Preparation and characterization of trilobal activated carbon fibers

The objective of this research was to evaluate the effectiveness of several different methods for controlling the pore size and pore size distribution in activated carbon fibers. Variables studied included fiber shape, activation time, and the addition of small amounts of silver nitrate. Pure isotropic pitch and the same isotropic pitch containing 1 wt.% silver were melt spun to form fibers with round and trilobal cross sections. These fibers were then stabilized, carbonized, and activated in carbon dioxide. Field emission scanning electron microscopy (FE SEM), electron dispersive spectra (EDS), and wavelength dispersive spectra (WDS) were used to monitor the size and distribution of the silver particles in the fibers before and after activation. Each of these analyses showed that the distribution of silver particles was extremely uniform before and after activation. The fibers were also weighed before and after activation to determine the percent burn-off. The BET specific surface areas of the activated fibers were determined from N₂ adsorption isotherms measured at −196 °C. The results showed that round and trilobal fibers with equivalent cross-sectional areas yielded similar burn-off values and specific surface areas after activation. Also, activation rates were found to be independent of CO₂ flow rate. The porosity of the activated fibers depended on the total time of activation and the cross-sectional area of fibers. The N₂ adsorption measurements showed that the activated fibers had extremely high specific surface areas (greater than 3000 m²/g) and high degrees of meso- and macro-porosity. FE SEM was also used to investigate surface texture and size of pore openings on the surfaces of the activated fibers. The photos showed that silver particles generated surface macro- and mesopores, in agreement with the inferences from N₂ adsorption measurements.     

Characteristics of polystyrene/polyethylene/clay nanocomposites prepared by ultrasound‐assisted mixing process

In this study, polymer‐clay nanocomposites of various concentrations were prepared by ultrasonically assisted polymerization and melt‐mixing processes. A sonication process using power ultrasonic waves was employed to enhance nano‐scale dispersion during melt‐mixing of polymer blends and organically modified clay. We expected enhanced breakup of layered silicate bundles and further reduction in the size of the dispersed phase, with better homogeneity compared to the different immiscible blend pairs. X‐ray diffraction (XRD) and Transmission Electron Microscopy (TEM) were used to characterize the structures of the nanocomposites. The rheological behaviors of the obtained nanocomposites were measured with parallel plate rheometry. It was found that the ultrasound‐assisted process successfully generated exfoliated nanocomposites and promoted in‐situ compatibilization of the matrix comprising an immiscible pair of polymers in a blend. The resulting nanocomposite exhibited superior thermal stability and elastic modulus compared to the base polymer. Polym. Eng. Sci. 44:1198–1204, 2004. © 2004 Society of Plastics Engineers.     

Synthesis of silver/polymer colloidal composites from surface-functional porous polymer microspheres

This study presents a different colloidal silver (Ag)/polymer system where Ag nanoparticles are deposited uniformly onto surface-functional porous poly(ethylene glycol dimethacrylate-co-acrylonitrile) (poly(EGDMA-co-AN)) microspheres. The formation and morphology of the composite microspheres were characterized from electron microscopy and X-ray diffraction analyses. The significance of the present report is that owing to the high affinity between Ag and nitrile group (CN) on the large surface of the microspheres, the Ag nanoparticles having a face-centered cubic phase were incorporated evenly into the deep pores of the microspheres with fine size and size distribution. In the preservation test, the Ag/poly(EGDMA-co-AN) composite microspheres obtained showed an excellent anti-bacterial performance, elucidating a high applicability for a new preservative.     

Modeling and simulation of wet-end white water system in the paper mill

A dynamic model representing the wet-end of a paper mill is developed to characterize its dynamic behavior. The model is based on the mass balance relationships written for the simplified wet-end white water network. The dynamic response of the wet-end is influenced both by the white water volume and by the level of wire retention. Effects of key manipulated variables such as the thick stock flow rate, the ash flow rate and the retention aid rate on the major controlled variables are analyzed by numerical simulations. It can be said that the consistency of the model with plant data seems to be reasonably good and can be used as a tool for plant analysis and control.     

Morin,a Flavonoid from Moraceae,Induces Apoptosis by Induction of BAD Protein in Human Leukemic Cells

Evidence suggests that phytochemicals can safely modulate cancer cell biology and induce apoptosis. Here, we investigated the anti-cancer activity of morin, a flavone originally isolated from members of the Moraceae family in human leukemic cells, focusing on apoptosis. An anti-cancer effect of morin was screened with several human leukemic cell lines. U937 cells were most sensitive to morin, where it induced caspase-dependent apoptosis in a dose-dependent manner. It also induced loss of MMP (ΔΨ_m) along with cytochrome c release, down-regulated Bcl-2 protein, and up-regulated BAX proteins. The apoptotic activity of morin was significantly attenuated by Bcl-2 augmentation. In conclusion, morin induced caspase-dependent apoptosis through an intrinsic pathway by upregulating BAD proteins. In addition, Bcl-2 protein expression is also important in morin-induced apoptosis of U937 cells. This study provides evidence that morin might have anticancer properties in human leukemic cells.     

Hydrostatic Pressure Influences HIF-2 Alpha Expression in Chondrocytes

Hypoxia-inducible factor (HIF)-2α is considered to play a major role in the progression of osteoarthritis. Recently, it was reported that pressure amplitude influences HIF-2α expression in murine endothelial cells. We examined whether hydrostatic pressure is involved in expression of HIF-2α in articular chondrocytes. Chondrocytes were cultured and stimulated by inflammation or hydrostatic pressure of 0, 5, 10, or 50 MPa. After stimulation, heat shock protein (HSP) 70, HIF-2α, nuclear factor kappa B (NF-κB), matrix metalloproteinase (MMP)-13, MMP-3, and vascular endothelial growth factor (VEGF) gene expression were evaluated. The levels of all gene expression were increased by inflammatory stress. When chondrocytes were exposed to a hydrostatic pressure of 5 MPa, HIF-2α, MMP-13, and MMP-3 gene expression increased significantly although those of HSP70 and NF-κB were not significantly different from the control group. In contrast, HIF-2α gene expression did not increase under a hydrostatic pressure of 50 MPa although HSP70 and NF-κB expression increased significantly compared to control. We considered that hydrostatic pressure of 5 MPa could regulate HIF-2α independent of NF-κB, because the level of HIF-2α gene expression increased significantly without upregulation of NF-κB expression at 5 MPa. Hydrostatic pressure may influence cartilage degeneration, inducing MMP-13 and MMP-3 expression through HIF-2α.     

Effect of the Magnetostrictive Layer on Magnetoelectric Properties in Lead Zirconate Titanate/Terfenol-D Laminate Composites

Magnetoelectric laminate composites of piezoelectric/magnetostrictive materials were prepared by stacking and bonding together a PZT disk and two layers of Terfenol-D disks with different directions of magnetostriction. These composites were studied to investigate (i) dependence on the magnetostriction direction of the Terfenol-D disk and (ii) dependence on the direction of the applied ac magnetic field. Three different types of assemblies were prepared by using two types of disks: one with magnetostriction along the radial direction, the other with magnetostriction along the thickness direction. The maximum magnetoelectric voltage coefficient (d E /d H ) of 5.90 V/cm·Oe was obtained for a design where the composite was made by two Terfenol-D layers with a radial magnetostriction direction.     

Fabrication of photochromic hydrogels using an interpenetrating chitosan network

The synthesis of a novel interpenetrating chitosan network post‐modified with spiropyran (SP) derivatives has been used to develop photochromic hydrogels. We have synthesized succinyl chitosan polymers containing a considerable number of both amines and carboxylic groups. Their intra/inter molecular amide coupling reactions and postmodification with SP derivatives resulted in the photochromic hydrogels functionalized with chitosan‐based interpenetrating polymer network structures. In this hydrogel system, SPs undergo reversible photoresponsive structural switching between a ring‐closed colorless SP form and a ring‐opened purple merocyanine form under specific light‐irradiation conditions. Notably, the photo‐mediated wettabilities and color intensities of the hydrogels increase by the increment in the molecular weight of SP‐functionalized chitosans. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45120.     

Conifer Diterpene Resin Acids Disrupt Juvenile Hormone-Mediated Endocrine Regulation in the Indian Meal Moth <Emphasis Type="Italic">Plodia interpunctella</Emphasis>

Diterpene resin acids (DRAs) are important components of oleoresin and greatly contribute to the defense strategies of conifers against herbivorous insects. In the present study, we determined that DRAs function as insect juvenile hormone (JH) antagonists that interfere with the juvenile hormone-mediated binding of the JH receptor Methoprene-tolerant (Met) and steroid receptor coactivator (SRC). Using a yeast two-hybrid system transformed with Met and SRC from the Indian meal moth Plodia interpunctella, we tested the interfering activity of 3704 plant extracts against JH III-mediated Met-SRC binding. Plant extracts from conifers, especially members of the Pinaceae, exhibited strong interfering activity, and four active interfering DRAs (7α-dehydroabietic acid, 7-oxodehydroabietic acid, dehydroabietic acid, and sandaracopimaric acid) were isolated from roots of the Japanese pine Pinus densiflora. The four isolated DRAs, along with abietic acid, disrupted the juvenile hormone-mediated binding of P. interpunctella Met and SRC, although only 7-oxodehydroabietic acid disrupted larval development. These results demonstrate that DRAs may play a defensive role against herbivorous insects via insect endocrine-disrupting activity.     

Minimizing loss in LCD glass manufacturing by cutting pattern optimization based on integer programming

Loss reduction plays a critical role in improving both process efficiency and overall profitability. As processes become more complex, loss reduction becomes more challenging and systematic decision-supporting methods are thus needed. This paper illustrates such a method in the context of liquid crystal display (LCD) glass production, which involves a series of chemical processes. Loss-minimizing integer programming models are proposed to compute a cutting pattern that allocates multiple demands to LCD mother glass. Numerical examples from actual LCD glass processes are presented to illustrate the applicability of the proposed method.