水资源缺乏地区地表水环境承载现状研究——以京津冀和西北五省(自治区)为例

本研究以主体功能区划作为控制单元进行划分,以水功能区纳污能力作为环境容量基础数据,结合国家环境保护部污染物排放统计数据,分析京津冀和西北五省(自治区)的不同主体功能区的地表水环境容量超载情况。结果显示,在水资源缺乏的京津冀和西北五省(自治区)地区,其重点开发区的氨氮排放入河量均已超出水环境容量,城镇生活污水排放是水环境氨氮容量超载的主要贡献因子。对于农产品主产区和重点生态功能区,京津冀地区水环境的化学需氧量(COD)和氨氮排放量普遍超载,而西北五省(自治区)还有19%~73%的水环境容量剩余。不同主体功能区的环境和产业政策取决于主体功能区的类型和水环境容量的超载情况。     

A Method for Performance Degradation Modeling Based upon the Accelerated Experiment

Performance degradation modeling plays an important role in prognostics and health management of mechanical system. Influenced by the complex structure of the hydraulic pump and the limited experiment standards, it is hard to establish an appropriate performance degradation model. To fulfill current requirements, a method for establishing the performance degradation model based on accelerated experiment is proposed. In order to describe the general trend of the degradation, the double-stress exponential model is firstly established as the theoretical degradation model. On this basement, combined with the characteristics of the experiment, the accelerating coefficient is settled; meanwhile, the procedures for assuring the model parameters are presented. Furthermore, based on the accelerated experiment of the hydraulic pump under various stresses, the performance degradation model is finally established. Result of the experimental analysis indicates that the proposed method is applicable and the presented model is effective to measure the performance degradation of pump.     

提高工艺安全性的FOX-7合成方法?

为了提高合成工艺的安全性,提出了一锅法制备1,1-二氨基-2,2-二硝基乙烯(FOX-7)的方法。控制反应体系温度在15℃左右,采用蠕动泵将浓硫酸连续地加入到2-甲基-4,6-二羟基嘧啶与二氯甲烷的悬浮液中,固体原料溶解后,再将发烟硝酸滴加到反应物料中,进行硝化反应;然后连续滴加水到反应器中,进行水解开环反应;再经过固液分离、洗涤和干燥,得到FOX-7。探讨了硝化剂的加料方式对收率和工艺安全性的影响。结果表明:惰性溶剂的引入,分散了反应物,硝化反应释放的热量可以及时扩散,物料温度控制更平稳,消除了物料团聚现象,而且与硝硫混酸加料相比,采用浓硫酸与发烟硝酸分步加料的方式,升温速率可降低51.0%,FOX-7的收率由63.0%提高到了82.6%,工艺的安全性显著提升。     

体外模拟胶原纤维矿化的研究进展

矿化胶原纤维是天然骨的主要成分,掌握胶原纤维的生物矿化过程、原理和调控机制对于骨修复材料的设计及骨组织的再生修复发展有重要意义。综述了体外模拟胶原纤维矿化的研究进展,主要包括胶原纤维内矿化机理和非胶原蛋白对胶原生物矿化的调控作用,以期为胶原生物矿化机理的探讨及骨组织再生修复的研究提供借鉴。     

柠檬酸根对纳米Fe_3O_4/PVA磁性复合膜性能的影响

采用化学共沉淀法制备了添加柠檬酸根前后的纳米Fe_3O_4粉体材料,用流延成膜法制备了添加柠檬酸根前后的Fe_3O_4/聚乙烯醇(PVA)复合膜。用红外光谱分析仪、古埃磁天平法、振动样品磁强计、自制磁致变形设备、发射扫描电子显微镜对添加柠檬酸根前后的纳米Fe_3O_4/PVA复合膜的结构及性能进行了表征和分析。结果表明:添加柠檬酸根纳米Fe_3O_4制备的Fe_3O_4/PVA复合膜磁化率更大、磁性能更好、磁致变形性能更大、分散性好。     

Nanoscale Lacing by Electrons

The ability to harness the optical or electrical properties of nanoscale particles depends on their assembly in terms of size and spatial characteristics which remains challenging due to lack of size focusing. Electrons provide a clean and focusing agent to initiate the assembly of nanoclusters or nanoparticles. Here an intriguing route is demonstrated to lace gold nanoclusters and nanoparticles in string assembly through electron‐initiated nucleation and aggregative growth of Au(I)‐thiolate motifs on a thin film substrate. This size‐focused assembly is demonstrated by controlling the electron dose under transmission electron microscopic imaging conditions. The Au(I)‐thiolate motifs, in combination with the molecularly mediated alignment, facilitate the interstring electrostatic and intrastring aurophilic interactions, which functions as a molecular template to aid electron‐initiated 1D lacing. The findings demonstrate a hierarchical route for the 1D assemblies with size and spatial tunable catalytic, optical, sensing, and diagnostic properties.     

New Insight into Procedure of Interface Electron Transfer through Cascade System with Enhanced Photocatalytic Activity

Recombination of photogenerated electron–hole pairs is extremely limited in the practical application of photocatalysis toward solving the energy crisis and environmental pollution. A rational design of the cascade system (i.e., rGO/Bi₂WO₆/Au, and ternary composites) with highly efficient charge carrier separation is successfully constructed. As expected, the integrated system (rGO/Bi₂WO₆/Au) shows enhanced photocatalytic activity compared to bare Bi₂WO₆ and other binary composites, and it is proved in multiple electron transfer (MET) behavior, namely a cooperative electron transfer (ET) cascade effect. Simultaneously, UV–vis/scanning electrochemical microscopy is used to directly identify MET kinetic information through an in situ probe scanning technique, where the “fast” and “slow” heterogeneous ET rate constants (K_eff) of corresponding photocatalysts on the different interfaces are found, which further reveals that the MET behavior is the prime source for enhanced photocatalytic activity. This work not only offers a new insight to study catalytic performance during photocatalysis and electrocatalysis systems, but also opens up a new avenue to design highly efficient catalysts in photocatalytic CO₂ conversion to useful chemicals and photovoltaic devices.