Synthesis of 4‐link function generating mechanisms for optimum transmission angle

Abstract

A combined equation of the expression of optimum transmission angle μ and the loop displacement equation is presented for the synthesis of plane 4‐link function generating mechanisms with the highest minimum (or optimum) μ. The expression of optimum μ is derived via the sensitivity of a function generator, and covers various types of equal deviations of μ between |90 deg‐μ_min | and |90 deg‐|μ_max |. A numerical example is given.     

The effect of aggregation on the nonlinear optical absorption performance of indium and gallium phthalocyanines in a solution and co-polymer host

The nonlinear optical properties (NLO) of Pcs can be modified by substituting different metal atoms into the ring or altering peripheral and axial functionalities. In this study, nonlinear optical absorption properties of tetra-substituted gallium and indium phthalocyanine complexes both in solution and polymeric film have been investigated by open aperture Z-scan measurements with nanosecond pulses at 532 nm. All investigated compounds exhibited reverse saturable absorption for both solution and film experiments. The investigated compounds in the solution showed better nonlinear optical absorption properties than polymeric films. The observed nonlinear optical absorption differences depending on the aggregation are discussed using the ultrafast dynamics and decay processes of excited states found from femtosecond pump-probe spectroscopy with white light continuum experiments.     

Electrodeposited nanostructured α-Fe2O3 thin films for solar water splitting: Influence of Pt doping on photoelectrochemical performance

Electrochemically deposited α-Fe₂O₃ thin films, whose composition was tuned by Pt doping, were investigated as photoanode for photoelectrochemical water splitting. Morphological and structural characteristics of the nanostructured α-Fe₂O₃ thin films were studied by scanning electron microscopy and X-ray diffraction techniques. The films were characterized by Raman spectroscopy and X-ray photoelectron spectroscopy to determine the effect of Pt doping on the α-Fe₂O₃ structure. The photoelectrochemical performance of the films was examined by linear sweep voltammetry and electrochemical impedance spectroscopy. Results of these studies showed that Pt doping increased the density of small-sized nanoparticles in α-Fe₂O₃ thin films. The Pt doped films exhibited higher photoelectrochemical activity by a factor of 1.4 over un-doped α-Fe₂O₃ films. The highest photocurrent density of 0.56 mA cm⁻² was registered for 3% pt doped film at 0.4 V versus Ag/AgCl in 1 M NaOH electrolyte and under standard illumination conditions (AM 1.5 G, 100 mW cm⁻²). This high photoactivity can be attributed to the high active surface area and increased donor density caused by Pt doping in the film. Electrochemical impedance analysis also revealed significantly low charge transfer resistance of Pt doped films, indicating its superior electrocatalytic activity for water splitting reaction compared to un-doped α-Fe₂O₃ thin films.     

Batch process schedule optimization under parameter volatility

A general strategy to treat the uncertainties in parameters of batch process scheduling has been developed. The strategy consists of three algorithms: flexible planning, flexible scheduling and reactive schedule adaptation. In this paper, we introduce the flexible scheduling and the reactive schedule adaptation algorithms. The flexible scheduling algorithm is based on both a Monte Carlo simulation and a simulated annealing. It can deal with multiple uncertain parameters and any type of probability density function for the uncertain parameter. We seek the flexible schedule that maximizes the expected profit, including net present values of products less raw material and processing costs, as well as due date penalties, inventory costs and setup costs. In reality, the values of uncertain parameters always change after the batch process schedule and plan are set up. Since the flexible schedule has periods of free time that can be used to accommodate uncertainties during the actual production, the reactive schedule adaptation algorithm can modify the flexible schedule in response to any change in an uncertain parameter with little or no penalty. This algorithm finds a new optimal or suboptimal solution under the new condition by using a combination of different local search methods, which are described.     

Poly(o-anisidine) on brass: Synthesis and corrosion behavior

The electrochemical synthesis of poly(o-anisidine) (POA) was achieved on brass (CuZn) electrode by applying two scan rates (50 and 20 mVs⁻¹). The synthesized polymer films were strongly adherent and homogeneous in both cases. Their corrosion performance was investigated by AC impedance spectroscopy (EIS) technique, anodic polarization plots and open circuit potential-time curves, in 3.5% NaCl solution. It was clearly seen that poly(o-anisidine) films provided a significant physical protection for longer exposure time. It was shown that polymer film coated at high scan rate (CuZn/POA-H) exhibited better barrier property against the attack of corrosive agents when compared with polymer film obtained at low scan rate (CuZn/POA-L). It was found out that poly(o-anisidine) film synthesized at high scan rate caused a significant increase in corrosion resistance by its catalytic behavior on formation of protective oxide layers on the surface in longer time.     

Point Defects in Pb-, Bi-, and In-Doped CdZnTe Detectors: Deep-Level Transient Spectroscopy (DLTS) Measurements

We studied, by current deep-level transient spectroscopy (I-DLTS), point defects induced in CdZnTe detectors by three dopants: Pb, Bi, and In. Pb-doped CdZnTe detectors have a new acceptor trap at around 0.48?eV. The absence of a V_Cd trap suggests that all Cd vacancies are compensated by Pb interstitials after they form a deep-acceptor complex [[Pb_Cd]⁺-V _Cd ^2? ]^?. Bi-doped CdZnTe detectors had two distinct traps: a shallow trap at around 36?meV and a deep donor trap at around 0.82?eV. In detectors doped with In, we noted three well-known traps: two acceptor levels at around 0.18?eV (A-centers) and 0.31?eV (V_Cd), and a deep trap at around 1.1?eV.     

Continuous Control of Charge Transport in Bi‐Deficient BiFeO3 Films Through Local Ferroelectric Switching

It is demonstrated that electric transport in Bi‐deficient Bi_1‐δFeO₃ ferroelectric thin films, which act as a p‐type semiconductor, can be continuously and reversibly controlled by manipulating ferroelectric domains. Ferroelectric domain configuration is modified by applying a weak voltage stress to Pt/Bi_1‐δFeO₃/SrRuO₃ thin‐film capacitors. This results in diode behavior in macroscopic charge‐transport properties as well as shrinkage of polarization‐voltage hysteresis loops. The forward current density depends on the voltage stress time controlling the domain configuration in the Bi_1‐δFeO₃ film. Piezoresponse force microscopy shows that the density of head‐to‐head/tail‐to‐tail unpenetrating local domains created by the voltage stress is directly related to the continuous modification of the charge transport and the diode effect. The control of charge transport is discussed in conjunction with polarization‐dependent interfacial barriers and charge trapping at the non‐neutral domain walls of unpenetrating tail‐to‐tail domains. Because domain walls in Bi_1‐δFeO₃ act as local conducting paths for charge transport, the domain‐wall‐mediated charge transport can be extended to ferroelectric resistive nonvolatile memories and nanochannel field‐effect transistors with high performances conceptually.     

Effects of Er:YAG laser on bond strength of self‐etching adhesives to caries‐affected dentin

The erbium:yttrium–aluminum–garnet (Er:YAG) laser may be effective the bond strength of adhesive systems on dentine surfaces, the chemical composition and aggressiveness of adhesive systems in clinical practice. The purpose of this study was to evaluate the effects of the Er:YAG laser system with the bonding ability of two different self‐etching adhesives to caries‐affected dentine in primary molars. Ninety mid‐coronal flat dentine surfaces obtained from sound and caries‐affected human primary dentine were treated with an Er:YAG laser or a bur. The prepared surfaces were restored with an adhesive system (Xeno V; Clearfil S³) and a compomer (Dyract Extra). The restored teeth were sectioned with a low‐speed saw and 162 samples were obtained. The bond strength of the adhesive systems was tested using the micro‐tensile test method. The data were statistically analyzed. A restored tooth in each group was processed for scanning electron microscopy evaluation. The values of the highest bond strength were obtained from the Clearfil S³‐Er:YAG laser‐sound dentine group in all groups. (24.57 ± 7.27 MPa) (P > 0.05). The values of the lowest bond strength were obtained from the Xeno V‐Er:YAG laser‐sound dentine group in all groups (11.01 ± 3.89 MPa). It was determined that the Clearfil S³ increased the bond strength on the surface applied with Er:YAG laser according to the Xeno V. Microsc. Res. Tech. 77:282–288, 2014. © 2014 Wiley Periodicals, Inc.