Control of H2O generated during the CO2 hardening process in a casting mold

An additive reagent was introduced into a water glass binder system for enhancing the mechanical properties and dimension stability of a casting mold, and for improving the surface quality of a cast product. Two different processes with three different additive reagents were employed to investigate the relation between fracture strength of the mold and water (H₂O) existed in the mold. In processes I and II, the mold samples were coated with a water glass binder, and then dipped into different solutions with additive reagent after and before carbon dioxide (CO₂) hardening, respectively. The fracture strength of the mold was enhanced by reducing H₂O content in the mold, achieved by a hydrolysis reaction of additive reagents. In process I, the H₂O movement was restricted in the mold by the solid phase, converted from the water glass during CO₂ hardening. When employing process II, especially in the TEOS used as additive reagent, the fracture strength was significantly increased due to the effective reduction of H₂O content in the mold and the homogeneous generation of glass phase by a sol–gel reaction of the additives.     

Shelf‐life characteristics of fresh oysters and ground beef as affected by bacteriocin‐coated plastic packaging film

Fresh oysters and ground beef were wrapped in antimicrobial films coated with a bacteriocin (nisin or lacticin NK24) incorporated into a polyamide binder layer. The packaged foods were stored at 3 and 10 °C and changes in counts of total aerobic bacteria and coliform bacteria were monitored together with appropriate quality attributes in order to determine the influence of the bacteriocin‐coated films on quality preservation and shelf‐life extension. Compared to plain low‐density polyethylene film, plastic films with incorporated bacteriocins slowed down microbial growth on packaged oysters and ground beef at both temperatures, contributed in some degree to the preservation of chemical quality and extended shelf‐life significantly. The effects of the antimicrobial films on the suppression of coliform bacterial growth were more pronounced at 10 than at 3 °C , while the effects on total aerobic bacteria were consistently evident at both temperatures. There was no difference in food quality preservation between the two types of antimicrobial film. © 2002 Society of Chemical Industry     

Formation and Microwave Dielectric Properties of the Mg2V2O7 Ceramics

The formation process and microwave dielectric properties of the Mg₂V₂O₇ ceramics were investigated. The MgV₂O₆ phase that was formed at around 450°C interacted with remnant MgO above 590°C to form a homogeneous monoclinic Mg₂V₂O₇ phase. Finally, this monoclinic Mg₂V₂O₇ phase was changed to a triclinic Mg₂V₂O₇ phase for the specimen fired at 800°C. Sintering at 950°C for more than 5 h produced high-density triclinic Mg₂V₂O₇ ceramics. In particular, the Mg₂V₂O₇ ceramics sintered at 950°C for 10 h exhibited the good microwave dielectric properties of ɛ_r=10.5, Q × f =58 275 GHz, and τ_f=−26.9 ppm/°C.     

Synthesis of BaCu(B2O5) Ceramics and their Effect on the Sintering Temperature and Microwave Dielectric Properties of Ba(Zn1/3Nb2/3)O3 Ceramics

BaCu(B₂O₅) ceramics were synthesized and their microwave dielectric properties were investigated. BaCu(B₂O₅) phase was formed at 700°C and melted above 850°C. The BaCu(B₂O₅) ceramic sintered at 810°C had a dielectric constant (ɛ_r) of 7.4, a quality factor ( Q × f ) of 50 000 GHz and a temperature coefficient of resonance frequency (τ_f) of −32 ppm/°C. As the BaCu(B₂O₅) ceramic had a low melting temperature and good microwave dielectric properties, it can be used as a low-temperature sintering aid for microwave dielectric materials for low temperature co-fired ceramic application. When BaCu(B₂O₅) was added to the Ba(Zn_1/3Nb_2/3)O₃ (BZN) ceramic, BZN ceramics were well sintered even at 850°C. BaCu(B₂O₅) existed as a liquid phase during the sintering and assisted the densification of the BZN ceramic. Good microwave dielectric properties of Q × f =16 000 GHz, ɛ_r=35, and τ_f=22.1 ppm/°C were obtained for the BZN+6.0 mol% BaCu(B₂O₅) ceramic sintered at 875°C for 2 h.     

Shrinkage behavior and interfacial diffusion in Ni-based internal electrodes with BaTiO3 additive

The effects of particle size of starting materials and amount of a BaTiO₃ additive on the shrinkage behavior and elemental diffusion in Ni-based internal electrodes have been investigated in order to control the shrinkage of the internal electrode in multilayer ceramic capacitors (MLCCs). Two kinds of Ni and BaTiO₃ powders were used with different particle sizes. Volume shrinkage over the range of 700–1300 °C at 150 °C intervals and linear shrinkage during sintering were measured for starting materials and composites in a reducing atmosphere. The interfaces of Ni/BaTiO₃ composites with 90:10 and 70:30 volume ratios, respectively, were investigated using TEM. Composites with bimodal Ni powder show less shrinkage than those with monomodal Ni powder, showing less shrinkage in monolith Ni of bimodal particle size. The shrinkage behavior is changed during sintering with increasing amounts of BaTiO₃ additives in both Ni-based composites. The particle size of the BaTiO₃ additive affects the shrinkage behavior of composites, without the additional amount affecting the final shrinkage. A reaction layer of about 300 nm wide is observed at the interface between the Ni and BaTiO₃ powders in composites, in which elemental Ni diffuses into the BaTiO₃ without counterdiffusion.     

Identification of prevalent microbial flora in modified-atmosphere packaged cook-chilled Korean rice cake (backseolgi)

Preservation of backseolgi by modified-atmosphere packaging (MAP) method for industrial production was evaluated with respect to shelf life and a prevalent flora was identified. Backseolgi was stored in low-density polyethylene (LDP), top-sealing package (TSP), and MAP packages. The number of microflora did not substantially change in all samples at 3°C for 30 days, but rapidly increased in LDP and TSP samples at 30°C. MAP was the most effective storage method. With DNA sequence analysis, it appeared that the predominant contaminant belonged to the genus Penicillium, and it was named Penicillium sp. DA.     

Nonlinear finite element method models for ultimate strength analysis of steel stiffened-plate structures under combined biaxial compression and lateral pressure actions—Part II: Stiffened panels

The present paper (Part II) is a sequel to the previous paper (Part I) [Paik JK, Seo JK. Nonlinear finite element method models for ultimate strength analysis of steel stiffened-plate structures under combined biaxial compression and lateral pressure actions—Part I: Plate elements. Thin-Walled Struct 2008, this issue, doi:10.1016/j.tws.2008.08.005.] on the application of nonlinear finite element methods for ultimate strength analysis of steel stiffened-plate structures under combined biaxial compression and lateral pressure actions. In contrast to Part I dealing with plate elements, the present paper (Part II) treats stiffened panels surrounded by strong support members such as longitudinal girders and transverse frames. In similar to Part I, some important factors of influence such as structural dimensions, initial imperfections, loading types and computational techniques in association with ultimate limit states are studied. Some useful insights in terms of nonlinear finite element method modeling are developed using ANSYS code together with the ALPS/ULSAP semi-analytical method, the latter being for the purpose of a comparison.     

Magnetic-separable robust microbeads using a branched polymer for stable enzyme immobilization

Uniform magnetic separable robust microbeads using a branched polymer were successfully developed for stable enzyme immobilization. The changed morphology of the microbeads was shown by scanning electron microscopy (SEM) analysis. The aldehyde groups on the polymers and imine groups derived from the Schiff base reaction between the aldehyde and amine moiety were found as the evidence of these reactions based on Fourier transform infrared (FT-IR) spectroscopy. The amine groups of the enzyme react with the aldehyde groups on the glutaraldehyde polymer so that the stable conjugations are formed. The specific activity of the conjugated enzyme was found to be retained more than 50%, but the reaction rate constant, K_m value was not changed, compared to the free enzyme. In addition, the enzyme conjugated in the microbeads was found to be highly stable for more than 50 days, pertaining over 60% of its initial activity, even after being reused more than 15 times repeatedly. Furthermore, the magnetic-driven controllability provided facile separable characters for the repeated recycling. It is expected that these microbeads can be utilized as a key tool for successful realization not only in enzymatic conversion processes but also in extended fields; bio-based sensors or analytical devices, bioprocessing, bioremediation, to name only a few of numerous areas.     

Numerical method for predicting the elastic lateral distortional buckling moment of a mono-symmetric beam with web openings

When used as floor joists, the new mono-symmetric LiteSteel beam (LSB) sections require web openings to provide access for inspections and various services. The LSBs consist of two rectangular hollow flanges connected by a slender web, and are subjected to lateral distortional buckling effects in the intermediate span range. Their member capacity design formulae developed to date are based on their elastic lateral buckling moments, and only limited research has been undertaken to predict the elastic lateral buckling moments of LSBs with web openings. This paper addresses this research gap by reporting the development of web opening modelling techniques based on an equivalent reduced web thickness concept and a numerical method for predicting the elastic buckling moments of LSBs with circular web openings. The proposed numerical method was based on a formulation of the total potential energy of LSBs with circular web openings. The accuracy of the proposed method's use with the aforementioned modelling techniques was verified through comparison of its results with those of finite strip and finite element analyses of various LSBs.     

Interfacial reaction between 42Sn-58Bi solder and electroless Ni-P/immersion Au under bump metallurgy during aging

The interfacial reaction between 42Sn-58Bi solder (in wt.% unless specified otherwise) and electroless Ni-P/immersion Au was investigated before and after thermal aging, with a focus on the formation and growth of an intermetallic compound layer, consumption of under bump metallurgy (UBM), and bump shear strength. The immersion Au layer with thicknesses of 0 μm (bare Ni), 0.1 μm, and 1 μm was plated on a 5-μm-thick layer of electroless Ni-P (with 14–15 at.% P). The 42Sn-58Bi solder balls were then fabricated on three different UBM structures by using screen printing and pre-reflow. A Ni₃Sn₄ layer formed at the joint interface after the pre-reflow for all three UBM structures. On aging at 125°C, a quaternary phase, identified as Sn₇₇Ni₁₅Bi₆Au₂, was observed above the Ni₃Sn₄ layer in the UBM structures that contain Au. The thick Sn₇₇Ni₁₅Bi₆Au₂ layer degraded the integrity of the solder joint, and the shear strength of the solder bump was about 40% less than the nonaged joints.