Effect of protein level in prepartum diets on metabolism and performance of dairy cows

Multigravid Holstein cows (n = 75) were used in a randomized block design to evaluate the effect of prepartum diets formulated to supply surplus energy and incremental concentrations of protein on the nutritional status of dairy cows at parturition. Cows were blocked according to expected calving date and assigned to one of five diets: 9.7, 11.7, 13.7, 14.7, and 16.2% crude protein (CP). Dietary treatments were initiated 28 d before expected calving date and fed until parturition. A common diet was fed postpartum. Dry matter intake and milk yield were recorded daily through 90 d postpartum. Increasing the protein concentration from 9.7 to 14.7% of dry matter during the last 28 d of gestation improved responses of cows during lactation. Increasing dietary protein up to 14.7% also increased milk yield response to recombinant bovine somatotropin (rbST) during the ninth week of lactation and yields of 305-d 2x mature equivalent milk, milk protein, and milk fat. Plasma aspartate aminotransferase tended to be highest in cows fed 13.7 and 14.7% CP prepartum, but decreased linearly postpartum in response to dietary protein levels. There were no treatment differences for plasma insulin-like growth factor-1 (IGF-1) at d 60 postpartum (before rbST provision), but IGF-1 on d 90 (after rbST provision) was higher in plasma of cows fed 14.7% CP than the other diets except 13.7% CP. Close-up diets containing 13.7% CP and surplus energy produced the most beneficial outcomes during the subsequent lactation.     

Application of solid phase-microextraction (SPME) and electronic nose techniques to differentiate volatiles of sesame oils prepared with diverse roasting conditions

Headspace volatiles of sesame oil (SO) from sesame seeds roasted at 9 different conditions were analyzed by a combination of solid phase microextraction (SPME)-gas chromatography/mass spectrometry (GC/MS), electronic nose/metal oxide sensors (MOS), and electronic nose/MS. As roasting temperature increased from 213 to 247 °C, total headspace volatiles and pyrazines increased significantly (P < 0.05). Pyrazines were major volatiles in SO and furans, thiazoles, aldehydes, and alcohols were also detected. Roasting temperature was more discrimination factor than roasting time for the volatiles in SO through the principal component analysis (PCA) of SPME-GC/MS, electronic nose/MOS, and electronic nose/MS. Electronic nose/MS showed that ion fragment 52, 76, 53, and 51 amu played important roles in discriminating volatiles in SO from roasted sesame seeds, which are the major ion fragments from pyrazines, furans, and furfurals. SO roasted at 213, 230, and 247 °C were clearly differentiated from each other on the base of volatile distribution by SPME-GC/MS, electronic nose/MOS, and electronic nose/MS analyses. Practical Application: The results of this study are ready to apply for the discriminating samples using a combinational analysis of volatiles. Not only vegetable oils prepared from roasting process but also any food sample possessing volatiles could be targets for the SPME-GC/MS and electronic nose assays. Contents and types of pyrazines in sesame seed oil could be used as markers to track down the degree of roasting and oxidation during oil preparation.     

Bioinformatics of Differentially Expressed Genes in Phorbol 12-Myristate 13-Acetate-Induced Megakaryocytic Differentiation of K562 Cells by Microarray Analysis

Megakaryocytes are large hematopoietic cells present in the bone marrow cavity, comprising less than 0.1% of all bone marrow cells. Despite their small number, megakaryocytes play important roles in blood coagulation, inflammatory responses, and platelet production. However, little is known about changes in gene expression during megakaryocyte maturation. Here we identified the genes whose expression was changed during K562 leukemia cell differentiation into megakaryocytes using an Affymetrix GeneChip microarray to determine the multifunctionality of megakaryocytes. K562 cells were differentiated into mature megakaryocytes by treatment for 7 days with phorbol 12-myristate 13-acetate, and a microarray was performed using RNA obtained from both types of cells. The expression of 44,629 genes was compared between K562 cells and mature megakaryocytes, and 954 differentially expressed genes (DEGs) were selected based on a p-value < 0.05 and a fold change >2. The DEGs was further functionally classified using five major megakaryocyte function-associated clusters—inflammatory response, angiogenesis, cell migration, extracellular matrix, and secretion. Furthermore, interaction analysis based on the STRING database was used to generate interactions between the proteins translated from the DEGs. This study provides information on the bioinformatics of the DEGs in mature megakaryocytes after K562 cell differentiation.     

Bimodal grain structures and tensile properties of a biomedical Co-20Cr-15W-10Ni alloy with different pre-strains

The influence of pre-strain on the formation of bimodal grain structures and tensile properties of a Co-20 Cr-15 W-10 Ni alloy was investigated.The bimodal grain structures consist of fine grains(FGs;2-3 μm in diameter) and coarse grains(CGs;8-16 μm in diameter),which can be manipulated by changing the pre-strain(ε=0.3-0.7) and annealing temperatures(1000-1100℃).High pre-strain applied in the samples can intensify the plasticity heterogeneity through increasing the total dislocation density and the local volumes of high-density dislocations.This can essentially result in finer FGs,a higher FG volume fraction,and overall grain refinement in the samples after annealing.High-temperature essentially increases both the size and volume fraction of CGs,leading to an increase in the average grain size.The tensile test suggests that the bimodal grain structured samples exhibited both high strength and ductility,yield strengths of621-877 MPa and ultimate tensile strengths of1187-1367 MPa with uniform elongations of 55.0%-71.4%.The superior strength-ductility combination of the samples arises from the specific deformation mechanisms of the bimodal grain structures.The tensile properties strongly depend on the size ratio and volume fraction of FGs/CGs in addition to the average grain size in the bimodal grain structures.The grain structures can be modified via changing the pre-strain and annealing temperature.     

Glycosidase inhibitory phenolic compounds from the seed of Psoralea corylifolia

The seeds of Psoralea corylifolia were extracted into five different polar solvents: chloroform, 50% ethanol in water, ethanol, methanol and water. All extracts were evaluated for glycosidase inhibitory activity. The chloroform extract (CE) showed the lowest IC₅₀ values against α-glucosidase (82.9 μg/ml) and α-mannosidase (132 μg/ml). Chromatography of CE yielded nine phenolic compounds which were identified as isovabachalcone (1), 4′-O-methylbavachalcone (2), isobavachromene (3), corylifolin (4), bavachinin (5), psoralidin (6), neobavaisoflavone (7), corylifol A (8), and bakuchiol (9). All isolated compounds, apart from compound 5, possessed α-glucosidase inhibitory activities. Among them, compounds 6–8 exhibited potent inhibition with IC₅₀s of 13.7, 27.7 and 11.3 μM, respectively. Furthermore, compounds 2 and 6 showed α-mannosidase inhibitory activity. Mechanistic analysis of their inhibition modes against α-glucosidase showed that compounds (6 and 7) were noncompetitive, whereas compound 8 was mixed. Furthermore, the most active glycosidase inhibitors (2, 6–8) were proven to be present in the native seed in high quantities by an HPLC chromatogram.     

Properties of Laminated Films from Whey Powder and Sodium Caseinate Mixtures and Zein Layers

Corn zein-stearic acid films were laminated to whey powder (WP) and sodium caseinate (SC) mixture (WSM) films. WSM films were prepared at three mass ratios of WP and SC (50:50, 60:40, and 70:30 in w/w) by casting method. WSM films with poor mechanical and barrier properties were produced as the whey powder ratio of WSM increased from 50:50 to 70:30. Corn-zein lamination improved the mechanical and water barrier properties of WSM films by increasing tensile strength (TS) from 4.7-14.5 to 14.0-26.8 MPa and by decreasing water vapor permeabilities (WVP) from 0.432-0.490 to 0.386-0.422 ng m/m² s Pa. However, elongations of corn-zein laminated films were reduced from 64.5-128.0 to 2.6-4.5%. Mechanical and water barrier properties of corn-zein laminated WSM films were affected by the mass ratio of whey powder to sodium caseinate in WSM films. Addition of stearic acid up to 10 g/100 g of corn zein decreased TS and WVP of laminated films to approximately 12 MPa and 0.36 ng m/m² s Pa regardless of mass ratio in WSM film. However, no significant differences in TS and WVP were found with further addition of stearic acids.     

COMPARISON OF VARIOUS CONJUGATE GRADIENT METHODS FOR INVERSE HEAT TRANSFER PROBLEMS

Many inverse heat transfer problems can be solved efficiently through the minimization of a performance function utilizing the conjugate gradient method. The gradient of the performance function needed in the minimization procedure of the conjugate gradient method is obtained by employing either the adjoint variable method or the direct differentiation method. In the present study we consider an inverse problem of estimating time-varying strength of a heat source in a two-dimensional heat conduction system, and compare the adjoint variable method and the direct differentiation method in terms of accuracy and computational efficiency, and finally suggest a new method that exploits the advantageous aspects of both methods while avoiding the shortcomings of them.     

Synthesis of mesoporous silica in acidic condition by solvent evaporation method

Both powder-type and film-type mesoporous silica materials have been prepared by using a sol-gel process in highly acidic, solvent-rich and mild conditions by solvent evaporation method. Powder mesoporous silica which has hexagonal arrays was well synthesized within only 10 minutes, and mesoporous film was formed on the glass plate within only several seconds by supramolecular interactions between the silicate species and surfactant-templates. In particular, the synthesis time was very short compared with that of hydrothermal synthesis owing to the solvent evaporation. This method has some characteristics different from the hydrothermal method such as the following. There is no precipitation because particles do not form in the solution before solvent evaporation, bulk powder is rigid, whereas that of hydrothermal synthesis is very soft, and mesoporous materials are synthesized in acidic condition. Solvent evaporation method for the synthesis of mesoporous materials is promising because the method is very simple and time-saving.     

Particle size effect on the filtration drag of fly ash from a coal power plant

In order to investigate the filtration properties of fly ash from a conventional coal power plant, the filtration drag across the dust cake over an absolute fiberglass filter element was measured. A fluidized bed column was utilized to obtain a well characterized particle stream. The cake resistance coefficient was analyzed by the equation proposed by Endo et al. [1998] in order to observe the effect of particle size and polydispersity. The filtration drag was measured for three kinds of particle stream having the geometric mean particle size of 3.15, 6.07, and 7.83 μm and the geometric standard deviation less than 1.44 in the practical operation conditions for the field applications of face velocity of 0.03–0.06 m/s and area dust load up to 0.2 kg/m². A dust cake of smaller particle size showed larger pressure drop even though the porosity was higher and presented high compressibility according to the face velocity. The particle polydispersity was also a dominant factor affecting the compressibility of the dust cake.     

Near‐infrared‐active and pH‐responsive fluorescent polymer‐integrated hybrid graphene oxide nanoparticles for the detection and treatment of cancer

Hybrid nanoparticles for theragnosis have great potentiality to bring desire functionalities in one integrated system. The development of bioimaging guided photothermal therapy (PTT) is pivotal in optimizing cytotoxic cancer therapy. We report near‐infrared (NIR)‐active and pH‐responsive fluorescent, catechol‐conjugated, reduced graphene oxide (rGO)‐anchored hybrid nanoparticles that can sharply increase the photothermal heat in response to NIR exposure and exhibit pH‐dependent fluorescence emission for the detection of tumor areas without causing cell toxicity. The optoelectronic absorption property of poly(3,4‐ethylenedioxythiophene) [PEDOT]:dopamine‐conjugated poly(4‐styrenesulfonate‐co‐maleic acid) [D‐PSM] and 3′,4′‐dihydroxyacetophenone/boron‐dipyrromethene [CCDP/BODIPY]‐quaternized polyethylene glycol grafted poly(dimethylaminoethyl methacrylate) (C/B‐PgP) present in this hybrid nanoparticles resulted in efficient photothermal conversion with pH‐tunable fluorescence that exerted sufficient photothermal cytotoxicity to cancer cells. The in vitro cellular uptake was measured by confocal laser scanning microscopy, allowing the therapeutic efficiency and bioimaging effects to be explored. We expect that the broad optical absorption property of PEDOT:D‐PSM with BODIPY‐conjugated polymers on rGO sheets would get tremendous attraction in this enormous rising PTT with cancer detectable biomarker. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43791.