Religiosity and emotional disturbance: A test of Ellis's thesis in his own counseling center.

Assessed the validity of A. Ellis's (1971, 1973, 1981) contention that being religious was negatively correlated with mental health. 28 very religious, 34 atheist, and 33 religiously-neutral individuals seeking consultation were compared on the frequency and number of 8 reported problems. Contrary to Ellis's prediction, there were no significant differences among the groups. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

ESD phenomena in GMR heads in the manufacturing process of HDD and GMR heads

It is well known that giant magnetoresistive (GMR) heads used for hard disk drives (HDD) are very sensitive to electrostatic discharge (ESD). In this paper, we describe a method of categorizing ESD damage modes from a standpoint of magnetic influences on the heads as observed by quasi-static test (QST) characteristics as well as electromagnetic characteristics like off-track profiles. In addition, we report an example of GMR stack interlayer diffusion which is one type of hard ESD damage. We also present an example of ESD damage that happened in an actual production process and its preventive measures as guidelines.     

Application of Romero García method to the degradation process of DGEBA/ETDA filled with ultra fine metallic copper

Summary The thermal properties of an epoxy resin (diglycidyl ether Bisphenol A, DGEBA) cured with a primary amine (ethylenediamine, ETDA) and filled with 10, 20 and 30 wt. % of ultra fine copper particles were analyzed. The thermal results were evaluated by means of the Romero-Garcia method, which allowed to obtain the resin degradation kinetic parameters, as well as the possible decomposition mechanism. From the obtained results is possible to infer that higger copper content strongly affects the degradation process of the epoxy resin, which causes a drop off on the composites thermal stability. This behavior could be attributed to water presence, being this effect less pronounced for the resin with 10 wt. % copper and unfilled resin. Regarding to decomposition mechanism, three way transport showed the best correlation for all samples.     

Influence of nitrate, ascorbic acid, and nitrate reductase microorganisms on N-nitrosamine formation during Korean-style soysauce fermentation.

Traditional Korean soysauce samples were collected from households in Chinju, Gyeongnam, Korea and analysed for volatile N-nitrosamines. Five of 24 samples contained NDMA (range = 1.6-10.4 micrograms/l) which was the only volatile N-nitroso compound found. Soysauce made from well water contained NDMA more often (4 of 6 samples) than soysauce made from tap water (1 of 18). This suggests that the water source is a determinate in the NDMA content of soysauce, probably due to a higher nitrate content of well water. The source of salt used did not clearly influence NDMA content. Soysauce was prepared in the laboratory using traditional methods but with 0 to 400 mg/l nitrate and in some cases made 6.5 to 65 mM in ascorbic acid and fermented for 120 days. The NDMA content of the samples was positively correlated with increasing nitrate concentration. Nitrate at 400 mg/l resulted in an NDMA content of 203 micrograms/l. Ascorbic acid substantially inhibited NDMA formation. All samples contained large numbers of nitrate reductase-containing organisms (greater than 1 x 10(7) CFU/ml).     

Extremum-seeking with variable gain control for intensifying biogas production in anaerobic fermentation.

A state-dependent variable-gain control system is implemented to follow the characteristics of a laboratory-scale up-flow anaerobic fixed-bed reactor dynamically. The transition from one state to another is determined on an hourly basis, depending on difference between the setpoint of the reactor pH and its true value. Considerable improvement of the process stability--reduction of oscillation in both the reactor pH and biogas production rate during high-rate operation, has been achieved, although the control structure is simple and intuitive.     

Changing the hydrogen content of alloy steel in relation to the technology used to cool cast slabs

Results are reported from the production of two trial heats of alloy steel in which the cast slabs were cooled in a thermostatted chamber and in a dense stack. It is shown that cooling slabs in such a chamber makes it possible to reduce the hydrogen content of the steel 30% compared to slabs that are cooled while stacked.     

A contribution to the theory of parametric excitation of thermomechanical oscillations

The conditions for a rather fast increase in parametric thermomechanical oscillations have been revealed by using numerical solutions of some types of Hill's equation. It is shown that the occurrence of a real parametric resonance is essentially determined by the character of thermal modulations. It is hypothesized that the indicated trends are observed in oscillations of any physical nature.Stavropol State Pedagogical Institute, Stavropol. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 63, No. 3, pp. 294–298, September, 1992.     

Precision winding of fiber optic filament. II. Winding control

For pt.I see ibid., vol.39, no.3, p.258-67 (1992). The winding of fiber optic filament in the hoop, or precision, pattern is considered. Various automatic control options that have been designed and tested are described. The controllers are designed to regulate the fiber lag angle, which is the angle at which the feed filament approaches the take-up spool. Successful, flawless winding is directly related to accurate lag regulation. The contributions are distinguished by the fact that the automatic winding rate is 10 to 30 times greater than that achieved before by operator-assisted winding