Three-dimensional modelling of Non-Newtonian fluid flow in a coat-hanger die

The three-dimensional model of isothermal flow of power-law fluid in a coat-hanger die has been developed using finite element method. The shape of coat-hanger die used in the present model was determined according to the previous analytical design equation which is based on one-dimensional flow model in the manifold and the slot. Because uniform flow rate across the die outlet is most important to achieve uniform thickness of extruded polymer sheet or film, flow rate distribution is mainly examined to determine the valid process condition for the design equation as the design parameters are changed. The effects of fluid property in terms of power-law index and process parameters not considered in one-dimensional design equation such as die inlet size and the presence of land were analyzed. Results show that the manifold angle is the most influencing design parameter on flow rate distribution. When the material of different power-law index from design value is processed, the change of power-law index affects the uniformity of flow rate appreciably.     

Preparation of Monodisperse ZrO2 by the Microwave Heating of Zirconyl Chloride Solutions

Based on the principle that the solubility of a salt decreases as the dielectric constant of the solvent decreases, zirconia powders were prepared by heating a zirconyl chloride solution with a 2-PrOH-water mixture as the solvent. The morphology, size, and size distribution of the resulting particles were highly sensitive to the heating method used on the starting solution. Particles formed under conventional heating methods were polydisperse, agglomerated spherical, or irregularly shaped because of inhomogeneous precipitation through the temperature gradient, the shear force induced by stirring, compositional nonuniformity, and the low heating rate. The present study demonstrated that microwaves provide an excellent means of heating uniformly and rapidly without stirring. The particles resulting from microwave treatment were monodisperse and spherical, with a mean diameter of 0.28 μm.     

Kinetics of cellobiose decomposition under subcritical and supercritical water in continuous flow system

The effects of reaction temperature, pressure and residence time were investigated with a flow apparatus. Cellobiose decomposition kinetics and products in suband supercritical water were examined at temperatures from 320 to 420 °C at pressures from 25 to 40 MPa, and at residence times within 3 sec. Cellobiose was found to decompose via hydrolysis and pyrolysis. The yield of desired hydrolysis product, glucose, was the maximum value of 36.8% at 320 °C, 35 MPa, but the amount of 5-(hydroxymethyl)furfural (HMF), fermentation inhibitor increased too because residence time increased in the subcritical region owing to decrease of reaction rate. Meanwhile, though the yield of glucose is low in the supercritical region, the yield of HMF decreased compared with the subcritical region; and at the minimum yield of HMF (380 °C, 25 MPa), the yield of glucose was 21.4%. The decomposition of cellobiose followed first-order kinetics and the activation energy for the decomposition of cellobiose was 51.05 kJ/mol at 40MPa.     

Scalable Realistic Rendering with Many‐Light Methods

Recent years have seen increasing attention and significant progress in many‐light rendering, a class of methods for efficient computation of global illumination. The many‐light formulation offers a unified mathematical framework for the problem reducing the full lighting transport simulation to the calculation of the direct illumination from many virtual light sources. These methods are unrivaled in their scalability: they are able to produce plausible images in a fraction of a second but also converge to the full solution over time. In this state‐of‐the‐art report, we give an easy‐to‐follow, introductory tutorial of the many‐light theory; provide a comprehensive, unified survey of the topic with a comparison of the main algorithms; discuss limitations regarding materials and light transport phenomena and present a vision to motivate and guide future research. We will cover both the fundamental concepts as well as improvements, extensions and applications of many‐light rendering.     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003     

An analysis of muscles from ultrasound image using morphological information of fascia and thoracic vertebra

In this paper, we propose a new fully computerized image analysis method for measuring the thickness of muscles from ultrasound image obtained by muscle endurance test using morphological information of fascia and thoracic vertebra. Firstly, we divide the image into lumbar region and thoracolumbar region by the difference of density in image for measuring the thickness of muscles. In lumbar region, we notice that the intensity of fascia is relatively higher than other parts. Thus, we measure the thickness of muscles surrounding the fascia area. In the process, we apply median filter to candidate fascia areas for extracting candidate muscle layers between fascias. Then, the thickness of muscles we measure is that of the third layer. In thoracolumbar region, we apply region expansion method for classifying the region into subcutaneous fat part and part including thoracic vertebra. Then, we apply counting method and evolutionary computation search model to find the measuring location that is in between subcutaneous fat area and thoracic vertebra. In experiment, the proposed method is effective in measuring the thickness of muscles and avoids failures of previous studies. The performance of this approach is sufficiently comparable to that of medical experts.     

Binary blends of nylons with ethylene vinyl alcohol copolymers: Morphological,thermal, rheological,and mechanical behavior

Binary blends of ethylene vinyl alcohol copolymers, containing 62 (EVOH-62) and 71 (EVOH-71) mole percent vinyl alcohols, with nylons (nylon-6, nylon-6/12, and nylon-12) have been prepared from melt mixing in a twin screw compounding machine. Morphological, thermal, rheological, and mechanical properties were determined. EVOH-62/nylon-6 and EVOH-71/nylon-6 blends showed homogeneous phase morphologies in the nylon-6-rich region, and fine phase separations (c.a. 2 × 10^?7 m) in the EVOH-rich region. Melting point depression, positive deviations in viscosity and flexural modulus, and negative deviation in impact strength from the simple additive rule were generally observed. And the results were possibly interpreted in terms of compatibility and increased nylon/EVOH interactions over the nylon/nylon interactions. On the contrary, clean phase separations in large domains were observed from EVOH-71/nylon-6/12 and EVOH-71 /nylon-12 blends. Fibrillation was also obtained from EVOH rich blends. Probably due to the incompatible nature of these blends, yield at low rate of shear and a mechanical property drop were also observed.     

Synthesis and properties of acrylonitrile-CR-methyl methacrylate graft copolymer

Graft copolymerization of acrylonitrile (AN) and methyl methacrylate (MMA) onto polychloroprene (CR) was carried out using benzoyl peroxide as initiator. The effects of mole ratio of AN to MMA, reaction temperature, reaction time, solvent, and initiator concentration on the graft copolymerization were examined. It was found that the thermal stability and weatherability of the AN—CR—MMA graft copolymer (ACM) were considerably better than those of CR.     

Electrochemical behavior of Sn8Hg (gamma-2) and dental amalgam in a phosphate buffer solution

The gamma-2 phase (Sn₈Hg) and a dental amalgam in phosphate buffer have been studied by means of potentiostatic and galvanostatic techniques, along with a rotating ring-disc electrode (RRDE). The analysis of results has shown that phosphate ions play an important role in the corrosion of amalgam. The anodic reaction leads to the formation of soluble species and a passivating film, which is probably composed of tin hydroxide and tin phosphate.     

Copolymerizations of ethylene with 1–decene over various ansa–metallocene complexes combined with Al( i-Bu) 3/ [CPh 3] [B(C 6F 5) 4] cocatalyst

Copolymerizations of ethylene with 1-decene were carried out with a series of stereospecific metallocene compounds, rac–(EBI)Zr(NMe₂)₂ [ 1, EBI = ethylene–1,2–bis( 1–indenyl)], rac–(EBI)Hf(NMe₂ (2), rac–Me₂Si( 1–C₅H₂–2–Me–4– ^t Bu)₂Zr(NMe₂)₂ (3), ethylidene(cyclopentadienyl)(9-fluorenyl)ZrMe2 [4, Et(Flu)(Cp)ZrMe2] and isopropylidene(cyclopentadienyl)(9–fluorenyl)ZrMe₂ [5, iPr(Flu)(Cp)ZrMe₂], combined with Al(i–Bu)₃/[CPh₃] [B(C₆F₅)₄] cocatalyst. All catalyst systems showed very high copolymerization rates and the 1–decene reactivity decreased in the order of 2 > 5 > 1 4 > 3. The reactivity product of ethylene and 1–decene (r _E x r _D) was below 1 except 3 catalyst, corresponding to random copolymer structures with an alternating character. The melting point (T_m), crystallinity (X_C), intrinsic viscosity ([] and density of the 1–decene/ethylene copolymers decreased markedly with an increase in the 1–decene content, regardless of the type of catalytic system.