Effect of temperature on polymer migration II: Concentration equation

Polymer migration is a generally well-known phenomenon in a flow field, and it has been verified that the sources of such phenomena are nonhomogeneity of the flow, concentration effects and hydrodynamic interactions between the polymer molecules. In addition, temperature effects were found to be another source of polymer migration. The Langevin equation for a polymer molecule was first derived from single chain dynamics using a kinetic theory for the bead-spring elastic harmonic dumbbell model, as described in part I (reference [1]). In this paper the diffusion equation and concentration profile of the polymer molecules induced by a temperature gradient are obtained from the Fokker-Planck equation. A new differential operator is also introduced to calculate the concentration profile. From the concentration equation obtained in the general flow geometry, we find that in dilute polymer solution there are significant effects on the polymer migration not only due to the nonhomogeneity of the flow field but also due to temperature gradients.     

Dependence of properties of liquid crystalline aromatic copolyesters on monomer sequence-copolyesters derived from terephthalic acid, 2,7-naphthalenediol and p-hydroxybenzoic acid

Summary An aromatic copolyester with the ordered sequence of terephthalic acid (TA)-p-hydroxybenzoic acid (HB)-2,7-naphthalenediol (ND)-p-hydroxybenzoic acid (HB) was prepared and its properties were compared with those of the corresponding random copolyester having the same overall monomer composition. Thermal and crystallizing properties of the two polymers are quite different. The former exhibits significantly higher glass transition and melting temperatures than the latter. The former's degree of crystallinity also is much higher than the latter's. Both polymers are thermotropic and form nematic melts.     

半刚性钢-混凝土组合节点受弯承载力的计算

在半刚性钢 -混凝土组合框架中 ,混凝土板中的纵向钢筋增加了节点的强度和刚度 ,但是 ,传统的设计方法往往忽略纵向钢筋的作用而采用简化的计算模型。因此 ,出于经济效益考虑 ,应该根据半刚性组合节点的实际受力性能建立更加准确的计算方法。这里详细介绍了考虑混凝土板纵向钢筋作用的半刚性组合节点受弯承载力的计算方法 ,计算结果表明 ,建议的公式与试验结果吻合良好 ,可供规范制定和工程应用参考。     

高柔韧性聚氨酯丙烯酸酯的合成及应用

选用不同结构的多元醇作骨架，合成一系列高性能的聚氨酯丙烯酸树脂，并通过对聚氨酯丙烯酸树脂性能的对比研究，发现以聚丁二烯二元醇为骨架的聚氨酯丙烯酸酯树脂具有极佳的柔韧性和优异的低温耐曲折性。     

模拟三相流化床中颗粒尺寸对单气泡传质系数的影响

本文在模拟三相流化床中,测量了单气泡的传质系数,实验结果表明颗粒直径对气-液传质系数影响显著。颗粒直径较大时,传质系数有明显提高。     

功能性建筑涂料照亮市场

功能性建筑涂料除了具备普通建筑涂料的装饰作用外，还能起到某种功能性作用。随着国民经济的快速发展，其应用也越来越普遍，可以预期，功能性建筑涂料的实用性，拓宽建筑涂料的应用范围。本文作者庚晋介绍了几种功能性建筑涂料的特点、主要用途、最新研究动态、施工方法、市场前景等。     

溴虫腈土壤和甘蓝微量残留量的气相色谱法测定

采用气相色谱法定量分析溴虫腈土壤和甘蓝微量残留量。样品经丙酮提取 ,液 液分配及氧化铝柱层析法净化后 ,以GC ECD测定 ,DB 170 1毛细管柱 ,氮气为载气 ,柱温 2 6 0℃ ,汽化室温度 2 5 0℃ ,检测器温度 2 80℃ ,外标法定量。该方法快速、准确 ,在 0 0 1～ 2 0 0mg/L范围内线性相关系数r2 =0 9999,平均回收率 90 0 %～ 10 3 6 7% ,变异系数 4 4 8%～ 5 89% ,最小检测量 2× 10 12 g ,最低检出浓度 3 3× 10 4mg/kg。     

Blends of chlorinated isotactic polypropylene with poly(ethylene-co-vinyl acetate) I. Effect of component polymers composition on the blend miscibility

Chlorinated isotactic polypropylenes (CPP) having various chlorine contents were blended with poly(ethylene-co-vinyl acetate)s (EVA) having various vinyl acetate (VA) contents. The blends were made by casting films from dilute THF solutions and miscibility of the blends was identified by single glass transition temperature, which was confirmed by DSC and dynamic mechanical measurements. Based on the miscibility data from a large number of CPP/EVA combinations, a miscibility map was depicted where CO equivalent weight (CO-EQW) of EVA was plotted against chlorine equivalent weight (Cl-EQW) of CPP. Though an attractive interaction between CPP and EVA could be detected in all the miscible and immiscible blend pairs, miscibility of the CPP/EVA blends could solely be observed in a relatively narrow range of Cl-EQW ca. 65–100 and CO-EQW ca. 170–230.     

Morphologies and microstructures of tree-like carbon produced at different reaction conditions in a CVD process

Centimeter-size multi-branched tree-like carbon structures have been generated by the catalytic chemical vapor deposition of toluene using ferrocene as the catalyst precursor and investigated by means of SEM, TEM, and EDX. It is found that a temperature of 1000-1200 °C and a carrier gas flow rate of 1000-2500 ml/min are necessary for the generation of the carbon trees. Their morphologies and microstructures change greatly with the changing reaction conditions. The fractal dimensions of the trees are calculated to quantitatively investigate the influence of different reaction temperatures on the morphologies.     

骨架材料对全钢载重子午线轮胎性能的影响

讨论骨架材料的规格、结构分布及工艺控制对全钢载重子午线轮胎性能的影响。胎体帘布采用带有外缠丝的 3 + 9+ 15× 0 2 2 + 0 15规格钢丝、胎体帘线密度在 45 0～ 65 0根·m- 1 范围内 (帘线直径大于 1 2mm)以及胎体反包端点在成品外轮廓曲线的第 2或 3条装配线上等措施均有利于保证胎体强度 ;合理设计带束层结构 ,端点与胎侧肩部花纹距离取 10mm左右有利于消除应力过度集中 ;采用钢丝增强带有利于提高胎圈刚性。