The photochemical heat pipe

The performance of a solar collector system for high temperature heat delivery based on a photochromic reaction is discussed. The system consists of a non-focusing collector and a reactor integrated into a flow system. In the collector, kept close to ambient temperature, the chemical potential of the photochromic system is increased through an endothermic photochemical reaction and is used to drive the reverse thermal reaction taking place in the reactor at a high temperature. No separation of the photoproducts is involved. Accordingly, the highest temperature at which heat can be delivered from the reactor is determined by the maximum attainable photostationary state in the collector and not, as in a conventional flat-plate collector, by heat-loss from the collector to the surroundings. Accordingly, the highest temperature at which heat can be delivered from the reactor is determined by the maximum attainable photostationary state in the collector and not, as in a conventional flat-plate collector, by heat-loss from the collector to the surroundings. The functioning of the device is exemplified by calculations for a model system utilizing the photodissociation of gaseous nitrosylchloride. The results show that it should be possible to build a system which, on a clear day, delivers about 100 W heat at temperature above 200°C for each m² collector area. A tenfold reduction in the radiation flux density of the incident light will only slightly reduce output efficiency.     

Inter-observer variation in masked and unmasked images for quality evaluation of clinical radiographs

PURPOSE: To investigate the influence of masking on the inter-observer variation in image quality evaluation of clinical radiographs of chest and lumbar spine. BACKGROUND: Inter-observer variation is a big problem in image quality evaluation since this variation is often much bigger than the variation in image quality between, for example, two radiographic systems. In this study, we have evaluated the effect of masking on the inter-observer variation. The idea of the masking was to force every observer to view exactly the same part of the image and to avoid the effect of the overall 'first impression' of the image. A discussion with a group of European expert radiologists before the study indicated that masking might be a good way to reduce the inter-observer variation. METHODS: Five chest and five lumbar spine radiographs were collected together with detailed information regarding exposure conditions. The radiographs were digitised with a high-performance scanner and five different manipulations were performed, simulating five different exposure conditions. The contrast, noise and spatial resolution were manipulated by this method. The images were printed onto the film and the individual masks were produced for each film, showing only the parts of the images that were necessary for the image quality evaluation. The quality of the images was evaluated on ordinary viewing boxes by a large group of experienced radiologists. The images were examined with and without the masks with a set of image criteria (if fulfilled, 1 point; and not fulfilled, 0 point), and the mean score was calculated for each simulated exposure condition. RESULTS: The results of this study indicate that-contrary to what was supposed-the inter-observer variation increased when the images were masked. In some cases, especially for chest, this increase was statistically significant. CONCLUSIONS: Based on the results of this study, image masking in studies of fulfilment of image criteria cannot be recommended.     

A conceptual optimisation strategy for radiography in a digital environment

Using a completely digital environment for the entire imaging process leads to new possibilities for optimisation of radiography since many restrictions of screen/film systems, such as the small dynamic range and the lack of possibilities for image processing, do not apply any longer. However, at the same time these new possibilities lead to a more complicated optimisation process, since more freedom is given to alter parameters. This paper focuses on describing an optimisation strategy that concentrates on taking advantage of the conceptual differences between digital systems and screen/film systems. The strategy can be summarised as: (a) always include the anatomical background during the optimisation, (b) perform all comparisons at a constant effective dose and (c) separate the image display stage from the image collection stage. A three-step process is proposed where the optimal setting of the technique parameters is determined at first, followed by an optimisation of the image processing. In the final step the optimal dose level-given the optimal settings of the image collection and image display stages-is determined.     

An optimisation strategy in a digital environment applied to neonatal chest imaging

The aim of this study was to find the optimum tube voltage for neonatal chest imaging in computed radiography. The study was designed to take full advantage of the benefits of digital imaging, for example, by comparing the tube voltages at constant effective dose. A phantom study using a living rabbit was first conducted. Images were collected at tube voltages ranging from 40 to 90 kV(p). The reproduction of four structures (central vessels, peripheral vessels, carina and thoracic vertebrae) was rated by 10 radiologists. The reproduction of both central and peripheral vessels was relatively independent of tube voltage. The carina was better reproduced at higher tube voltages whereas the opposite was true for the thoracic vertebrae. Based on the higher importance of the reproduction of the carina it was decided that 90 kV(p) was the optimal tube voltage. To validate the result from the phantom study, a follow-up study was conducted in which images of neonates collected at the tube voltage regularly used at Sahlgrenska University Hospital (70 kV(p)) were compared with images collected at the tube voltage proposed by the phantom study. The follow-up study confirmed the results from the phantom study that the reproduction of the carina was better at 90 than at 70 kV(p). In conclusion, for neonatal chest imaging-given the same effective dose-90 kVp gives better reproduction of important structures than the regularly used 70 kV(p).     

Anaesthesia record system on handheld computers--pilot experience and uses for quality control and clinical guidelines

This paper describes a mobile information system to collect patient information for anesthesia quality control. In this system, a mobile database program was designed for use on handheld computers (Pocket PC). This program is used to collect patient data at the bedside on the handhelds, with a daily synchronization of the data between the anaesthesiologists' handhelds with the anaesthesia database. All collected data are later used for quality control analysis. Furthermore, clinical guidelines will be included on these same handhelds. During the pilot phase, data from a sample set of about 300 patients were incorporated. The processes and interfaces of the system are presented in the paper. The current mobile database system has been designed to replace the original paper-based data collection system. The individual anaesthesiologist's handheld synchronizes patient data daily with anaesthesia database center. This information database is analyzed and used not only to give feedback to the individual doctor or center, but also to review the use of the guidelines provided and the results of their utilization.     

Computer simulation of forward wave propagation in soft tissue

A method for simulating forward wavefront propagation in heterogeneous tissue is discussed. The intended application of this method is for the study of aberration produced when performing ultrasound imaging through a layer of soft tissue. A one-way wave equation that permits smooth variation in all acoustically important variables is derived. This equation also describes tissue exhibiting nonlinear elasticity and arbitrary frequency-dependent relaxation. A numerical solution to this equation is found by means of operator splitting and propagation along the spatial depth coordinate. The numerical solution is accurate when compared to analytical solutions for special cases, and when compared to numerical solutions of the full wave equation by other methods. The presented implementation provides a fast numerical method for studying the impact of aberration in medical ultrasound imaging through soft tissue--both on the transmitted beam and the nonlinearly generated harmonic beam.     

Weight reduction is not a major reason for improvement in rheumatoid arthritis from lacto-vegetarian,vegan or Mediterranean diets

Objectives  

Several investigators have reported that clinical improvements of patients with rheumatoid arthritis (RA), from participating in therapeutic diet intervention studies, have been accompanied by loss of body weight. This has raised the question whether weight reduction per se can improve RA. In order to test this hypothesis, three previously conducted diet intervention studies, comprising 95 patients with RA, were pooled. Together with Age, Gender, and Disease Duration, change during the test period in body weight, characterised dichotomously as reduction or no reduction (dichoΔBody Weight), as well as Diet (dichotomously as ordinary diet or test diet), were the independent variables. Dependent variables were the difference (Δ) from baseline to conclusion of the study in five different disease outcome measures. ΔESR and ΔPain Score were both characterised numerically and dichotomously (improvement or no improvement). ΔAcute Phase Response, ΔPhysical Function, and ΔTender Joint Count were characterised dichotomously only. Multiple logistic regression was used to analyse associations between the independent and the disease outcome variables.     

Cyclic voltammetric studies on a monocrystalline antimony electrode

Monocrystalline antimony electrodes have been studied by cyclic voltammetry in solutions containing sodium nitrate and one of the following complexing agents: TRIS [Tris (hydroxymethyl) amino methane], orthophosphate, EDTA (ethylenedinitrilo tetraacetic acid) or tartrate at an ionic strength of 0.16 The results have been compared to results obtained in a solution containing only sodium nitrate, which has been shown previously to have no effect on the Sb-electrode potential in the pH range 2–10 which was studied.The results indicate formation of soluble complexes with the ligands studied. Competing reactions seem to take place in the solutions containing orthophosphate (and presumably EDTA). The reactions between Sb(III) and TRIS or orthophosphate seem to be reversible for all practical purposes.The complex formation between Sb(III) and TRIS seems to be weak since the behaviour of the electrode is very similar in TRIS and in pure nitrate solution. TRIS is therefore suitable as a buffer for calibrating antimony electrodes.     

Analyses of the grouting results for a section of the APSE tunnel at Äspö Hard Rock Laboratory

The grouting results for a tunnel at a depth of 450 m in crystalline rock at Äspö HRL were studied. The aims were to investigate whether the methodology used resulted in a successful grouting design and producing a sufficiently dry tunnel, and whether grout penetration and inflow into the finished tunnel corresponded to the predictions. An analysis was made of data from an original cored borehole, drilled before the tunnel was constructed and mapped thoroughly with regard to fractures and transmissivities. The predicted inflow into the tunnel was calculated and found to be four times higher than the measured inflow. The latter was 5 l/min along the 70 m tunnel, considered to be a good result at the current depth. New cored control boreholes were drilled along a section of the tunnel. The inflow positions and quantities in these holes, and the positions of grout found in the corresponding cores, were compared with the data from the original borehole. It was found that at the predicted positions of larger fractures, grout was observed and there was no inflow, showing that these had been successfully sealed. At the predicted positions of small fractures, no grout was visible in the cores, and small inflows showed that the grout had not sealed these fractures. The results indicated that cement-based grout successfully sealed fractures down to a hydraulic aperture of about 50 μm but not below 30 μm. This concurs with the initial design aimed at sealing fractures larger than 50 μm.     

Spline-based cardiac motion tracking using velocity-encoded magnetic resonance imaging

This paper deals with the problem of tracking cardiac motion and deformation using velocity-encoded magnetic resonance imaging. We expand upon an earlier described method and fit a spatiotemporal motion model to measured velocity data. We investigate several different spatial elements both qualitatively and quantitatively using phantom measurements and data from human subjects. In addition, we also use optical flow estimation by the Horn–Schunk method as complementary data in regions where the velocity measurements are noisy. Our results show that it is possible to obtain good motion tracking accuracy in phantoms with relatively few spatial elements, if the type of element is properly chosen. The use of optical flow can correct some measurement artifacts but may give an underestimation of the magnitude of the deformation. In human subjects the different spatial elements perform quantitatively in a similar way but qualitative differences exists, as shown by a semiquantitative visual scoring of the different methods.