Adaptive mode decision for H.264 encoder

An adaptive mode decision algorithm is presented, with rate-distortion optimisation that reduces the complexity of the H.264 encoder without loss of image quality and compression ratio. The proposed algorithm uses the property of an all-zero coefficients block that is produced by quantisation and coefficient thresholding to effectively skip unnecessary modes. Experimental results show that the speed of the adaptive mode decision algorithm is two times faster than the full-mode decision algorithm of the JM72 reference encoder, without any coding loss.     

Effect of organic vapour interaction on permeation rate through polymer films

The permeability coefficients (P) of linalool, citral ethyl butyrate, d-limonene and octanal permeating through LDPE and ionomer films were measured alone as individual and as a component of a mixture at a temperature of 23 °C and in saturated water vapour. Values of P for ionomer film were approximately two orders of magnitude below those for LDPE for the compounds tested. Both PET and PETG films were found to be much better barriers against the compounds tested than LDPE and ionomer films. In general, the permeability, diffusion and solubility coefficients (P. D, and S) values measured in mixture were substantially less than the values obtained individually. Permeability behaviour of these compounds at low concentrations in the mixture was similar to that of permanent gases. Reduction of solubility coefficients in mixture permeation was greater with the higher solubility coefficients. These results provide a better understanding of the mechanism of vapour diffusion through polymers.     

Synergistic cooperation between phorbol ester and IFN-gamma for induction of nitric oxide synthesis in murine peritoneal macrophages

The role of protein kinase C (PKC) in the induction of nitric oxide (NO) synthesis in murine peritoneal macrophages was examined. Phorbol ester, a PKC activator, had no effect on NO synthesis by itself, whereas IFN-gamma alone had modest activity. When phorbol ester was used in combination with IFN-gamma, there was a marked cooperative induction of NO synthesis in a dose-dependent manner. This increase in NO synthesis was reflected as increased amount of inducible NO synthase (iNOS) mRNA, as determined by Northern blotting. The optimal effect of phorbol ester was shown at 6 h after treatment with IFN-gamma. Phorbol ester also induced the release of NO to the incubation medium by bacillus Calmette-Guerin-infected peritoneal macrophages. Prolonged incubation of cells with phorbol ester, which down-regulates PKC activity, abolished the synergistic cooperative effect on NO production with IFN-gamma. In addition, such PKC inhibitors as staurosporin or polymyxin B reduced NO production induced by IFN-gamma plus phorbol ester. When the cells were treated with both actinomycin D and phorbol ester after IFN-gamma stimulation, more NO was produced and more iNOS mRNA was expressed than in the cells treated with actinomycin D alone. On the basis of these observations, we conclude that PKC might not be directly involved in the expression of NO synthase, but, instead, might be involved in the stabilization of the iNOS mRNA already expressed by the treatment of IFN-gamma.     

Architecture and implementation of the grand alliance HDTV video encoder

A high-definition television (HDTV) video compression encoder is being constructed for use during the standardization process for United States terrestrial broadcast HDTV. The encoder generates an MPEG-2 main profile/high level compliant bitstream at compressed data rates from 10–80 million bits/second. Both interlaced and progressive image formats in image sizes up to 1080 lines × 1920 pixels per line are supported.©1994 John Wiley & Sons Inc     

Bioinformatics and its role in the study of the evolution and probiotic potential of lactic acid bacteria

Food Science and Biotechnology - Due to their numerous well-established applications in the food industry, there have been many studies regarding the adaptation and evolution of lactic acid...     

Effect of kimchi powder level and drying methods on quality characteristics of breakfast sausage

This study was conducted to determine the effect of the addition of kimchi powder on the quality characteristics of meat batter and breakfast sausage. Breakfast sausages were supplemented with freeze dried kimchi powder (FKP) or hot air dried kimchi powder (HKP) at levels of 1% (FKP-1 and HKP-1) or 2% (FKP-2 and HKP-2). The emulsion stability, cooking yield, and apparent viscosity in meat batters improved with increments of kimchi powder (p < 0.05). Increased levels of kimchi powder in breakfast sausage decreased the L^∗ value, pH, and springiness, and increased the a^∗ value, b^∗ value, hardness, chewiness, and gumminess (p < 0.05). Sensory evaluations indicated that a higher overall acceptability was attained when the kimchi powder was added to breakfast sausage at a level of 2%.     

Metal Organic Framework Derived Materials: Progress and Prospects for the Energy Conversion and Storage

Exploring new materials with high efficiency and durability is the major requirement in the field of sustainable energy conversion and storage systems. Numerous techniques have been developed in last three decades to enhance the efficiency of the catalyst systems, control over the composition, structure, surface area, pore size, and moreover morphology of the particles. In this respect, metal organic framework (MOF) derived catalysts are emerged as the finest materials with tunable properties and activities for the energy conversion and storage. Recently, several nano‐ or microstructures of metal oxides, chalcogenides, phosphides, nitrides, carbides, alloys, carbon materials, or their hybrids are explored for the electrochemical energy conversion like oxygen evolution, hydrogen evolution, oxygen reduction, or battery materials. Interest on the efficient energy storage system is also growing looking at the practical applications. Though, several reviews are available on the synthesis and application of MOF and MOF derived materials, their applications for the electrochemical energy conversion and storage is totally a new field of research and developed recently. This review focuses on the systematic design of the materials from MOF and control over their inherent properties to enhance the electrochemical performances.     

Influence of Barium Dissolution on the Electrokinetic Properties of Colloidal BaTiO3 in an Aqueous Medium

Hysteresis in the electrokinetic behavior of colloidal hydrothermal BaTiO₃ occurs during sequential acid and base titrations. Ba dissolution during acid titration results in an oxide-rich surface. When the acid-treated BaTiO₃ is titrated back to pH 10, dissolved Ba is specifically adsorbed and/or precipitated onto the particle surface. The combined effects of dissolution and subsequent adsorption–precipitation results in titration hysteresis. Most of the labile Ba can be removed by multiple acid treatments, which result in a TiO₂-like surface layer composition. Barium dissolution increases with decreasing pH but levels off below pH 4 due to diffusion through the surface oxide layer as predicted previously. A phenomenological model is offered to explain the electrokinetic behavior as a function of pH. It is suggested that inherent BaCO₃ contamination is not the primary source of dissolved Ba from hydrothermal BaTiO₃ in acidic solution.     

Aqueous Processing of Sintered Reaction-Bonded Silicon Nitride: I, Dispersion Properties of Silicon Powder

An aqueous-based system (Si-Al₂O₃-Y₂O₃-Fe₂O₃) for processing sintered reaction-bonded silicon nitride (SRBSN) was investigated with an emphasis on chemical control of suspension component interactions. Chemical stability and dispersion properties of a commercial silicon powder were characterized using electroacoustic, adsorption isotherm, and rheological measurements. The interactions of silicon with nitriding agent, sintering aids, dispersants, and binder were considered. The effects of pH, electrolyte, aging, particle size, and solids loading were examined. The suspension properties of the silicon powder were influenced by the native oxide film and powder treatment history. The silicon-oxide composite particles exhibit dispersion behavior similar to silica, characterized by a negative surface potential above pH 2. A method to improve the dispersion and homogeneity of suspension components based on the use of quaternary amine dispersants is proposed.     

Transition behavior and phase segregation in TDI polyurethanes

Prior studies of two series of segmented polyurethanes based on 2, 4 toluene cliisocyanate (2, 4 TDI) or 2, 8 TDI, butanediol, and a 1000 molecular weight polytetramethyleneoxide (PTMO-1000) soft segment revealed a rapid increase in soft segment glass transition temperature (T_g) with increasing urethane content in the 2, 4 TDI series. The change in T_g couldbe correlated with estimates of hard segment-soft segment phase mixing obtained by infrared analysis of the urethane NH and carbonyl bands. In the present paper, the infrared data have been reevaluated using improved procedures for resolving the carbonyl band into H-bonded and nonbonded components, and the relation between the estimated extent of phase mixing and T_g has been reexamined. The transition behavior in an extensive series of related polymers has also been determined, including 2, 4 TDI arid 2, 6 TDI samples with PTMO2000 as well as polybutyleneadipate (PBA-1000 and PBA-2000) soft segments. The results indicate the effectiveness, of increased soft segment molecular weight in promoting phase segregation, imply that much greater phase mixing occurs in polyester than polyether samples, suggest that anchoring the ends of the soft segments has only a small effect on T_g, and provide some evidence that H-bonding not only increases T_g but can also impede soft segment crystallization.