二次加热和冷却方式对过共晶铝硅合金半固态组织的影响

过共晶Al 17%Si 4.5 %Cu 0 .5 %Mg合金通过Sr优化变质处理获得初晶硅细小且有α枝晶的显微组织。在固液两相区保温 ,结合金相分析研究组织的转变规律 ,结果表明 :共晶硅经历着熔断、粒状化和粗化的过程 ,初晶硅有长大的趋势 ;随着保温时间的延长 ,共晶体不断熔化成液相 ,液相体积分数逐渐增加 ,直至液相薄膜包围着α相 ,α相由不规则形状向球状转化 ,α相的粗化和合并几乎同时进行 ,最终获得非常理想的半固态组织。从形状系数和等效直径两个方面评价了近球形α相的特征。     

采矿爆破地震安全距离与设计参数的应用研究

依据爆破安全规程给出了实际检测资料的处理方法。根据爆破设计和检测数据拟合结果的差异性，讨论了爆破地震安全距离S随设计经验参数K、α值的变化规律和范围，得出K取最大值，α取最小值能够最大限度保证现场建筑物安全的结论。     

动态Cache技术在网站性能设计中的应用

本文主要讲述如何利用Cache技术,来有效的提高网站性能。以ASP.NET为基础,展示ASP.NET中使用Cache的新特性,主要应用了Databasedependencies技术。     

Proposed modification to the CIECAM02 colour appearance model to include the simultaneous contrast effects

A modified CIECAM02 colour appearance model, named CIECAM02‐m2, is proposed to enable CIECAM02 to predict the simultaneous contrast effect. The structure of the CIECAM02‐m2 is a development from CIECAM02, and contains two different procedures for modifying the reference white; one is for lightness and the other is for hue. The model was tested using a data set accumulated in this study and the LUTCHI data. The CV values for three colour attributes between predictions and experimental data were used to evaluate the accuracy of the model. The low CV values obtained show the performance of the CIECAM02‐m2 model to predict the simultaneous contrast effect satisfactorily. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 121 – 129, 2007     

塔河油田深井穿盐膏层钻井液技术

深井盐膏层钻井施工风险极大,常会引起卡钻和套管损坏,影响安全钻井。通过对塔河油田深井盐膏层矿物组分、理化特征等进行综合分析,阐明井壁失稳的主要原因,为选择钻井液体系提供理论基础;对适应于该段的钻井液体系和现场维护处理技术进行了探索,提出了欠饱和盐水钻井液技术方案,并在T913井、TK827井、TK1106井进行了现场应用。结果表明,井下复杂大幅度降低,钻井周期大幅度缩短,经济效益较好。     

利用模糊评判方法确定张东构造油藏储量计算的可靠程度

张巨河油田张东构造地处大港滩海交接处,海域部分探井少.目前用油藏描述方法计算的探明储量,其落实程度备受关注.储量落实程度的评价是一个多因素综合评判问题,而且这些因素还分属不同层次.模糊综合评判是应用较为广泛的模糊数学方法之一.该方法建立的综合评判涉及三个要素,即因素集、评判集和单因素评判,由此所构造的模糊评判关系是模糊综合评判的基础.本文用该方法对张东构造沙二段油藏的探明储量落实程度作了尝试性评价.     

Dominant mode characteristics of circular groove guide

Circular groove guide is a kind of waveguide for millimeter waves with low loss, large dimensions, and low dispersion. In this paper, the dominant mode characteristics of it is analysed. The technique that mode macthing method combines with point matching method is used to derive the Nth-order characteristic equation of the guide. The 1st order, 2nd order and 3rd order approximate curves that the normalized cutoff wavelength of circular groove guide varies with c/a are given. The attenuation curves are given at 1mm, 1.5mm and 3mm wavelength. The numerical results are in well agreement with the experimental results published.     

坐标测量机激光非接触式测头的研制

本文介绍适用子精密大型测试仪器──坐标测量机的激光非接触式测头的研制。该测头采用ＰＳＤ作为敏感元件并采用单片机技术完成对测量数据的处理。     

STUDY ON THE COAL DESULFURIZATION BY DILUTE ALKALI / ACID TREATMENT AND ITS MECHANISM

Sulfur in coal causes problems in coal processing and utilization, therefore the chemical beneficiation of coal has gained widespread attention. Using three coal samples with high sulfur content the effect of desulfurization has been studied. For Nantong coal containing 4.25% total sulfur under the condition sulfur reduction increased from 38.8% upto 62.4% the released sulfur was generally sulfate and pyrite, but the organic sulfur almost remained constant. When alkali treatment was performed at 370^°C, organic sulfur removal of Donglin and Yanzhou coal was to 50.6% and 57.3% respectively.     

Titanium alloys in total joint replacement--a materials science perspective

Increased use of titanium alloys as biomaterials is occurring due to their lower modulus, superior biocompatibility and enhanced corrosion resistance when compared to more conventional stainless steels and cobalt-based alloys. These attractive properties were a driving force for the early introduction of alpha (cpTi) and alpha + beta (Ti-6A1-4V) alloys as well as for the more recent development of new Ti-alloy compositions and orthopaedic metastable beta titanium alloys. The later possess enhanced biocompatibility, reduced elastic modulus, and superior strain-controlled and notch fatigue resistance. However, the poor shear strength and wear resistance of titanium alloys have nevertheless limited their biomedical use. Although the wear resistance of beta-Ti alloys has shown some improvement when compared to alpha + beta alloys, the ultimate utility of orthopaedic titanium alloys as wear components will require a more complete fundamental understanding of the wear mechanisms involved. This review examines current information on the physical and mechanical characteristics of titanium alloys used in artifical joint replacement prostheses, with a special focus on those issues associated with the long-term prosthetic requirements, e.g., fatigue and wear.