Synthesis and characterization of poly acrylic acid/graphite oxide nanocomposite

1　INTRODUCTIONOrganic intercalatedlayeredsolidshavebeenstudiedbyscientistsindifferentfieldsformanyyearsbecauseoftheirnew physicalandchemicalpropertiessuchaselectricalproperties[1] ,mechanicalproper ties ,thermalbehavior[2 ] ,surfaceandinterfacialproperties[3] .Graphiteoxide (GO)hasbeenstudiedformany years ,itsstructuralmodel[4 6 ] ,formationprocessandkinetics[7,8] havebeenstudiedindetail.IthasbeenreportedthatGOpossessesC OHande poxidefunctionalgroups[9] whichmakegraphiteox ideeasilyabs…     

5%Si高硅奥氏体不锈钢元素偏析及均匀化处理

 高硅奥氏体不锈钢由于高含量硅元素的加入使其具有优异的耐高温腐蚀性能和较低的成本,在制酸行业有着潜在的应用价值。然而,该合金中高含量硅元素的加入会促进凝固过程中溶质再分配,进而造成显著的元素偏析,最终导致合金内部产生枝晶组织和大量的有害相。对铸锭组织进行均匀化处理能够有效消除枝晶与元素偏析,促进析出相回溶和枝晶消融,从而改善材料的热塑性,有效应对热变形开裂问题。因此,采用金相显微镜(OM)、扫描电镜能谱分析(SEM/EDS)、电子探针(EPMA)、JMatPro软件计算等方法,研究了实验室条件下制备的5%Si高硅奥氏体不锈钢铸锭的显微组织和元素分布状态,通过残余偏析指数、扩散动力学计算并结合均匀化处理试验验证,最终确定了5%Si高硅奥氏体不锈钢合理的均匀化处理工艺。结果表明,5%Si高硅奥氏体不锈钢凝固过程中钼元素偏析最为严重,通过残余偏析指数模型计算得到的均匀化动力学方程可用来指导该成分合金的均匀化处理工艺;5%Si高硅奥氏体不锈钢经过1 150 ℃×12 h均匀化处理后,铸锭内枝晶消融,元素偏析基本消除,析出相与铁素体回溶到基体中,合金转变为全奥氏体组织,热塑性得到改善;当加热温度达到1 250 ℃时,合金出现过烧现象,晶界开始熔化。     

MnS夹杂物诱发钢材点蚀综述

MnS夹杂物诱发钢材点蚀,对钢材服役寿命、工作生产安全和社会经济发展产生巨大危害。首先,分析了MnS夹杂物诱发钢材点蚀的机理,包括电偶腐蚀机理、S和Cl-协同作用机理、封闭区域加速点蚀机理、贫铬区机理和微缝隙机理;其次,汇总了MnS夹杂物大小、形貌、分布,Cl-浓度、温度和应力对MnS夹杂物诱发钢材点蚀的影响;然后,总结了钢材防腐蚀的常用措施;最后,展望了防止MnS夹杂物诱发钢材点蚀的未来研究方向。     

纳米晶体Se的微观结构特征

本文采用Ｘ射线衍射和透射电子显微镜研究了纳米晶体Ｓｅ的微观结构特征．通过测定不同晶粒尺寸的纳米晶体Ｓｅ的点阵参数ａ和ｃ，发现纳米晶体Ｓｅ中存在晶格畸变，畸变量与晶粒尺寸有关．得到了纳米晶体Ｓｅ中晶胞体积变化与晶粒尺寸的关系．并由点阵参数计算出纳米晶体Ｓｅ的键长．用非晶态Ｓｅ中的无规链折叠的晶化机制解释了纳米晶体Ｓｅ中晶格畸变现象．     

单晶高温合金定向凝固过程中初生碳化物的上浮现象SCIEI

本文在一种抗热腐蚀单晶镍基高温合金平面及胞状液-固界面定向凝固条件下,发现了初生碳化物(TiC)的上浮现象并分析了其形成原因。     

应变速率对中碳低温贝氏体钢强塑性的影响

摘要：为探索低温贝氏体钢的断裂行为,研究应变速率对低温贝氏体钢TRIP效应的影响,采用不同应变速率的拉伸试验对低温贝氏体钢的强塑性进行研究。利用扫描电镜（SEM）、透射电镜（TEM）及X射线衍射（XRD）等试验方法对低温贝氏体钢的微观组织、断口形貌及裂纹走向进行表征。结果表明,随着应变速率的提高,试验钢的屈服强度由771MPa上升至806MPa,抗拉强度由1554MPa上升至1606MPa,断后伸长率由13.5%下降至9.0%。主要原因是高应变速率拉伸引发的绝热温升抑制了残余奥氏体的马氏体相变,对试验钢塑性造成负面影响。     

Progress in flotation de-silica

1　INTRODUCTIONBayer sprocessisatypicalmethodtoproducea luminumoxidefrombauxite .Forthediasporic baux ite ,theBayer sprocesscaneconomicallyproducealu minumoxideonlywhenthemassratioofAl2 O3toSiO2 >10 .However ,inChina ,thealuminumoxidewasmainlyproducedbyusing“sinteringprocess”or“in parallelBayer sinteringcombination process”technologiesbecausethediasporic bauxiteischarac terizedbyhighcontentofaluminumoxideandsilicabutlowAl2 O3/SiO2 (average 5 6 ) .Thesetwotech nologieshavetheproble…     

Fabrication of composite wire of lead coated on glass fiber by extrusion

1　INTRODUCTIONCoatingglassfiberwithleadproducesakindofnewcontinuouscomposite ,whichcanfindwideap plicationsinmanydifferentfields ,especiallyinthebatteryoftheEVsandHEVsthathasalreadybecomethemostimportantgoalinmostcountries[13] .Withakindofspecialtechnologythiskindofnewcompos itewirecanbeusedtoproducegridsofnewleadacidbatterythatisveryusefultotheEVsandHEVs .Thiskindofnewleadacidbatteryhasmanyadvan tages ,suchashigherspecificenergy ,lessinnerresis tance ,morequicklychargingcapabilityand…     

TEMPERED BAINITE EMBRITTLEMENT IN SOME STRUCTURAL STEELS

The variations of microstructures and mechanical properties of steels 15CrMnMoV,18Mn2CrMoB,18Cr2Ni4W,30CrMnSi,30CrMnSiNi2 and 40CrMnSiMoV,which weretempered at different temperatures after austempering and continuous cooling at given rates,have been investigated.Based on the experimental results,the behaviour and mechanism oftempered bainite embrittlement(TBE)have been discussed.Finally,the theoretical and prac-tical basis for selecting the optimum tempering temperature of steels with bainite structure af-ter heat treatment are proposed.     

BEHAVIOR OF Mg AND ITS EFFECT ON MECHANICAL PROPERTIES OF CAST Fe_3Al ALLOYS

Proper addition of 0.002 wt-% Mg to cast Fe_3Al alloy may obviously improve the room andhigh temperature tensile properties.Auger spectra show that Mg segregates near grainboundaries as very thin layers.Observation under TEM reveals that a suitable amount of Mgenhances ability of cooperative internal deformation so that the dislocations will ease the con-tinuous slip deformation through grain boundaries.The fracture feature of Fe_3Al alloy is oftransgranular cleavage at room temperature and cracks initiate at grain boundaries.