Menopausal transition of Korean immigrant women: a literature review

The menopausal transition needs to be understood in terms of the multiple mediating factors within the context in which women experience it. For immigrant women especially, the menopausal experience is complicated by multiple transitions and social marginality, so it cannot be adequately explained without considering this complexity. In this paper we review the literature on the menopausal transition of a group of vulnerable immigrant women in two ways: describing the transitions themselves (menopause, immigration, and housewife to employee), and describing factors that mediate the menopausal transition experience (family norms, meaning of menopause and women's work, and health practices). We emphasize the context and suggest areas of needed research.     

Synthesis and characterization of wholly aromatic polyamides containing pendent amino and cyano groups

The new pyrazole-ring containing diamine monomer with amino and cyano groups, 1,3-di-p-aminophenyl-4-cyano-5-aminopyrazole (PYA), was prepared from 4-nitrobenzoyl chloride and 4-nitrophenyl hydrazine with 4 steps. The monomer was converted to polyamides with terephthaloyl chloride and isophthaloyl chloride. The amino and cyano groups on the pyrazole-ring were not affected during polymerization. The synthesized polyamides having intrinsic viscosities of 0.92 – 1.18 dL/g were amorphous, and soluble in polar aprotic solvents and boiling acetone and THF. The polymers had high glass transition temperatures and high thermal stability. 5% weight loss temperatures in nitrogen occurred around 490 °C, but these polymers are partially degraded at 300 °C in air due to the amino group on the pyrazole-ring. Received: 6 March 1997/Accepted: 1 April 1997     

Recent Progress of Innovative Perovskite Hybrid Solar Cells

Recently, innovative perovskite hybrid solar cells have attracted great interest in solar cell research fields, such as dye-sensitized solar cells, organic photovoltaics, thin-film solar cells, and silicon solar cells, because their device efficiencies are gradually approaching those of crystalline Si solar cells, and they can be fabricated by cheap low-temperature solution processes. Here, we review the recent progress of innovative perovskite hybrid solar cells. The introduction includes the general concerns about solar cells and why we need innovative solar cells. The second part explains the structure and the material properties of hybrid perovskite materials. We focus on why the hybrid perovskite materials can exhibit excellent solar cell properties, such as high open-circuit voltage. The third part introduces recent progress in innovative perovskite hybrid solar cells, in terms of device architecture and deposition methods for dense perovskite thin films with full surface coverage. The device architecture is important in attaining high power conversion efficiency; the device operating mechanism is dependent on the device structure; and the pinhole-free dense perovskite thin films with full surface coverage are crucial for achieving high efficiency. Finally, we summarize the recent progress in perovskite hybrid solar cells, and the issues to be solved, in the summary and outlook section.     

Efficiency Enhancement of Bredigite‐Structure Ca14Mg2[SiO4]8:Eu2+ Phosphor via Partial Nitridation for Solid‐State Lighting Applications

We have synthesized a partially nitridated Ca_13.7Eu_0.3Mg₂Si₈O₃₂ (CMSN:Eu²⁺) using Si₃N₄ with a conventional solid‐state reaction and successfully determined the structural parameters by a combined Rietveld refinement method. The partial nitridation of Ca_13.7Eu_0.3Mg₂Si₈O₃₂ (CMS:Eu²⁺) led to a large enhancement in the luminescence intensity, as much as 148%. From the Rietveld refinement results, the anisotropic changes of the lattice parameters were observed for the partially nitridated samples. By incorporating this phosphor + red phosphor with an encapsulant on an InGaN light‐emitting diode (LED) (λ_max = 395 nm), white light with a color rendering index of 92 and a color temperature of 5320 K under 20 mA was obtained.     

使用校直辊工艺简易模拟方法的单层钢丝帘线质量评估

用作汽车轮胎增强材料的钢丝帘线是由盘条拉成细丝捻制而成。为满足轮胎的刚度需求,人们开发了不同类型的钢丝帘线。钢丝帘线的结构稳定性是其质量评估的重要因素之一。一般在钢丝帘线捻制工序后评估钢丝帘线的平直性和残余扭转。校直辊是利用周期弯曲变形来改善钢丝帘线的平直性和残余应力的一种装置。校直辊装置的工艺设计大多数情况下是基于工程师经验的反复试验,需要大量的时间和成本。因此需要一个有效工具来节省校直辊工艺设计的时间和成本。有限元分析模拟方法是校直辊工艺设计的一种有效选择。本工作提出通过有限元分析校直辊工艺数值模拟单层钢丝帘线质量的评估方法,以3×0.30单层钢丝帘线作为试验样品。简易模拟方法如     

Full-rate cooperative communications with spatial diversity for half-duplex uplink relay channels

This paper proposes a full-rate cooperative communication technique with spatial diversity for single-carrier transmissions. In order to achieve both the spatial diversity and the full-rate, data streams are simultaneously transmitted through all direct and relay channels with different phase rotation and cyclic delay patterns. The phase rotation and cyclic delay patterns are derived in the sense of minimizing interlayer interference and a corresponding destination structure is presented for decoupling each layer at the destination. Simulation results show that the proposed technique achieves spatial diversity without sacrificing spectral efficiency and outperforms conventional full-rate cooperative communication techniques.     

Anisotropic threshold stress intensity factor, KIH and crack growth rate in delayed hydride cracking of Zr-2.5Nb pressure tubes

The objectives of this study are to systematically investigate the delayed hydride cracking (DHC) velocity and the threshold-stress intensity factor, K _IH , of a Zr-2.5Nb pressure tube as a function of orientation and elucidate the cause of this anistropic DHC behavior. The DHC velocity as a function of orientation was determined using flattened cantilever beam specimens with 60 ppm H while the threshold-stress intensity factor K _IH , was evaluated as a function of orientation on the curved compact-tension (CT) and cantilever-beam (CB) specimens charged with hydrogen to 200 ppm H. To infer a difference in a stress gradient ahead of the crack tip as a function of orientation, tensile tests were conducted at temperatures ranging from room temperature (RT) to 560 °C using small tensile specimens of 2-mm-gage length taken from three directions of the tube. A textural change was investigated by comparing the inverse pole figures before and after DHC while the {10 7} pole figures were constructed to find out the growth pattern of the DHC crack as a function of orientation. Faster DHC velocity and lower K _IH were obtained over temperatures of 170 °C to 270 °C, when the DHC crack grew in the longitudinal direction of the Zr-2.5Nb pressure tube. The strain hardening after yielding and the extent of the textural change accompanied by DHC were higher in the longitudinal direction of the tube, suggesting a higher stress gradient ahead of the crack tip. Thus, the anisotropic DHC behavior of a Zr-2.5Nb pressure tube is discussed based on the stress gradient ahead of the crack tip governed by strain-hardening rate after yielding and a change in texture accompanied by DHC, and the distribution of the {10 7} hydride habit planes. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Cavity formation from inclusions in ductile fracture

The previously proposed conditions for cavity formation from equiaxed inclusions in ductile fracture have been examined. Critical local elastic energy conditions are found to be necessary but not sufficient for cavity formation. The interfacial strength must also be reached on part of the boundary. For inclusions larger than about 100Å the energy condition is always satisfied when the interfacial strength is reached and cavities form by a critical interfacial stress condition. For smaller cavities the stored elastic energy is insufficient to open up interfacial cavities spontaneously. Approximate continuum analyses for extreme idealizations of matrix behavior furnish relatively close limits for the interfacial stress concentration for strain hardening matrices flowing around rigid non-yielding equiaxed inclusions. Such analyses give that in pure shear loading the maximum interfacial stress is very nearly equal to the equivalent flow stress in tension for the given state of plastic strain. Previously proposed models based on a local dissipation of deformation incompatibilities by the punching of dislocation loops lead to rather similar results for interfacial stress concentration when local plastic relaxation is allowed inside the loops. At very small volume fractions of second phase the inclusions do not interact for very substantial amounts of plastic strain. In this regime the interfacial stress is independent of inclusion size. At larger volume fractions of second phase, inclusions begin to interact after moderate amounts of plastic strain, and the interfacial stress concentration becomes dependent on second phase volume fraction. Some of the many reported instances of inclusion size effect in cavity formation can thus be satisfactorily explained by variations of volume fraction of second phase from point to point.     

100‐MHz CMOS circuits directly fabricated on plastic using sequential laterally solidified silicon

Abstract— CMOS TFT circuits were fabricated on plastic using sequential laterally solidified silicon combined with a low‐temperature CMOS process. The unity‐gain frequencies of the best of NMOS TFTs are greater than 250 MHz, and the CMOS ring oscillators operate at 100 MHz. To the best of the authors' knowledge, these are the highest‐frequency circuits ever fabricated directly on plastic. This high‐performance CMOS‐on‐plastic process can be applied to the fabrication of AMLCD integrated drivers and AMOLED pixels on plastic substrates.