwellings. We propose a new protocol to obtain an optimal cost for indoor fungi surveys, excluding surface analyses, and a new guideline to interpret the results based on >1000 cfu/m³ of whole colonies and/or above threshold levels for A. versicolor or Cladosporium spp.     

Influence of pressurised cryogenic nitrogen technology on Arthrospira platensis (spirulina) preservation during storage

In this study, preservation of spirulina using the new pressurised cryogenic nitrogen technology (PCN) was compared to classical methods used in laboratories and industry. Spirulina morphology was better preserved by PCN compared to unpressurised cryogeny and classical freezing at −20 °C that led to cells fragmentation. A 25% loss of Phycocyanin-C content against 60% were measured after 98 days storage for 6-Bar PCN process and frozen samples, respectively. The Total AntiOxidant Power (PAOT Liquid Technology^®) was used for determination of total antioxidant and oxidant power of spirulina extracts. PAOT value of PCN samples was 50% higher than the frozen sample. From ABTS measurements on PCN spirulina fractions sonicated or not, it was suggested that pressurisation at 6 bars allowed a better preservation of free antioxidants (outside the cells) due to replacement of oxygen by nitrogen in the frozen beads. After dehydration, phycocyanin-C content variation during storage at 20 °C and 33% RH showed higher loss for freeze-dried spirulina treated at 0 compared to 6 Bars.