A sub-circuit MOSFET model with a wide temperature range including cryogenic temperature

A sub-circuit SPICE model of a MOSFET for low temperature operation is presented.Two resistors are introduced for the freeze-out effect,and the explicit behavioral models are developed for them.The model can be used in a wide temperature range covering both cryogenic temperature and regular temperatures.     

基于GaN FET的LED微显示单片集成技术研究进展

发光二极管(LED)微显示技术由于其潜在应用而倍受关注.与主流的基于硅基驱动器的LED微显示技术不同,采用GaN场效应晶体管(FET)驱动的LED微显示技术制作的器件具有可靠性高和制作工艺简单等优势.总结了各种GaN FET驱动LED微显示的器件结构及性能,这些器件结构包括:直接利用LED外延结构制作FET驱动微型LED发光像素的横向集成结构、HEMT驱动微型LED发光像素的横向叠层结构、纳米线GaN FET驱动LED发光像素的垂直叠层结构.对基于GaN FET驱动的LED微显示技术的进展进行了综述.对GaN FET驱动的LED微显示技术的应用前景和研究方向进行了展望.     

晶向对InGaP/GaAs HBT性能的影响

在对In Ga P/ Ga As HBT特性的研究中发现,发射极长边与主对准边垂直([0 1 1 ]方向)和平行([0 1 1 ]方向)放置时,其直流电流增益和截止频率是不同的.[0 1 1 ]方向的直流电流增益远远大于[0 1 1 ]方向,而它的截止频率则略小于[0 1 1 ]方向.文献中认为电流增益的不同是压电效应产生的,但这种观点并不能很好地解释截止频率的晶向依赖性.文中用压电效应和两个互相垂直方向上发射区侧向腐蚀形状的不同很好地解释了所有实验结果     

高可靠性P-LDMOS研究

分析了沟道高电场分布产生原因及各个参数对高电场的影响,提出了两条沟道设计的原则——拉长沟道同时降低沟道浓度.模拟结果显示,两条原则能够有效地降低沟道两端的两个峰值电场,从而缓解沟道热载流子效应,提高P-LDMOS的可靠性.     

Facile Fabrication of Flexible In-Plane Graphene Micro-Supercapacitor via Flash Reduction

Flash reduction of graphene oxide is an efficient method for producing high quality reduced graphene oxide under room temperature ambient conditions without the use of hazardous reducing agents (such as hydrazine and hydrogen iodide). The entire process is fast, low-cost, and suitable for large-scale fabrication, which makes it an attractive process for industrial manufacturing. Herein, we present a simple fabrication method for a flexible in-plane graphene micro-supercapacitor using flash light irradiation. All carbon-based, monolithic supercapacitors with in-plane geometry can be fabricated with simple flash irradiation, which occurs in only a few milliseconds. The thinness of the fabricated device makes it highly flexible and thus useful for a variety of applications, including portable and wearable electronics. The rapid flash reduction process creates a porous graphene structure with high surface area and good electrical conductivity, which ultimately results in high specific capacitance (36.90 mF cm⁻²) and good cyclic stability up to 8,000 cycles.     

Hetero‐Nanonet Rechargeable Paper Batteries: Toward Ultrahigh Energy Density and Origami Foldability

Forthcoming smart energy era is in strong pursuit of full‐fledged rechargeable power sources with reliable electrochemical performances and shape versatility. Here, as a naturally abundant/environmentally friendly cellulose‐mediated cell architecture strategy to address this challenging issue, a new class of hetero‐nanonet (HN) paper batteries based on 1D building blocks of cellulose nanofibrils (CNFs)/multiwall carbon nanotubes (MWNTs) is demonstrated. The HN paper batteries consist of CNF/MWNT‐intermingled heteronets embracing electrode active powders (CM electrodes) and microporous CNF separator membranes. The CNF/MWNT heteronet‐mediated material/structural uniqueness enables the construction of 3D bicontinuous electron/ion transport pathways in the CM electrodes, thus facilitating electrochemical reaction kinetics. Furthermore, the metallic current collectors‐free, CNF/MWNT heteronet architecture allows multiple stacking of CM electrodes in series, eventually leading to user‐tailored, ultrathick (i.e., high‐mass loading) electrodes far beyond those accessible with conventional battery technologies. Notably, the HN battery (multistacked LiNi_0.5Mn_1.5O₄ (cathode)/multistacked graphite (anode)) provides exceptionally high‐energy density (=226 Wh kg^?1 per cell at 400 W kg^?1 per cell), which surpasses the target value (=200 Wh kg^?1 at 400 W kg^?1) of long‐range (=300 miles) electric vehicle batteries. In addition, the heteronet‐enabled mechanical compliance of CM electrodes, in combination with readily deformable CNF separators, allows the fabrication of paper crane batteries via origami folding technique.     

UV‐Triggered Polydopamine Secondary Modification: Fast Deposition and Removal of Metal Nanoparticles

Since the first report in 2007, polydopamine (PDA) coating has shown great potential as a general and versatile method to create functional nanocoatings on arbitrary substrates. Slow kinetics and poor controllability of the coating and secondary modification processes, however, have limited the further development of this attractive method. In this work, it is demonstrated that UV irradiation at 365 nm significantly accelerates the process of secondary modification of a PDA‐coated surface. The kinetics of both thiol and amine modifications of PDA are increased 12‐fold via UV irradiation, while the kinetics of metal ion reduction at the PDA interface is increased more than 550 times. Moreover, it is demonstrated that irradiating a PDA/metal nanoparticle composite surface with UV light at 254 nm leads to dissolution of the deposited metal nanoparticles (MNPs). Finally, grayscale metallic patterns, dynamic deposition, and removal of MNPs on PDA surface are realized with the proposed method.     

Size Switchable Nanoclusters Fueled by Extracellular ATP for Promoting Deep Penetration and MRI‐Guided Tumor Photothermal Therapy

Protein‐based theranostic agents (PBTAs) exhibit superior performance in the diagnosis and therapy of cancers. However, the in vivo applications of PBTA are largely limited by undesired accumulation, penetration, or selectivity. Here, an ATP‐supersensitive protein cluster is fabricated for promoting PBTA delivery and enhancing magnetic resonance imaging (MRI)‐guided tumor photothermal therapy. Gd³⁺‐ and CuS‐coloaded small bovine serum albumin nanoparticles (GdCuB) are synthesized as the model protein with a size of 9 nm and are encapsulated into charge switchable polycations (DEP) to form DEP/GdCuB nanoclusters of 120 nm. In blood circulation, DEP/GdCuB significantly extends the half‐lifetime and thereby enhances the tumor accumulation of GdCuB. When the clusters reach the tumor site, the extracellular adenosine triphosphate (ATP) can effectively trigger the release of GdCuB, resulting in tumoral deep penetration as well as the activation of T₁‐weighted MRI (r₁ value switched from 2.8 × 10^?3 to 11.8 × 10^?3 m ^?1 s^?1). Furthermore, this delivery strategy also improves the tumoral photothermal therapy efficacy with the MRI‐guided therapy. The study of ATP‐activated nanoclusters develops a novel strategy for tumor deep penetration and on/off imaging of PBTA by size switchable technology, and reveals the potential for MRI‐guided therapy of cancers.     

Genetic algorithm‐based content distribution strategy for F‐RAN architectures

Fog radio access network (F‐RAN) architectures provide markedly improved performance compared to conventional approaches. In this paper, an efficient genetic algorithm‐based content distribution scheme is proposed that improves the throughput and reduces the transmission delay of a F‐RAN. First, an F‐RAN system model is presented that includes a certain number of randomly distributed fog access points (F‐APs) that cache popular content from cloud and other sources. Second, the problem of efficient content distribution in F‐RANs is described. Third, the details of the proposed optimal genetic algorithm‐based content distribution scheme are presented. Finally, simulation results are presented that show the performance of the proposed algorithm rapidly approaches the optimal throughput. When compared with the performance of existing random and exhaustive algorithms, that of the proposed method is demonstrably superior.     

MPS二极管的少子特性仿真

混合pin/肖特基(MPS)二极管是广泛应用于电子电路中的快恢复功率器件,具有高击穿电压、快速开关和正向电流大等特性。对MPS二极管漂移区的少数载流子的特性进行了仿真分析。仿真结果表明,MPS二极管的p^+区向漂移区注入的少数载流子浓度随外加正向电压和pn结面积占元胞总面积比例的增大而增大。虽然漂移区的少数载流子改变了MPS二极管的工作模式,增大了电流,但是存储在漂移区的少数载流子增大了反向峰值电流和恢复时间,进而增大了功耗并降低了关断速度。折中考虑正向电流和反向恢复特性,可获得具有正向电流大、反向峰值电流小和反向恢复时间短的MPS二极管。