Modeling and measurement of simultaneous switching noise coupling through signal via transition

The signal via is a heavily utilized interconnection structure in high-density System-on-Package (SoP) substrates and printed circuit boards (PCBs). Vias facilitate complicated routings in these multilayer structures. Significant simultaneous switching noise (SSN) coupling occurs through the signal via transition when the signal via suffers return current interruption caused by reference plane exchange. The coupled SSN decreases noise and timing margins of digital and analog circuits, resulting in reduction of achievable jitter performance, bit error ratio (BER), and system reliability. We introduce a modeling method to estimate SSN coupling based on a balanced transmission line matrix (TLM) method. The proposed modeling method is successfully verified by a series of time-domain and frequency-domain measurements of several via transition structures. First, it is clearly verified that SSN coupling causes considerable clock waveform distortion, increases jitter and noise, and reduces margins in pseudorandom bit sequence (PRBS) eye patterns. We also note that the major frequency spectrum component of the coupled noise is one of the plane pair resonance frequencies in the PCB power/ground pair. Furthermore, we demonstrate that the amount of SSN noise coupling is strongly dependent not only on the position of the signal via, but also on the layer configuration of the multilayer PCB. Finally, we have successfully proposed and confirmed a design methodology to minimize the SSN coupling based on an optimal via positioning approach.     

力矩分配法计算超静定结构成果校核方法研究

文章对力矩分配法计算超静定结构的成果校核方法作了探讨与研究，确保最后结果弯矩的正确性。     

Design of parts and manufacturing systems for reliability and maintainability

The design of parts and manufacturing systems can be viewed from different perspectives. This paper discusses the design of parts and manufacturing systems from reliability and maintainability perspectives. A convenient method of considering reliability and maintainability is through the use of design rules which are based on empirical and theoretical knowledge. Four design rules for improvement of reliability and maintainability of systems are presented. The design rules are proven and substantiated with numerical results. The relationship between the design for reliability and maintainability rules and design for manufacturing process rules is discussed.     

小波包分解算法及Kalman滤波进行原子钟信号消噪的比较

高精度时间在国防、科研等领域正在发挥着日益重要的作用,而要提高计算原子时的准确度,消除原子钟信号的噪声是关键的步骤之一.为此,本文利用小波包分解算法对原子钟信号进行了必要的消噪处理,这样我们得到了平稳的原子钟信号,利用这些数据重新计算国家授时中心原子时TA(NTSC),计算结果表明经过消噪处理提高了TA(NTSC)稳定度和准确度;在文中还采用了目前用的比较多的Kalman滤波算法与之进行了比较,结果显示根据滤波强度的不同,此两种算法都可以达到所需要求.     

Development of a toroidal-shaped differential mobility analyzer for effective measurements of airborne particles: Experiment and modeling

Abstract

A toroidal-shaped differential mobility analyzer (DMA), called toroidal Hanyang-DMA (toroidal Hy-DMA), was developed for particle characterization. The height, width, and weight of the newly developed toroidal Hy-DMA are 8?cm, 14?cm, and 1.2?kg, respectively, indicating that it is much more compact and lighter than the TSI long-DMA; nevertheless, the classifiable particle size range is up to 400?nm. Therefore, the toroidal Hy-DMA can be useful for many applications in a limited space owing to its small size. The performance of the Hy-DMA was evaluated using tandem differential mobility analyzer (TDMA) experiments with two identical Hy-DMAs and numerical simulations using a single-particle tracking analysis in a Lagrangian framework. To simulate particle behaviors, a flow-rate-weighted particle injection method, which is more realistic, was employed, and the proposed particle tracking method can be widely applied to any non-plug flow conditions. The obtained experimental data and numerical results of central particle sizes are consistent with each other. Empirical and numerical transfer functions of the toroidal Hy-DMA were obtained and compared with those of other types of well-known DMAs. It is concluded that the toroidal Hy-DMA has an empirical transmission probability ranging from 0.5 to 0.9 and a sizing resolution ranging from 5.5 to 9.0, which indicates acceptable performance in classifying monodisperse particles within the test size range of 20 to 400?nm.

Copyright © 2019 American Association for Aerosol Research     

Lipid production in Porphyridium cruentum grown under different culture conditions

Autotrophic growth of Porphyridium cruentum under 18:12 h and 12:12 h light:dark cycles showed the maximum cell concentration of 2.1 g-dry wt./L, whereas the specific growth rate, 0.042 (1/h), at 18:6 h is faster than that of 12:12 h, 0.031 (1/h), respectively. The highest lipid accumulation level, 19.3 (%, w/w), was achieved at 12:12 h cycle. Under dark cultivation condition with 10 g/L of glucose, the lipid accumulation in the cell was 10.9 (%, w/w), whereas the heterotrophic growth with glycerol as the carbon resource showed low level of cell concentration and lipid production, compared to that of glucose. The glucose was decided to be a suitable carbon resource for the heterotrophic growth of P. cruentum. The lipids from P. cruentum seemed be feasible for biodiesel production, because over 30% of the lipid was C₁₆–C_18:1. The cultivation time and temperature were important factors to increase the maximum cell concentration. Extending the cultivation time helps maintain the maximum cell concentration, and higher lipid accumulation was achieved at 25 °C, compared to 35 °C. The fed-batch cultures showed that, under the light condition, the specific production rate was slightly decreased to 0.4% lipid/g-dry wt./day at the later stage, whereas, under the dark condition, the specific production rate was maintained to be a maximum value of 1.1% lipid/g-dry wt./day, even in the later stage of cultivation. The results indicate that the heterotrophic or 12:12 h cyclic mixotrophic growth of P. cruentum could be used for the production of biodiesel in long-term fed-batch cultivation of P. cruentum.     

Template-Free Preparation of a Mesopore-Rich Hierarchically Porous Carbon Monolith from a Thermally Rearrangeable Polyurea Network

A mesopore-rich, hierarchically porous carbon monolith was prepared by carbonizing a polyisocyanurate network derived by thermal rearrangement of a polyurea network. The initial polyurea network was synthesized by the cross-linking polymerization of tetrakis(4-aminophenyl)methane (TAPM) and hexamethylene diisocyanate (HDI) in the sol-forming condition, followed by precipitation into nanoparticulate solids in a nonsolvent. The powder was molded into a shape and then heated at 200–400 °C to obtain the porous carbon precursor composed of the rearranged network. The thermolysis of urea bonds to amine and isocyanate groups, the subsequent cyclization of isocyanates to isocyanurates, and the vaporization of volatiles caused sintering of the nanoparticles into a monolithic network with micro-, meso-, and macropores. The rearranged network was carbonized to obtain a carbon monolith. It was found that the rearranged network, with a high isocyanurate ratio, led to a porous carbon with a high mesopore ratio. The electrical conductivity of the resulting carbon monoliths exhibited a rapid response to carbon dioxide adsorption, indicating efficient gas transport through the hierarchical pore structure.