基于香豆素-NBD体系的荧光探针用于选择性检测和区分半胱氨酸、高半胱氨酸和谷胱甘肽

设计合成了一个可检测和区别半胱氨酸(Cys)、高半胱氨酸(Hcy)以及谷胱甘肽(GSH)的荧光探针1.通过将染料7-硝基苯并-2-氧杂-1,3-二唑(NBD)和马来酰亚胺基团引入3-氨基-7-羟基香豆素的两端,利用双重PET和ICT机理来降低探针自身荧光背景,同时结合2个不同的荧光团来提高选择性.此探针不仅易于制备,而且可以在温和的条件下,在水溶液中高选择性和高灵敏性的检测和区分Cys、Hcy以及GSH.     

N3-Kethoxal-Based Bioorthogonal Intracellular RNA Labeling

There is growing interest in developing intracellular RNA tools. Herein, we describe a strategy for N₃-kethoxal (N₃K)-based bioorthogonal intracellular RNA functionalization. With N₃K labeling followed by an in vivo click reaction with DBCO derivatives, RNA can be modified with fluorescent or phenol groups. This strategy provides a new way of labeling RNA inside cells.     

准贝氏体铸钢正火热处理工艺的研究

研究了准贝氏体铸钢不同奥氏体温度正火对其组织与力学性能的影响 ,结果表明 ,随奥氏体化温度的提高 ,准贝氏体铸钢的强韧性改善 ,在 10 4 0℃正火 ,准贝氏体铸钢具有最佳强韧性配合。分析了高温奥氏体化正火强韧性提高的原因。     

Effect of laser fluences on the structure of carbon nitride films deposited by direct current plasma assisted pulsed laser ablation

Carbon nitride films were deposited by direct current plasma assisted pulsed laser ablation of a graphite target under a nitrogen atmosphere at room temperature. The surface morphology, composition and bonding structure of the deposited films were characterized by atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, Raman, and X-ray photoelectron spectroscopy (XPS). The effect of laser fluences in the range 0.5–3 J/cm² on the surface morphology, composition and bonding structure of the carbon nitride films were systematically studied. As laser fluence is increased, AFM results show a great decrease in the surface roughness of carbon nitride films. FTIR and XPS results indicate an increase in the N/C ratio and the content of N atoms bonded to sp³ C, as well as a decrease in the content of H atoms and the content of N atoms boned to sp² C in the deposited films, and Raman spectra indicate an increase in the content of disordered sp² C atoms and the sp² cluster size. The increase in the film density and the decrease in the particle fraction contribute to the decrease of surface roughness with increasing laser fluence.     

逆向工程技术在复杂铸造模具制造中的应用

首先介绍了逆向工程技术与传统制造技术的区别,然后着重讨论利用逆向工程技术快速制造复杂铸造模具的过程及工艺路线,同时给出一些具体应用实例。最后得出与传统制造方法相比具有效率高、成本低、操作简单等优点的结论。     

甲苯—正庚烷—庚烯-(3)三元系统的气液平衡

测定了庚烯-（3）的蒸气压。用Gillespie型平衡器测定了甲苯—庚烯-（3）、正庚烷—庚烯-（3）二元系及甲苯—正庚烷—庚烯-（3）三元系统的平衡数据,并分别用Spinner及White方法验证了这些数据,计算结果与实验结果是符合的。三元系统气液平衡的数据不论在工程中或是实验工作上都很重要,过去对三元系统气液平衡的研究虽然有一些,但对甲苯—正庚烷—庚烯-（3）三元系统气液平衡至今在文献上尚未有记载。 由于庚烯-（3）的蒸气压数据不见于文献,我们测定了它的蒸气压数据。正庚烷—甲苯二元系统前人已有许多结果发表,我们进行了一些校核,结果与文献记载符合。甲苯—庚烯-（3）二元系统文献上没有,我们倣效了并用Spinner方法及White方法整理。至于正庚烷—庚烯-（3）二元系统,因为此两组分的性质（如沸点、n_D~（20）等）极其接近,分析误差较大,我们将其当作理想溶液处理,误差当在允许误差以内。 三元系统的分析较为繁难,误差也较大,故希望从理论和实验材料找出其规律性,以校核实验数据和推算未知三元系统。本工作利用三个二元系统的数据,用Spinner以及White的方法推算三元系统的气液平衡,与实验数据相比较,是相互符合的。     

聚铝溶液pH值及盐基度的相关性研究

为聚铝溶液进行了ＰＨ值和盐基度的分析和估算,给出了聚铝溶液的极限ＰＨ值和极限盐基度与总溶解铝浓度的关系曲线,最终计算结果表明：在平衡条件下,聚铝溶液的ＰＨ值和盐基度具有相关性,即当基中一个参数发生变化时。另一个参数必然要发生相应的改变。     

红河州磷肥厂6万t／a半水－二水法磷酸装置试生产情况

主要介绍了红河州磷肥厂引进的６万ｔ／ａ半水一二水法磷酸生产技术及三年来该装置的试生产情况，着重介绍了针对试生产中存在问题进行的技术改造。现该套装置运行正常，生产指标已接近设计值。     

MOLECULAR PRINCIPLE OF CORRESPONDING STATES FOR VISCOSITY AND THERMAL CONDUCTIVITY OF FLUID MIXTURES

Conformal solution theory is developed for the viscosity and thermal conductivity of fluid mixtures. The procedure involves expanding the transport coefficient for the mixture about the value for an ideal solution, using groupings of the potential parameters and molecular mass as expansion coefficients. The parameters for the ideal solution are chosen so as to annul the first-order term in this expansion, thus encouraging rapid convergence. This yields mixing rules (similar to those of the van der Waals 1 theory for thermodynamic properties) for the potential parameters and molecular mass of the reference fluid. Reference fluid properties are obtained from pure fluid corresponding states correlations

By making calculations for dilute gas mixtures and comparing with Chapman-Enskog theory, it is found that the first-order theory works well for mixtures of quite widely different energy parameters (ε) and molecular masses; it is more sensitive to the size difference of the molecular components, however. For cryogenic liquid mixtures composed of simple liquids good results are obtained using two-parameter corresponding states for the reference fluid. For polyatomic fluids it is necessary to use a three-parameter corresponding states approach for the pure fluids. A method of introducing a third parameter, while retaining the simplicity of having only two independent variables, is used for such fluids. Good results are obtained for a variety of binary mixtures. The method is of particular value for multicomponent fluids. Thus, without fitting any parameters from ternary data the theory predicts viscosities for the system carbon tetrachloride/n-hexane/benzene over the full composition range with a standard deviation of only 1.69%.