Do Not Convert Emulsions into Dynamites

The emulsion explosives have many advantages compared to dynamites from the safety point of view. However, there is a tendency to develop cartridged emulsions to be more and more dynamite-like. According to our opinion this are steps in the wrong direction. It must be better to develop blasting methods, that are adjusted to the properties of the emulsions.     

Catalytic effects of metals of the iron subgroup on the chlorination of titanium carbide to form nanostructural carbon

The effect of the reaction temperature and the metals of an iron subgroup on the thermo-chemical treatment of titanium carbide with a chlorine gas and their influence on the carbon structure obtained thereby was studied. Different analytical methods such as porosity measurements, X-ray diffraction spectrometry and a high-resolution electron microscopy revealed the catalytic behaviour of the above-mentioned metals, which appeared to support the formation of graphitised carbon at much lower temperatures compared to those needed for the ordinary thermo-chemical chlorination of titanium carbide.     

Cellulose Aerogel Fibers Tested on a REXUS 18 Rocket – The ACTOR Project

Aerogels are high‐performance materials used for space and aviation purposes. Cellulose aerogel fibers have been investigated under real space conditions for their insulation properties. The experiments were carried out in a one‐stage high‐altitude research rocket of the improved ORION type. A cuboid module with measurement cells, camera modules, and electronic devices has been developed for monitoring the insulation behavior of cellulose aerogel non‐woven samples. The thermal behavior of these samples has been analyzed and compared to cellulose cloth (cotton) and aluminum for reference.     

Alkoxide Route to La0.5Sr0.5CoO3 Films and Powders

An all-alkoxide route to films and nano-phase powders of the La_0.5Sr_0.5CoO₃ perovskite is described. To our knowledge, this is the first purely alkoxide-based route to (La_{1− x} Sr _x )CoO₃, and it yields phase-pure and elementally homogeneous perovskite at 700°C by heating at 2°C/min. At 700°C, a cubic unit cell was obtained with a _c=3.853Å, and after further heating to 1000°C, a rhombohedral cell could be indexed: a _r=5.417 Å, α_r=59.94°. Ninety to 130 nm thick films of La_0.5Sr_0.5CoO₃ were obtained by spin coating. The gel-to-oxide conversion was studied in some detail, using thermo-gravimetric analysis, differential scanning calorimetry, powder X-ray diffraction, IR spectroscopy, and transmission electron microscope equipped with an energy-dispersive X-ray spectrometer.     

Designed amyloid beta peptide fibril - a tool for high-throughput screening of fibril inhibitors

Amyloid beta peptide (Abeta) fibril formation is widely believed to be the causative event of Alzheimer's disease pathogenesis. Therapeutic approaches are therefore in development that target various sites in the production and aggregation of Abeta. Herein we present a high-throughput screening tool to generate novel hit compounds that block Abeta fibril formation. This tool is an application for our fibril model (Abeta(16-37)Y(20)K(22)K(24))(4), which is a covalent assembly of four Abeta fragments. With this tool, screening studies are complete within one hour, as opposed to days with native Abeta(1-40). A Z' factor of 0.84+/-0.03 was determined for fibril formation and inhibition, followed by the reporter molecule thioflavin T. Herein we also describe the analysis of a broad range of reported inhibitors and non-inhibitors of Abeta fibril formation to test the validity of the system.     

An optimisation strategy in a digital environment applied to neonatal chest imaging

The aim of this study was to find the optimum tube voltage for neonatal chest imaging in computed radiography. The study was designed to take full advantage of the benefits of digital imaging, for example, by comparing the tube voltages at constant effective dose. A phantom study using a living rabbit was first conducted. Images were collected at tube voltages ranging from 40 to 90 kV(p). The reproduction of four structures (central vessels, peripheral vessels, carina and thoracic vertebrae) was rated by 10 radiologists. The reproduction of both central and peripheral vessels was relatively independent of tube voltage. The carina was better reproduced at higher tube voltages whereas the opposite was true for the thoracic vertebrae. Based on the higher importance of the reproduction of the carina it was decided that 90 kV(p) was the optimal tube voltage. To validate the result from the phantom study, a follow-up study was conducted in which images of neonates collected at the tube voltage regularly used at Sahlgrenska University Hospital (70 kV(p)) were compared with images collected at the tube voltage proposed by the phantom study. The follow-up study confirmed the results from the phantom study that the reproduction of the carina was better at 90 than at 70 kV(p). In conclusion, for neonatal chest imaging-given the same effective dose-90 kVp gives better reproduction of important structures than the regularly used 70 kV(p).     

Hybrid time domain solvers for the Maxwell equations in 2D

We present a new approach to time domain hybrid schemes for the Maxwell equations. By combining the classical FD‐TD scheme with two unstructured solvers, one explicit finite volume solver and one implicit finite element solver, we achieve a very efficient and flexible second‐order scheme. The second‐order accuracy of the hybrid scheme is verified through convergence studies on perfectly conducting as well as dielectric and diamagnetic circular cylinders. The numerical results also show its superiority to the FD‐TD scheme. Copyright © 2002 John Wiley & Sons, Ltd.     

Spline-based cardiac motion tracking using velocity-encoded magnetic resonance imaging

This paper deals with the problem of tracking cardiac motion and deformation using velocity-encoded magnetic resonance imaging. We expand upon an earlier described method and fit a spatiotemporal motion model to measured velocity data. We investigate several different spatial elements both qualitatively and quantitatively using phantom measurements and data from human subjects. In addition, we also use optical flow estimation by the Horn–Schunk method as complementary data in regions where the velocity measurements are noisy. Our results show that it is possible to obtain good motion tracking accuracy in phantoms with relatively few spatial elements, if the type of element is properly chosen. The use of optical flow can correct some measurement artifacts but may give an underestimation of the magnitude of the deformation. In human subjects the different spatial elements perform quantitatively in a similar way but qualitative differences exists, as shown by a semiquantitative visual scoring of the different methods.      

Strengthening a curated web of trust in a geographically distributed project

In this article the authors present a trust management scheme, derived from the horizontal and almost anarchic web of trust model, but following a curatorship step that allows it to become a centerpiece for authentication in Debian, one of the largest and longest lived free software projects and producer of the eponymous GNU/Linux software distribution. This is done by analyzing the experience gained through a large-scale key migration process that spanned five years and nearly 100% of the originally existing keys, carried out attempting to minimize loss of keyring connectivity and strength, while keeping up to date with the best current security practices.