A Discrete‐Amplitude Pulse Width Modulation for a High‐Efficiency Linear Power Amplifier

A new discrete‐amplitude pulse width modulation (DAPWM) scheme for a high‐efficiency linear power amplifier is proposed. A radio frequency (RF) input signal is divided into an envelope and a phase modulated carrier. The low‐frequency envelope is modulated so that it can be represented by a pulse whose area is proportional to its amplitude. The modulated pulse has at least two different pulse amplitude levels in order that the duty ratios of the pulse are kept large for small input. Then, an RF pulse train is generated by mixing the modulated envelope with the phase modulated carrier. The RF pulse train is amplified by a switching‐mode power amplifier, and the original RF input signal is restored by a band pass filter. Because duty ratios of the RF pulse train are kept large in spite of a small input envelope, the DAPWM technique can reduce loss from harmonic components. Furthermore, it reduces filtering efforts required to suppress harmonic components. Simulations show that the overall efficiency of the pulsed power amplifier with DAPWM is about 60.3% for a mobile WiMax signal. This is approximately a 73% increase compared to a pulsed power amplifier with PWM.     

Highly Stretchable and Sensitive Strain Sensors Using Fragmentized Graphene Foam

Stretchable electronics have recently been extensively investigated for the development of highly advanced human‐interactive devices. Here, a highly stretchable and sensitive strain sensor is fabricated based on the composite of fragmentized graphene foam (FGF) and polydimethylsiloxane (PDMS). A graphene foam (GF) is disintegrated into 200–300 μm sized fragments while maintaining its 3D structure by using a vortex mixer, forming a percolation network of the FGFs. The strain sensor shows high sensitivity with a gauge factor of 15 to 29, which is much higher compared to the GF/PDMS strain sensor with a gauge factor of 2.2. It is attributed to the great change in the contact resistance between FGFs over the large contact area, when stretched. In addition to the high sensitivity, the FGF/PDMS strain sensor exhibits high stretchability over 70% and high durability over 10 000 stretching‐releasing cycles. When the sensor is attached to the human body, it functions as a health‐monitoring device by detecting various human motions such as the bending of elbows and fingers in addition to the pulse of radial artery. Finally, by using the FGF, PDMS, and μ‐LEDs, a stretchable touch sensor array is fabricated, thus demonstrating its potential application as an artificial skin.     

Virus‐Tethered Magnetic Gold Microspheres with Biomimetic Architectures for Enhanced Immunoassays

In immunoassays, non‐specific bindings to biosensing surfaces can be effectively prevented by formation of biocompatible and hydrophilic self‐assembled monolayer (SAM) on the surfaces. A thin gold (Au) layer on magnetic microspheres, 15 μm in diameter, enables facile SAM formation and thereby accepts second layer of filamentous virus scaffolds for the immobilization of functional proteins. The merger of the virus and SAM‐Au protected microspheres not only provides exceptionlly dense antibody loading, but also resembles biological cellular structures that enhance ligand‐receptor interactions. Site‐specific biotinylation of filamenous viruses allows formation of free‐standing virus threads (>1.0 × 10¹⁰) on streptavidin‐modified SAM‐Au microspheres. The augmented yield of antibody loading, due to the increased surface to volume ratio, on virus‐modified Au microspheres is confirmed by measuring fluorescence intensities. The bead‐based immunoassays for the detection of cardiac marker proteins exhibit increased sensitivity of virus‐Au microspheres, as low as 20 pg mL^?1 of cardiac troponin I in serum, and extremely low non‐specific adsorption when compared with bare polymer beads. This increased sensitivity due to filamentous morphology and SAM‐Au layer demonstrates the feasibility of merging viruses with non‐biological materials to yield biomimetic tools for the enhanced bead‐based immunoassays.     

Holography and plasma oxidation for uniform nanoscale two dimensional channel formation of vertical organic field-effect transistors with suppressed gate leakage current

Vertical organic field-effect transistors (VOFETs) with nanoscale channel openings have been fabricated using pentacene as an active layer material. To achieve uniform nanoscale two-dimensional channel openings, a laser holography lithography has been introduced. Uniformly distributed and well-aligned holes with 250 nm diameter were successfully obtained with the laser holography lithography. VOFET devices with these channel openings have shown high on/off ratio of about 10³ without any further treatment. Gate leakage current was also decreased with an additional insulating layer generated on the gate electrode sidewall via plasma oxidation.     

Photonic Crystal Palette of Binary Block Copolymer Blends for Full Visible Structural Color Encryption

Structural color (SC) arising from a periodically ordered self-assembled block copolymer (BCP) photonic crystal (PC) is useful for reflective-mode sensing displays owing to its capability of stimuli-responsive structure alteration. However, a set of PC inks, each providing a precisely addressable SC in the full visible range, has rarely been demonstrated. Here, a strategy for developing BCP PC inks with tunable structures is presented. This involves solution-blending of two lamellar-forming BCPs with different molecular weights. By controlling the mixing ratio of the two BCPs, a thin 1D BCP PC film is developed with alternating in-plane lamellae whose periodicity varies linearly from ≈46 to ≈91 nm. Subsequent preferential swelling of one-type lamellae with either solvent or non-volatile ionic liquid causes the photonic band gap of the films to red-shift, giving rise to full-visible-range SC correlated with the pristine nanostructures of the blended films in both liquid and solid states. The BCP PC palette of solution-blended binary solutions is conveniently employed in various coating processes, allowing facile development of BCP SC on the targeted surface. Furthermore, full-color SC paintings are realized with their transparent PC inks, facilitating low-power pattern encryption.     

Stretchable,Transparent Zinc Oxide Thin Film Transistors

Stretchable and transparent thin film transistors (TFTs) with intrisically brittle oxide semiconductors are built using a wavy structural configuration that can provide high flexibility and stretchability. After device fabrication procedures including high temperature annealing, the oxide semiconductor‐based TFT arrays can be transferred directly to plastic or rubber substrates, without an additional device process, using transfer printing methods. This procedure can avoid some of the thermal degradation problems associated with plastic or rubber substrates by separating them from the annealing procedure needed to improve the device performance. These design and fabrication methods offer the possibility of developing a new format of stretchable electronics.     

A novel simplified process for fabricating a very high densityp-channel trench gate power MOSFET

A novel simplified fabrication method of a very high density p-channel trench gate power MOSFET using four mask layers and nitride/TEOS sidewall spacers is realized. The proposed process showed improved on-resistance characteristics of the device with increasing cell density and the cost-effective production capability due to the lesser number of processing steps. By using this process technique, a remarkably increased high density (100 Mcell/inch²) trench gate power MOSFET with a cell pitch of 2.5 μm could be effectively realized. The fabricated device had a low specific on-resistance of 1.1 mΩ-cm² with a breakdown voltage of -36 V     

Performance of improved probabilistic location update scheme forcellular mobile networks

This paper suggests an improved probabilistic location update (IPLU) scheme for advanced cellular mobile networks. The location management cost with IPLU is analyzed, and various performance characteristics of IPLU are investigated. It is shown that IPLU has the parameter q that can be used as a control parameter to achieve the best performance when the unit location update cost (U) and the unit paging cost (P) are given. In addition, this paper provides some recommendable values of q in two cases, P>U and P⩽U. As a result, we demonstrate a merit of IPLU, that is, simple implementation with an acceptable performance level, especially, under the future cellular mobile network environments where a vast number of microcells/picocells exist and the relative user mobility is very high     

Novel ESD strategy for high voltage non-volatile programming pin application

This paper presents a novel ESD strategy for non-volatile memory (NVM) programming pin in a 0.13um/30V technology. Suggested scheme can provide not only a major current discharge path to protect the internal circuit from ESD damage but also a voltage clamping function to prevent the soft error of programmed data during the ESD event. It has been validated by TLP experiments and TCAD simulation.     

Synthesis and device application of hybrid host materials of carbazole and benzofuran for high efficiency solution processed blue phosphorescent organic light-emitting diodes

Highly efficient solution processed blue phosphorescent organic light-emitting diodes were developed using a carbazole–dibenzofuran hybrid host material. Asymmetric carbazole–dibenzofuran hybrid host material was synthesized by coupling reaction of phenylcarbazole and dibenzofuran, and it showed good film morphology and bipolar charge transport properties after solution coating. Blue phosphorescent organic light-emitting diodes fabricated by spin coating exhibited extremely high quantum efficiency of 23.9%, which was better than any other data reported for solution processed blue phosphorescent organic light-emitting diodes.