GaN and AlGaN high-voltage rectifiers grown by metal-organic chemical-vapor deposition

In this paper, we report the study of the electrical characteristics of GaN and AlGaN vertical p-i-n junctions and Schottky rectifiers grown on both sapphire and SiC substrates by metal-organic chemical-vapor deposition. For GaN p-i-n rectifiers grown on SiC with a relatively thin “i” region of 2 μm, a breakdown voltage over 400 V, and forward voltage as low as 4.5 V at 100 A/cm² are exhibited for a 60-μm-diameter device. A GaN Schottky diode with a 2-μm-thick undoped layer exhibits a blocking voltage in excess of ∼230 V at a reverse-leakage current density below 1 mA/cm², and a forward-voltage drop of 3.5 V at a current density of 100 A/cm². It has been found that with the same device structure and process approach, the leakage current of a device grown on a SiC substrate is much lower than a device grown on a sapphire substrate. The use of Mg ion implantation for p-guard rings as planar-edge terminations in mesageometry GaN Schottky rectifiers has also been studied.     

An easy-to-use mismatch model for the MOS transistor

In this paper, a physics-based mismatch model is presented. It is demonstrated on a 0.18-/spl mu/m technology that a simple mismatch model can still be used to characterize deep-submicron technologies. The accuracy of the model is examined and found to be within 20% in the strong inversion region. Bulk bias dependence is modeled in a physical way. To extract the mismatch parameters, a weighted fit is introduced. It is shown that the width and length dependence of the mismatch parameters is given by the Pelgrom model.     

Characterization of residual information for SeaWinds quality control

Recent work has shown the important properties of the wind inversion residual or maximum-likelihood estimator (MLE) for quality Control (QC) of QuikSCAT Hierarchical Data Format (HDF) observations. Since March 2000, the QuikSCAT near-real-time (NRT) Binary Universal Format Representation (BUFR) product is available. As this product is used for numerical weather prediction (NWP) assimilation purposes, a QC procedure for the BUFR product is needed. We study the behavior of the MLE in order to determine whether the HDF QC procedure is appropriate for BUFR data. A comparison using real HDF and BUFR data reveals that the MLE distributions of HDF and BUFR differ and are actually poorly correlated. One important difference between BUFR and HDF is the amount of signal averaging prior to wind inversion. The averaging reduces the number of observations used in the wind retrieval for the BUFR product as compared to HDF. We show with a simple example that different MLE distributions are indeed expected due to this averaging. We also run a simulation in order to link theory and reality and better understand the behavior of the MLE. Despite the different MLE behavior in BUFR and HDF, the quality of the retrieved winds, as compared with the European Centre for Medium-Range Weather Forecasts winds, is very similar. We develop an MLE-based QC procedure for BUFR, similarly to the one in HDF, and we compare both. The skill of the QC in BUFR is again very similar to the one in HDF, showing that despite the different MLE behavior in both formats, the properties of the MLE as a QC indicator remain very similar.     

High-frequency small signal AC and noise modeling of MOSFETs for RFIC design

High-frequency (HF) AC and noise modeling of MOSFETs for radio frequency (RF) integrated circuit (IC) design is discussed. A subcircuit RF model incorporating the HF effects of parasitics is presented. This model is compared with the measured data for both y parameter and f_T characteristics. Good model accuracy is achieved against measurements for a 0.25 μm RF CMOS technology. The HF noise predictivity of the model is also examined with measured data. Furthermore, a methodology to extract the channel thermal noise of MOSFETs from HF noise measurements is presented. By using the extracted channel thermal noise, any thermal noise models can be verified directly. Several noise models including the RF model discussed in this paper have been examined, and the results show that the RF model can predict the channel thermal noise better than the other models     

Fabrication of 1.55 μm VCSELs on Si using metallic bonding

Using AuGeNiCr multilayered metals as the wafer bonding medium, long-wavelength GaInAsP/InP vertical cavity surface emitting lasers employing Al-oxide/Si as the upper and lower distributed Bragg reflectors were fabricated on Si substrate with the bonding interface formed outside the vertical cavity surface emitting laser cavity. Laser emission at 1.545 μm was measured under pulsed operations near room temperature. The low-temperature metallic bonding process demonstrates a great potential in device fabrication     

Retrievals of column water vapor using millimeter-wave radiometric measurements

The airborne Millimeter-wave Imaging Radiometer (MIR) measurements conducted over the Midwest region of the continental United States during January/February 1997 and over the Alaska-Arctic region during May 1998 are used to estimate column water vapor W<0.8 g/cm/sup 2/ under a clear sky. On board the same aircraft are two other instruments, the Cloud Lidar System (CLS) and MODerate-resolution Imaging Spectrometer (MODIS) Airborne Simulator (MAS), which provide cloud cover information and independent measurements of W, respectively. The MIR-estimated W values are compared and found to be in very good agreement with those measured by rawinsondes at near concurrence. A close correlation is found between the MIR-estimated W and that estimated from the MAS near-IR reflectance ratios. Water surface emissivities at several MIR frequencies are obtained in the process of the W retrieval from several flights over the Midwest lakes. These estimated emissivities compared favorably with values calculated for a calm water surface, which are based on a di-electric permittivity model and MAS-measured surface temperatures. The results from all comparisons strongly demonstrate the soundness of the technique for estimating W.     

Electromigration-induced damage in bamboo Al interconnects

Depletion and hillock formation were examined in-situ in a scanning electron microscope (SEM) during electromigration of bamboo Al interconnect segments. Hillocks formed directly at the anode ends of the segments by epitaxial addition of Al at the bottom Al/TiN interface. Depletion occurred nonuniformly from the cathode end and stopped once the distance between the leading void and the hillock reached the critical length for electromigration at the given current density. A modified equation for the drift velocity is proposed, which includes the effect of nonuniform depletion and predicts that interconnects with nonuniform depletion are more reliable than those with uniform depletion.     

Live animal performance, carcass traits, and meat palatability of calf- and yearling-fed cloned steers

Two groups of Brangus steers produced by nuclear transplantation cloning were used in parallel studies investigating the impact of calf- and yearling-feeding. The first group (n = 8) were fed as calves (CF; n = 4) or yearlings (YF; n = 4) to a constant age end point of 16 mo. The second group (n = 10) were fed as calves (CF; n = 5) or yearlings (YF; n = 5) to a constant live weight end point (530 kg). When slaughtered at the same age, CF and YF steers did not differ (P > .05) in feedlot ADG, but the CF steers were heavier and had higher dressing percentages, numeric yield grades, and quality grades (P < .05). Top loin steaks from the groups of steers did not differ (P > .05) in palatability traits. When fed to a constant live weight, the YF steers gained more rapidly (P < .05) and had lower (P < .05) numeric yield grades than did CF steers. Again CF steers had higher (P < .05) dressing percentages. There was no difference (P > .05) between the treatments in carcass quality grade or meat palatability characteristics. Thus, when finished to a constant weight end point, YF steers gained more rapidly, with no adverse effects on carcass quality grade or palatability traits; however, CF steers consistently produced higher dressing percentages, largely due to greater external fatness.     

Prevalence of adrenal carcinoma among incidentally discovered adrenal masses. A retrospective study from 1989 to 1994. Gruppo Piemontese Incidentalomi Surrenalici

BACKGROUND: The incidental discovery of an adrenal mass poses the problem of distinguishing between the frequent benign masses and the infrequent malignant ones that require surgery. Univocal guidelines to approach this problem are unavailable. OBJECTIVE: To perform a survey of the clinical management of incidentally discovered adrenal masses (ie, adrenal incidentalomas). DESIGN: A multicentric retrospective analysis of hospital medical records of adrenal incidentalomas diagnosed during a 5-year period; the medical records were scrutinized for demographic data and clinical details by means of a specifically tailored questionnaire. SETTING: The major surgical and medical centers of Piedmont, a northern Italian region with approximately 4 million inhabitants. The recruitment pattern of these centers was unselected. PATIENTS: The definition of adrenal incidentaloma was limited to patients with a physical examination and a clinical history unindicative of adrenal disease. Exclusion criteria also included hypertension of suspected endocrine origin and a history of neoplasms known to metastasize frequently in the adrenal glands. Two hundred twenty-four medical records were collected, and 210 were analyzed (14 excluded a posteriori). RESULTS: Most patients were in their 50s and 60s, and women were predominantly affected. The frequency of adrenocortical cancer was 13% among patients operated on. The tumor diameter was highly correlated with the risk of cancer; a cutoff at 5 cm had a sensitivity of 93% with a specificity of 64% in discriminating between benign and malignant cortical lesions. CONCLUSIONS: The occurrence of adrenocortical carcinoma among adrenal incidentalomas is not rare. The evaluation of the mass size is a simple and effective method for selecting patients at risk for cancer. The indication for surgery of masses larger than 5 cm, or of masses of any diameter that have suspicious imaging characteristics, limits unnecessary operations and costs.