Natural Convection of Nanofluid in Cylindrical Enclosure Filled with Porous Media

A numerical study has been carried out to investigate the effect of aspect ratio on heat transfer by natural convection of nanofluid taking Cu nano particles and the water as based fluid. The flow is laminar, steady state, axisymmetric two-dimensional in a vertical cylindrical channel filled with porous media. Heat is generated uniformly along the center of the channel with its vertical surface remain with cooled constant wall temperature and insulated horizontal top and bottom surfaces. The governing equations which used are continuity, momentum and energy equations using Darcy law and Boussinesq＇s approximation which are transformed to dimensionless equations. The finite difference approach is used to obtain all the computational results using the MATLAB-7 program. The parameters affected on the system are Rayleigh number ranging within （10≤ Ra ≤ 103）, aspect ratio （1 ≤ As 〈 5） and the volume fraction （0 ≤0 〈 0.2）. The results obtained are presented graphically in the form of streamline and isotherm contour plots and the results show that as ~ increase from 0.01 to 0.2 the value of the mean Nusselt number increase 50.4% for Ra = 1,000.     

Cold Spray Deposition of Freestanding Inconel Samples and Comparative Analysis with Selective Laser Melting

Cold spray offers the possibility of obtaining almost zero-porosity buildups with no theoretical limit to the thickness. Moreover, cold spray can eliminate particle melting, evaporation, crystallization, grain growth, unwanted oxidation, undesirable phases and thermally induced tensile residual stresses. Such characteristics can boost its potential to be used as an additive manufacturing technique. Indeed, deposition via cold spray is recently finding its path toward fabrication of freeform components since it can address the common challenges of powder-bed additive manufacturing techniques including major size constraints, deposition rate limitations and high process temperature. Herein, we prepared nickel-based superalloy Inconel 718 samples with cold spray technique and compared them with similar samples fabricated by selective laser melting method. The samples fabricated using both methods were characterized in terms of mechanical strength, microstructural and porosity characteristics, Vickers microhardness and residual stresses distribution. Different heat treatment cycles were applied to the cold-sprayed samples in order to enhance their mechanical characteristics. The obtained data confirm that cold spray technique can be used as a complementary additive manufacturing method for fabrication of high-quality freestanding components where higher deposition rate, larger final size and lower fabrication temperatures are desired.     

Nonlinear analysis of size-dependent frequencies in porous FG curved nanotubes based on nonlocal strain gradient theory

A nonlocal strain gradient model is developed in this research to analyse the nonlinear frequencies of functionally graded porous curved nanotubes. It is assumed that the curved nanotube is in contact with a two-parameter nonlinear elastic foundation and is also subjected to the uniform temperature rise. The non-classical theory presented for curved nanotubes contains a nonlocal parameter and a material length scale parameter which can capture the size effect. A power law distribution function is used to describe the graded properties through the thickness direction of curved nanotubes. The even dispersion pattern is used to model the porosities distribution. The high-order shear deformation theory and the von Kármán type of geometric non-linearity are utilized to obtain the nonlinear governing equations of the structure. The size-dependent equations of motion for the large amplitude vibrations of curved nanotubes are obtained by employing Hamilton’s principle. The analytical solutions are extracted for the curved nanotube with immovable hinged-hinged boundary conditions. Size-dependent frequencies of the curved nanotube exposed to thermal field are obtained using the two-step perturbation technique and Galerkin procedure. The effects of important parameters such as nonlocal and length scale parameters, temperature field, elastic foundation, porosity, power law index and geometrical parameters are studied in detail.

     

An adaptive and efficient buffer management scheme for resource-constrained delay tolerant networks

Provisioning buffer management mechanism is especially crucial in resource-constrained delay tolerant networks (DTNs) as maximum data delivery ratio with minimum overhead is expected in highly congested environments. However, most DTN protocols do not consider resource limitations (e.g., buffer, bandwidth) and hence, results in performance degradation. To strangle and mitigate the impact of frequent buffer overflows, this paper presents an adaptive and efficient buffer management scheme called size-aware drop (SAD) that strives to improve buffer utilization and avoid unnecessary message drops. To improve data delivery ratio, SAD exactly determines the requirement based on differential of newly arrived message(s) and available space. To vacate inevitable space from a congested buffer, SAD strives to avoid redundant message drops and deliberate to pick and discard most appropriate message(s) to minimize overhead. The performance of SAD is validated through extensive simulations in realistic environments (i.e., resource-constrained and congested) with different mobility models (i.e., Random Waypoint and disaster). Simulation results demonstrate the performance supremacy of SAD in terms of delivery probability and overhead ratio besides other metrics when compared to contemporary schemes based on Epidemic (DOA and DLA) and PRoPHET (SHLI and MOFO).     

Behaviour of eccentric loading of FRP confined fibre steel reinforced concrete columns

This paper presents results of testing 16 specimens, 12 of which as columns under different eccentricities and four as beams under four point loading regime. All 16 specimens were circular in cross section and were made of reinforced concrete. Four specimens served as reference specimens and were just made of reinforced concrete. The next four specimens were wrapped with carbon fibre reinforced polymers (CFRP). The next four specimens had steel fibres added to the concrete. The final four specimens were reinforced with steel fibres and wrapped with CFRP. From each group of specimens, one specimen was tested as a column under a concentric load, the second specimen was tested as a column under 25 mm eccentricity, the third specimen was tested as a column under 50 mm eccentricity, and the final specimen was tested as a beam under four point loading regime. The experimental programme proved that the introduction of fibres as well as wrapping the specimens with FRP improve the properties of concrete, especially its ductility.     

Elimination of inclusions and evaporation control during melting of Ti-48Al-2Cr-2Nb-1B intermetallic alloy

Titanium aluminide intermetallic compounds have an excellent capability for use in engineering structures at high temperatures. In the present work the formation of Nb rich inclusions in microstructure and evaporation of Al during melting of γ-TiAl based alloy (Ti-48Al-2Cr-2Nb-1B (at %)) was studied. The results show that the inclusions cannot be removed even with a four-stage melting process, when elemental Nb is used as raw material. However, by replacing Nb with NbAl₃ and using a three-stage melting process, the inclusions were removed from microstructure and also evaporation of Al was reduced remarkably. Otherwise, with removing elemental Al from raw material by using TiAl compound, evaporation of Al will be very low. Increasing vessel pressure from 400 to 600 mbar will not influence evaporation of Al. The article is published in the original.     

Power quality impacts of high-penetration electric vehicle stations and renewable energy-based generators on power distribution systems

High-penetration renewable energy-based generators (REGs) in distribution systems have increased the importance of impact assessment involving these systems. This assessment focuses on power quality (PQ) and compatibility between REGs and existing system components. Electric vehicle (EV) technology has also recently achieved a substantial market share. This technology requires the development of charging stations similar to current petroleum fuelling stations in the near future. Thus, the effect of EV stations (EVSs) on PQ must also be considered. This study presents a PQ analysis on the effects of high-penetration EVS and REG systems, including wind turbines, grid-connected photovoltaics (PVs), and fuel cell (FC) power generation units on a modified 16-bus distribution system under different loading and weather conditions. All data on EVS, wind farm, PV, and FC units as well as weather conditions presented in this paper were collected from different power companies and the Malaysian Meteorological Department. The system is modelled and simulated using the MATLAB/Simulink software to study the effects of these technologies on system performances at various penetration levels. Simulation results indicated that the presence of high-penetration EVSs and REGs can cause severe PQ problems such as frequency and voltage fluctuations, voltage drop, harmonic distortion and power factor reduction.     

Rehabilitating destructed reinforced concrete T connections by steel straps

The aim of this paper is to present results of testing a full scale reinforced concrete T connection by static loading. The connection represents a beam–column connection. The beam and column had a square cross section with a 300 mm dimension. The height of the column was 2.9 m and the clear beam length was 1.4 m. The connection was initially tested to failure. Galvanised steel straps were used to rehabilitate the connection. Epoxy resin was used to fix the steel straps to the concrete surface. The connection was tested after the rehabilitation. Results of testing the rehabilitated connection show that the yield and ultimate loads were 65 kN and 95 kN, respectively, compared with the original test results of 75 kN and 84 kN, respectively. Based on results of the tests, it can be concluded that the rehabilitating method used in this study was effective in increasing the ultimate strength of the T connection.