Drug release from heat-treated polyvinyl alcohol films

Polyvinyl alcohol (PVA) films containing 10% w/w of a model drug, sulphathiazole, were cast from aqueous solutions and subjected to heat treatment at specific temperatures for known periods of time. Heat treatment at temperatures above the T_g of the PVA films slowed down the rate of drug release from the films. Increasing the temperature of heat treatment from 120°C to 160°C further decreased the rate of drug release. On the other hand, if the heat treatment were conducted at a temperature below the T_g e.g. at 80°C, there were insignificant differences between the release profile of sulphathiazole from heat-treated films and that from untreated films. The duration of heat treatment affected the rate of drug release to a smaller extent compared to the temperature of heat treatment. These results correlated with the heat induced changes in the morphology of, and in the extent of water uptake by the PVA films.     

Physical fitness, physical activity, and functional limitation in adults aged 40 and older

PURPOSE: A cohort of middle-aged and older men and women were followed for an average of 5.5 yr to examine the association between physical fitness, physical activity, and the prevalence of functional limitation. METHODS: The participants received medical assessments between 1980 and 1988 and responded to a mail-back survey regarding functional status in 1990. RESULTS: Among 3495 men and 1175 women over 40 yr of age at baseline, 350 (7.5%) reported at least one functional limitation in daily or household activities at follow-up. The prevalence of functional limitation was higher among women than men. Physically fit and physically active participants reported less functional limitation than unfit or sedentary participants. After controlling for age and other risk factors, the prevalence of functional limitation was lower for both moderately fit (odds ratio = 0.4, 95% CI = 0.2-0.6) and high fit men (odds ratio = 0.3, 95% CI = 0.2-0.4), compared with low fit men. Corresponding figures for women were 0.5 (0.3-0.7) and 0.3 (0.2-0.5) for moderately fit and high fit women. The association between physical activity and functional limitation was similar to the data for physical fitness. CONCLUSIONS: These data support a protective effect of physical fitness and physical activity on functional limitation among older adults and extend this protective effect to middle-aged men and women.     

Disposition and elimination of meropenem in cerebrospinal fluid of hydrocephalic patients with external ventriculostomy

The broad antibacterial spectrum and the low incidence of seizures in meropenem-treated patients qualifies meropenem for therapy of bacterial meningitis. The present study evaluates concentrations in ventricular cerebrospinal fluid (CSF) in the absence of pronounced meningeal inflammation. Patients with occlusive hydrocephalus caused by cerebrovascular diseases, who had undergone external ventriculostomy (n = 10, age range 48 to 75 years), received 2 g of meropenem intravenously over 30 min. Serum and CSF were drawn repeatedly and analyzed by liquid chromatography-mass spectroscopy. Pharmacokinetics were determined by noncompartmental analysis. Maximum concentrations in serum were 84.7 +/- 23.7 microg/ml. A CSF maximum (CmaxCSF) of 0.63 +/- 0.50 microg/ml (mean +/- standard deviation) was observed 4.1 +/- 2.6 h after the end of the infusion. CmaxCSF and the area under the curve for CSF (AUCCSF) depended on the AUC for serum (AUCS), the CSF-to-serum albumin ratio, and the CSF leukocyte count. Elimination from CSF was considerably slower than from serum (half-life at beta phase [t1/2beta] of 7.36 +/- 2.89 h in CSF versus t1/2beta of 1.69 +/- 0.60 h in serum). The AUCCSF/AUCS ratio for meropenem, as a measure of overall CSF penetration, was 0.047 +/- 0.022. The AUCCSF/AUCS ratio for meropenem was similar to that for other beta-lactam antibiotics with a low binding to serum proteins. The concentration maxima of meropenem in ventricular CSF observed in this study are high enough to kill fully susceptible pathogens. They may not be sufficient to kill bacteria with a reduced sensitivity to carbapenems, although clinical success has been reported for patients with meningitis caused by penicillin-resistant pneumococci and Pseudomonas aeruginosa.     

A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds

A three-dimensional model is proposed for both furnace-side and wall-side heat transfer in circulating fluidized beds with membrane walls. Following previous publications (Int. J. Heat Mass Transfer (2003a, b)), a core-annulus flow structure is employed in the model, with consideration of the membrane wall influence on bed hydrodynamics. The model couples radiation, conduction and convection on the furnace side to conduction and convection on the wall side. Radiation in the wall layer is simulated by the moment method. A finite-element method is employed to solve the set of non-linear, partial differential equations. The solution is demonstrated for a typical example. The model gives predictions of suspension-to-wall heat transfer which show satisfactory agreement with published experimental data.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

An interactive lung field segmentation scheme with automated capability

Feasible clinical application of any automated segmenting methodology demands more than just accuracy. Amendment to the automated delineation is necessary when the algorithm fails, however, integrated solution to such a scenario is largely absent in literature. Hence in this survey we devised an architecture that does both the automated and interactive lung field localizations using a single segmenting engine—random walker algorithm—so that intuitive amendment is only necessary when the automated generated delineation is unsatisfactory. The algorithm proceeds by first extracting 18 intensity profiles running horizontally, each of them equally spacing apart, and in each intensity profile three extreme points denoting the two lungs and the esophagus are determined through profile matching. This done, the algorithm removes profiles that do not intersect with the lung, and the rest of the extreme points are plugged into random walker algorithm to perform segmentation. The achieved accuracy in localization by the above was 0.8875 in terms of overlap measure (the maximum value for this parameter is 1) over 341 images. In the case where unsatisfactory delineation prompts amendment necessary, the user can interactively segment the lung by just a shift on some of the previous-determined points to the desired locations, and random walker algorithm is run again with the amended input. By such a fusion, the benefits of both the automated and interactive segmentation are shared in a single architecture.     

Pitchfork bifurcation and flip-flop operation with a coupled nonlinear system

A ring cavity system consisting of two hybrid Michelson interferometers coupled together with feedback is constructed. This system shows spatial bifurcation and can be utilized as an all-optical flip-flop device. We demonstrate experimentally a flip-flop operation by use of only a positive pulse in this system.     

Metal Ions versus Protons: Tracking of Charge-Carrier Insertion into a Cathode Oxide in Aqueous Rechargeable Batteries

Protons in aqueous electrolytes can perform as an additional type of charge carrier for insertion/extraction in addition to the primary carrier cations in aqueous rechargeable batteries. Despite many diverse claims regarding the effect of protons, mutually conflicting experimental results and their interpretations without direct evidence have been reported over the last decade. Systematic examinations and analyses are thus imperative to clarify the conditions of proton insertion in aqueous rechargeable batteries. Utilizing V₂O₅ as a model cathode and beaker-type cells with a sufficient amount of ZnSO₄ aqueous electrolytes in this work, it is demonstrated that protons are inserted into the cathode prior to Zn-ions in low-pH conditions (pH ≤ 3.0). In stark contrast, the influence of protons on the discharge voltage and capacity is insignificant, when either the pH becomes higher (pH ≥ 4.0) or the electrolyte volume is considerably low in coin-type cells. Similar behavior of pH-dependent proton insertion is also verified in Na–, Mg–, and Al-ion electrolytes. Providing a resolution to the controversy regarding proton insertion, the present study emphasizes that the influence of protons substantially varies depending on the pH and relative volume of electrolytes in aqueous batteries.