中国观赏石文化与收藏

以推动人类文明进步发展的观念为先导,以详实的地质学、岩石学、石文化史料为切入点,介绍了我国观赏石文化的起源、发展及现状;阐述了赏石审美的本质、形式、石体标准、传统性、现代性等理论要点及其以小见大、以丑为美的审美理念。对赏石修身养性、以石陶情及赏石文化与道教情结的学术价值进行了评述;对从古至今的中华文化名人为赏石理论的创立、鉴赏、收藏和发展作出的不可磨灭的历史贡献进行了评价。     

夹层式结构在金刚石钻头上的应用

采用冷压成型夹层和加灰(过渡层)热压烧结法制备了一种夹层结构金刚石钻头.经与普通金刚石钻头进行对比试验发现,夹层结构钻头速度和使用寿命比普通钻头有了明显的提高,其原因是由于钻头工作时岩脊的体积破碎作用.这样初步找到了一种既能提高金刚石钻头钻进速度,又能增加金刚石钻头寿命的制造方法.     

工艺参数对PP挤出发泡泡孔结构的影响

研究了螺杆转速、机头口模形状以及机头温度对挤出发泡聚丙烯(PP)泡孔结构的影响。结果表明：在挤出发泡过程中，一定配方、机头形状和温度下，螺杆转速存在最佳值；机头形状越有利于建立高压，制得的泡沫的泡孔越细密均匀且发泡倍率越高；机头口模温度在保证顺利挤出情况下．越低越有利于制得高发泡倍率的泡沫。     

如何提高预焙铝电解槽阳极质量

预焙阳极的质量已严重制约铝电解技术的发展，必须予以足够的重视．国外在提高阳极质量方面的有效措施，可以供国内阳极工厂技术改造及科研攻关借鉴．     

氯化聚丙烯改性胶粘剂的合成及粘附性能研究

以甲苯为溶剂，过氧化二苯甲酰(BP0)为引发剂，通过自由基聚合，采用甲基丙烯酸羟乙酯(HEMA)和苯乙烯(St)接枝改性氯化聚丙烯(CPP)。研究了不同苯乙烯用量、不同反应温度、不同反应时间、不同引发剂用量对改性氯化聚丙烯胶粘剂粘附性能的影响，得出较佳的工艺条件为反应温度90℃，反应时问2h，原料配比m(CPP)：m(HEMA)：m(St)：m(BPO)=50：0．5：0．6：0．15。     

Poly(3‐chlorothiophene) films prepared by the direct electrochemical oxidation of 3‐chlorothiophene in mixed electrolytes of boron trifluoride diethyl etherate and sulfuric acid

3‐Chlorothiophene (CT) was electrochemically polymerized in mixed electrolytes of a boron trifluoride diethyl etherate solution containing 0–20% (by volume) sulfuric acid. The oxidation potentials of the monomer in these media were measured to be only 1.06–1.31 V (vs Ag/AgCl). These values were much lower than that of CT in acetonitrile and 0.1 mol/L (Bu)₄NBF₄ (1.92 V vs Ag/AgCl). Poly(3‐chlorothiophene) (PCT) films with conductivities of 0.1–2 S cm^?1 were obtained. The structure, morphology, and electrochemical behavior of the PCT films also were investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 502–509, 2003     

Strain-induced crystallization,Part IV: Induction time analysis

The empirical equation, 1/t_i = Ae^Ei/RT, which expresses the exponential dependence of the reciprocal of crystallization induction time, t_i, has been analyzed and shown to be equivalent to the nucleation rate equations derived earlier in Part III (1). Consequently we have used the t_i measurements obtained earlier by Krueger and Yeh to calculate not only the nucleation rate enhancements but also the melting point elevations, the relative crystal thickness changes and molecular coil extension ratios of shear-crystallization polyethylene. It is shown that polyethylene when crystallized between 129 and 131°C at shear rates between 1.56 and 9.70 sec^?1 can have melting point increases of 4.2 to 7.2°C and crystal thickness decreases of 20 to 25 percent, when compared to those crystallized at 130°C in the quiescent state. The predicted “coil” extension in the melt just prior to shear-induced crystallization ranges between 21 and 36 percent. The results of these analyses as well as those on nucleation rates of polyethylene oxide are discussed in detail.     

可降解聚丙烯发泡塑料初探

开发可降解聚丙烯(PP)发泡制品具有广阔的发展前景。PP自身的化学结构特点使其具有比其它聚烯烃和PS更优异的降解性能。在PP中添加各种光降解剂,或引入光敏基团可以促进PP的光降解性;将其与天然高分子或各种可降解塑料混合也可以有效促进PP的生物降解;将降解和发泡的配方和工艺合理结合以获得光降解性、生物降解性或光 生物双降解的发泡PP制品是完全可能的。     

环氧丙烷生产工艺进展

综述了近年来环氧丙烷合成工艺的新进展,包括对现有环氧丙烷生产工艺的革新、直接氧化法、光催化环氧化等方法,并对各种方法的特点和发展前景进行了讨论.