The relationship between bioelectrical impedance phase angle and subjective global assessment in advanced colorectal cancer

Background  

Bioelectrical Impedance (BIA) derived phase angle is increasingly being used as an objective indicator of nutritional status in advanced cancer. Subjective Global Assessment (SGA) is a subjective method of nutritional status. The objective of this study was to investigate the association between BIA derived phase angle and SGA in advanced colorectal cancer.     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

Quantitation of Cefaclor in Pharmaceutical Dosage Forms Using High Performance Liquid Chromatography

A stability-indicating high-performance liquid chromatography for the quantitation of cefaclor in pharmaceutical dosage forms has been developed. The method is accurate and precise with a percent relative standard deviation of 1.2 based on 5 readings. A number of inactive ingredients present in the capsules and suspensions did not interfere with the assay procedure. The extraction procedure from the dosage forms is very simple. The recovery from the synthetic mixtures was quantitative. The capsules which had expired 3 years ago lost only 3% of the potency. The drug appears to be very sensitive to strong acids or bases since a 5 minute boiling caused 100% degradation of drug in both the solutions.     

Quantitation of Sulfacetamide, Sulfadiazine, Sulfamerazine and Sulfame Thazine in Various Cominations Dsing High-Performance Liquid Chromatography

A reverse phase high-performance liquid chromatography method for the quantitation of sulfacetamide, sulfadiazine, sulfamerazine, and sulfamethazine in various combinations has been developed. The method is simple, accurate, precise and reproducible. The percent relative standard deviations based on 6 injections were 2.1, 0.6, 1.9, and 1.6 for sulfacetamide, sulfadiazine, sulfamerazine, and sulfamethazine, respectively. The ratio of peak heights (drug/internal standard) wer closely related (r value 0.99 or better) to concentrations (± 20% of the standard solution concentrations). The results of synthetic mixtures showed quantitative recovery and method was successfully applied to commercial dosage forms (tablets and suspension). Extraction of sulfa drugs from the dosage forms required a very simple procedure.     

A Study of Interspeaker Variability in Speaker Verification

We propose a new approach to the problem of estimating the hyperparameters which define the interspeaker variability model in joint factor analysis. We tested the proposed estimation technique on the NIST 2006 speaker recognition evaluation data and obtained 10%-15% reductions in error rates on the core condition and the extended data condition (as measured both by equal error rates and the NIST detection cost function). We show that when a large joint factor analysis model is trained in this way and tested on the core condition, the extended data condition and the cross-channel condition, it is capable of performing at least as well as fusions of multiple systems of other types. (The comparisons are based on the best results on these tasks that have been reported in the literature.) In the case of the cross-channel condition, a factor analysis model with 300 speaker factors and 200 channel factors can achieve equal error rates of less than 3.0%. This is a substantial improvement over the best results that have previously been reported on this task.     

Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Elongational viscosity of LDPEs and polystyrenes using entrance loss data

For two low‐density polyethylenes and two polystyrenes, axisymmetric and planar elongational viscosities are estimated using entrance loss data from capillary and slit rheometers, respectively. The elongational viscosity is estimated by optimizing the values of various parameters in the Sarkar–Gupta elongational viscosity model such that the entrance loss predicted by a finite element simulation agrees with the corresponding experimental data. The predicted entrance loss is in good agreement with the experimental data at high flow rates. The difference in the experimental and predicted entrance loss at lower flow rates might have been caused by large error in the experimental data in this range. POLYM. ENG. SCI., 2008. © 2007 Society of Plastics Engineers     

The schnittaxiom and unions of fuzzy subgroups

A necessary and sufficient condition for the union of an arbitrary family of fuzzy subgroups of a group to be a fuzzy group has been proposed. The criterion which gives a cut of the unit interval is called the Schnittaxiom. It has been applied successfully to investigate fuzzy subgroupness of arbitrary unions of homomorphic images and preimages.