Lipid production in Porphyridium cruentum grown under different culture conditions

Autotrophic growth of Porphyridium cruentum under 18:12 h and 12:12 h light:dark cycles showed the maximum cell concentration of 2.1 g-dry wt./L, whereas the specific growth rate, 0.042 (1/h), at 18:6 h is faster than that of 12:12 h, 0.031 (1/h), respectively. The highest lipid accumulation level, 19.3 (%, w/w), was achieved at 12:12 h cycle. Under dark cultivation condition with 10 g/L of glucose, the lipid accumulation in the cell was 10.9 (%, w/w), whereas the heterotrophic growth with glycerol as the carbon resource showed low level of cell concentration and lipid production, compared to that of glucose. The glucose was decided to be a suitable carbon resource for the heterotrophic growth of P. cruentum. The lipids from P. cruentum seemed be feasible for biodiesel production, because over 30% of the lipid was C₁₆–C_18:1. The cultivation time and temperature were important factors to increase the maximum cell concentration. Extending the cultivation time helps maintain the maximum cell concentration, and higher lipid accumulation was achieved at 25 °C, compared to 35 °C. The fed-batch cultures showed that, under the light condition, the specific production rate was slightly decreased to 0.4% lipid/g-dry wt./day at the later stage, whereas, under the dark condition, the specific production rate was maintained to be a maximum value of 1.1% lipid/g-dry wt./day, even in the later stage of cultivation. The results indicate that the heterotrophic or 12:12 h cyclic mixotrophic growth of P. cruentum could be used for the production of biodiesel in long-term fed-batch cultivation of P. cruentum.     

Next‐Generation Sequencing Analyses of Bacterial Community Structures in Soybean Pastes Produced in Northeast China

Fermented soybean foods contain nutritional components including easily digestible peptides, cholesterol‐free oils, minerals, and vitamins. Various fermented soybean foods have been developed and are consumed as flavoring condiments in Asian regions. While the quality of fermented soybean foods is largely affected by microorganisms that participate in the fermentation process, our knowledge about the microorganisms in soybean pastes manufactured in Northeast China is limited. The current study used a culture‐independent barcoded pyrosequencing method targeting hypervariable V1/V2 regions of the 16S rRNA gene to evaluate Korean doenjang and soybean pastes prepared by the Hun Chinese (SPHC) and Korean minority (SPKM) populations in Northeast China. In total, 63399 high‐quality sequences were derived from 16 soybean paste samples collected in Northeast China. Each bacterial species‐level taxon of SPHC, SPKM, and Korean doenjang was clustered separately. Each paste contained representative bacterial species that could be distinguished from each other: Bacillus subtilis in SPKM, Tetragenococcus halophilus in SPHC, and Enterococcus durans in Korean doenjang. This is the 1st massive sequencing‐based study analyzing microbial communities in soybean pastes manufactured in Northeast China, compared to Korean doenjang. Our results clearly showed that each soybean paste contained unique microbial communities that varied depending on the manufacturing process and location.     

Sustainable Oxidative Cleavage of Vegetable Oils into Diacids by Organo-Modified Molybdenum Oxide Heterogeneous Catalysts

Exploiting vegetable oils to produce industrially valuable diacids via an eco‐friendly process requires an efficient and recyclable catalyst. In this work, a novel catalytic system based on organo‐modified molybdenum trioxide was synthesized by a green hydrothermal method in one simple step, using Mo powder as precursor, hydrogen peroxide, and amphiphilic surfactants cetyltrimethylammonium bromide (CTAB) and tetramethylammonium bromide (TMAB) as capping agents. The synthesized materials were first characterized by different techniques including XRD, SEM, TGA, and FT‐IR. Interestingly, various morphologies were obtained depending on the nature of the surfactants and synthetic conditions. The synthesized catalysts were employed in oxidative cleavage of oleic acid, the most abundant unsaturated fatty acid, to produce azelaic and pelargonic acids with a benign oxidant, H₂O₂. Excellent catalytic activities resulting in full conversion of initial oleic acid were obtained, particularly for CTAB‐capped molybdenum oxide (CTAB/Mo molar ratio of 1:3) that gave 83 and 68% yields of production of azelaic and pelargonic acids, respectively. These are the highest yields that have been obtained for this reaction by heterogeneous catalysts up to now. Moreover, the CTAB‐capped catalyst could be conveniently separated from the reaction mixture by simple centrifugation and reused without significant loss of activity up to at least four cycles.     

Development of a bioprocess combined with membrane technology for the treatment and recycling of textile effluent

A mixed culture of dye-decolorising Pseudomonas spp. was immobilised on polyurethane foam, and used in a bench-scale continuous culture bioreactor to treat textile effluent for colour removal. The provision of soluble wheat starch (0.2% w/v) to the culture medium promoted growth of biomass and enhanced decolorisation of effluent in the bioreactor. The bioprocess was further combined with membrane filtration technology to improve the quality of treated effluent. The treated effluent showed 90, 82 and 60% reduction in COD, BOD₅ and toxicity levels, respectively, and had potential for re-use in dyeing processes. The colour difference of the cotton fabrics dyed using the treated effluent samples compared to those dyed using normal supply water was found to be industrially acceptable. The described process could improve treatment efficiency and allow water recycling within the textile factory.     

Comparison of Two Preparation Methods in the Redox Properties of Pd/CeO<Subscript>2</Subscript>/Ta/Si Model Catalysts: Spin Coating Versus Sputter Deposition

Pd/CeO₂/Ta/Si model catalysts were prepared by spin coating and sputter deposition method, and characterized by means of AFM, SEM and in situ XPS, especially focusing on the redox properties of Ce and Pd elements. Compared with thin CeO₂ films (about 2.2nm), the thicker ones (about 22nm) maintained Ce⁴⁺ oxidation state even after treatment with H₂ up to 500°C while the presence of Pd facilitated the reduction of ceria. The reduction of ceria brought about following that of PdO, which was explained by the spillover of hydride in Pd to CeO₂ originating from hydrogen adsorption on the Pd surface. Compared with the sputter deposition method, spin coating produced the smaller size of Pd particles, thus leading to formation of the stable PdO species against hydrogen. Based on these results, a schematic model of Pd/CeO₂/Ta/Si was suggested and it might be assumed that spin coating method provided with an environment similar to the conventional impregnation.     

The influence of n-butanol/diesel fuel blends utilization on a small diesel engine performance and emissions

Nitrogen oxides and smoke emissions are the most significant emissions for the diesel engines. Especially, fuels containing high-level oxygen content can have potential to reduce smoke emissions significantly. The aim of the present study is to evaluate the influence of n-butanol/diesel fuel blends (as an oxygenation additive for the diesel fuel) on engine performance and exhaust emissions in a small diesel engine. For this aim five-test fuels, B5 (contains 5% n-butanol and 95% diesel fuel in volume basis), B10, B15, B20 and neat diesel fuel, were prepared to test in a diesel engine. Tests were performed in a single cylinder, four stroke, unmodified, and naturally aspirated DI high speed diesel engine at constant engine speed (2600 rpm) and four different engine loads by using five-test fuels. The experimental test results showed that smoke opacity, nitrogen oxides, and carbon monoxide emissions reduced while hydrocarbon emissions increased with the increasing n-butanol content in the fuel blends. In addition, there is an increase in the brake specific fuel consumption and in the brake thermal efficiency with increasing n-butanol content in fuel blends. Also, exhaust gas temperature decreased with increasing n-butanol content in the fuel blends.     

A methodology for determining the true stress-strain curve of SA-508 low alloy steel from a tensile test with finite element analysis

The true stress-strain curve of a material should be determined for plastic property input to numerical analysis. This study proposes a simple methodology for determining the true stress-strain curve of SA-508 Grade 3 Class 1 low alloy steel using limited information from a general tensile test with finite element analysis. Measured engineering stresses and strains can be reasonably converted to true stresses and strains under uniform deformation before necking. True stress-strains are difficult to determine after necking because of nonuniform deformation without specialized measurement techniques. Five post-necking strain hardening models are considered, namely, linear, swift, Ludwick, Hollomon-linear (HL) and Hollomon-linear-constant (HLC) models. The equations for each model can be determined using the results of the tensile test, which include the true stress-strain value at the maximum load point and the corrected true stress-strain value at the fracture point plus the Considere instability criterion. The HL and HLC models suggested that the engineering stress-strains from the finite element analysis are consistent with the experimental results.     

下荆江熊家洲至城陵矶弯曲型河段河床调整规律

三峡水库运用后, 坝下游水沙过程发生了较大调整, 对下荆江熊家洲至城陵矶弯曲型河段河床冲淤演变造成较大影响, 从而对本河段河势稳定、防洪、航运等可能造成不利的影响, 基于此, 根据最新实测资料分析水沙条件变 化及其对本河段河床调整规律的影响。研究成果显示: 三峡水库运用后, 水流含沙量大幅减小, 且水库调蓄导致熊 家洲至城陵矶河段在枯水期径流量明显增加, 使弯道主流长期偏向于凸岸, 引起凸岸边滩大幅冲刷, 这是近期该河段发生“撇弯切滩”的主要原因之一; 随着三峡上游干支流水库群陆续建成运用, 坝下游河道将会长期遭受清水冲 刷, 河床仍将呈单向冲刷下切的趋势, 弯顶段主流平面摆动仍将较大, 弯道顶冲点也将相应下移, 导致主流贴岸距离 进一步下延, 引起河道岸线的崩退, 未来一段时期内典型弯曲型河道的局部河势变化仍将明显。     

Substance P,A Promising Therapeutic Target in Musculoskeletal Disorders

A large number of studies have focused on the role of substance P (SP) and the neurokinin-1 receptor (NK1R) in the pathogenesis of a variety of medical conditions. This review provides an overview of the role of the SP-NK1R pathway in the pathogenesis of musculoskeletal disorders and the evidence for its role as a therapeutic target for these disorders, which are major public health problems in most countries. To summarize, the brief involvement of SP may affect tendon healing in an acute injury setting. SP combined with an adequate conjugate can be a regenerative therapeutic option in osteoarthritis. The NK1R antagonist is a promising agent for tendinopathy, rheumatoid arthritis, and osteoarthritis. Research on the SP-NK1R pathway will be helpful for developing novel drugs for osteoporosis.