Improvement of SiC_p Reinforced Cast AluminiumComposites by the ROC Method

ＩｍｐｒｏｖｅｍｅｎｔｏｆＳｉＣ＿ｐＲｅｉｎｆｏｒｃｅｄＣａｓｔＡｌｕｍｉｎｉｕｍＣｏｍｐｏｓｉｔｅｓｂｙｔｈｅＲＯＣＭｅｔｈｏｄＺｈｅｎｇＱｉｆｅｉ，ＸｉｅＳｈｕｉｓｈｅｎｇ，ＹｕａｎＧｕａｎｓｅｎ，ＳｈｉＬｉｋａｉ（郑弃非）（谢水生）（袁冠森）（...     

脉冲磁场下铝合金定向凝固磁场分布数值模拟

采用ANSYS 8.0有限元分析软件对铝合金脉冲磁场定向凝固磁场分布作了数值模拟,得到了凝固过程中的磁场分布状态.结果表明:在试样中心附近磁感应强度较强,而在端部较弱.模拟结果和实验测得结果相符合.通过数值模拟,不仅可以初步了解凝固过程中的磁场分布状态,而且有助于进一步研究凝固组织细化的原因.     

The Internal Oxidation of Ternary Alloys I: The Single Oxidation of the Most-Reactive Component Under Low Oxidant Pressures

The internal oxidation of the most-reactive component C of ternary A–B–C alloys by a single oxidant is examined assuming a gas-phase oxidant pressure below the stability of the oxides of the other two components. The precipitation of the most-stable oxide leaves behind a matrix composed of a binary alloy of the two less-reactive components, whose composition affects the solubility and diffusivity of the oxidant within the region of internal oxidation, with an effect on the reaction kinetics. Approximate relations between these properties are proposed and used to predict the kinetics of internal oxidation of C under the assumption of parabolic rate law. The results obtained for the ternary alloys are compared with the behavior of binary A–C and B–C alloys with the same C content. A new important factor in establishing the difference between the internal oxidation in ternary A–B–C alloys and in binary A–C and B–C alloys under a fixed gas-phase oxygen pressure and C content is the ratio between the concentrations of A and B in the bulk ternary alloy.     

放电等离子烧结Fe3B／（Pr,Tb）2Fe14B块体纳米晶双相复合永磁体的性能

采用放电等离子烧结技术将非晶Pr4.2Tb0.3Fe78B17.5薄带制备成块状纳米晶复合磁体。研究了烧结条件对磁体密度、微观结构和磁性能的影响。结果表明，烧结温度的升高可使磁体得到高致密度，但同时由于其晶粒长大，结果导致磁性能的恶化。在最佳烧结条件下得到磁体的磁性能为Br=1．02T，JHc=220kA／m。磁体具有较好的微观结构，平均晶粒尺寸为20nm。     

Corrosion of Three Commercial Steels Under ZnCl2 –KCl Deposits in a Reducing Atmosphere Containing HCl and H2S at 400–500°C

The corrosion of three commercial steels in a reducing atmosphere containing HCl plus H₂S in the presence of ZnCl₂–KCl deposits has been investigated at 400–500°C and compared with the corrosion of the same materials in a similar gas mixture free from H₂S. The presence of H₂S in the gas accelerated the corrosion of the three commercial steels beneath ZnCl₂–KCl deposits. All materials suffered from severe corrosion with partial detachment and spalling of the external scales. Degradation of the steels resulted from the penetration of chlorine-containing species through the scale formed initially down to the metal matrix, because chorine-rich species were detected close to the alloy/scale interface. Although the corrosion resistance generally increased with increasing Cr content, even the high-Cr stainless steel SS304 is still unable to provide good corrosion resistance against the ZnCl₂–KCl deposits in the presence of H₂S due to the bad adherence of the scales to the alloy. The mechanisms of attack are discussed on the basis of thermodynamic considerations and of the active-oxidation model.     

对Al-Cu合金中α-Al及Al2Cu生长行为的探讨

研究了Al-Cu合金中α-Al和Al2Cu的生长行为,分析了初生α-Al及初生Al2Cu作为共晶核心形核的能力.结果发现,在过共晶组织中,初生相Al2Cu形貌大部分有明显的拐角,观察其平面有的呈矩形,呈现小面生长特性.而α-Al与Al2Cu共晶生长时,Al2Cu择优生长特征削弱,与α-Al耦合生长呈现非小面-非小面生长,表明Al2Cu在不同的生长阶段表现出的生长行为不同.在亚共晶组织中,初生相α-Al周围形成离异共晶的Al2Cu,而过共晶组织中初生相Al2Cu周围没有离异共晶的α-Al,表明初生相Al2Cu作为共晶层片核心的能力比初生相α-Al作为共晶层片核心的能力强.     

An analysis of the internal oxidation of binary M-Nb alloys under low oxygen pressures at 600–800°C

The corrosion of M–Nb alloys based on iron, cobalt, and nickel and containing 15 and 30 wt% Nb has been studied at 600–800°C under low oxygen pressures (10^–24 atm at 600°C and 10^–20 atm at 700–800°C). Except for the Co–Nb and Ni–Nb alloys corroded at 800°C, which formed external scales of niobium oxides, corrosion under low O₂ pressures produced an internal oxidation of niobium. This attack was much faster than expected on the basis of the classical theory. Furthermore, the distribution of the internal oxide in the alloys containing two metal phases was very close to that of the Nb-rich phase in the original alloys. These kinetic, microstructural, and thermodynamic aspects are examined by taking into account the effects of the limited solubility of niobium in the various base metals and of the two-phase nature of the alloys.     

The oxidation of two Fe−Nb alloys under low oxygen pressures at 600–800°C

The oxidation of two Fe–Nb alloys containing 15 and 30 wt.% Nb has been studied at 600–800°C under low oxygen pressures, similar to those prevailing in environments of the coal-gasification type. The reaction produced only an internal oxidation of niobium to form two niobium oxides (NbO₂ and Nb₂O₅) and in some cases a double Fe–Nb oxide. The kinetics of this reaction were very slow at 600°C but rather fast at 700 and 800°C. A peculiar feature of the internal oxidation of these alloys is that the distribution of the internal oxides follows closely that of the Nb-rich phase in the original two-phase alloys. This behavior, as well as the lack of formation of external scales of niobium oxides, is mainly a result of the limited solubility of niobium in iron and of the consequent presence of two metal phases in the alloys.     

Fe—Cr—Ni—Mo—C阀座材料的时效硬化及时效过程中的相转变

Fe-18.2Cr-6.9Ni-2.5Mo-1.5C材料铸态组成相为奥氏体和M7C_3型碳化物,在随后加热时可产生时效硬化现象,最佳时效温度为650℃。时效过程中可产生α-铁索体和M_23C_6型碳化物两个新相。     

金刚石修整滚轮CAD/CAPP集成技术研究

金刚石修整滚轮是目前最为有效的高效、高精砂轮成形修整工具，迎合了磨削技术高精、高速和高效发展趋势，内电镀高精度修整滚轮制造工艺复杂、工序多，影响制造精度因素较多，修整参数选择、滚轮图纸设计和工艺编制是生产中的关键环节。本文从分析金刚石修整滚轮设计制造的特点人手，应用CAD／CAPP集成技术实现了金刚石修整滚轮设计、工艺规程编制和技术文件管理的自动化，提高了滚轮制造工艺水平和对产品质量的控制能力，较好地解决了一些设计和工艺过程相对简单、变化较小的定型产品的CAD／CAPP集成化的问题。