一种平衡设计压控振荡器和自动频率校准的快速锁定宽带频率综合器

A wideband fractional-N frequency synthesizer is implemented in a 65 nm CMOS process.It employs a wideband LC voltage-controlled oscillator(VCO) with optimized VCO gain(KVCO/and a sub-band step to improve automatic frequency calibration(AFC) efficiency at negligible expense of phase noise performance.An agile AFC is realized by direct mapping based on the division ratio,and optional redundant counting and comparing calibration is introduced accommodating PVT variations,which samples the reference clock using the prescaled VCO output as a discriminating clock.A charge pump with switched charging current is adopted to compensate for the loop bandwidth variation.Measurement results show this directly-mapped AFC locates the target sub-band in 100 ns and only needs 1.2 s for redundant calibration.The frequency synthesizer spans a frequency range from 0.62 to 1.52 GHz,with phase noise of-86 dBc/Hz at 10 kHz offset and-122 dBc/Hz at 1 MHz offset while consuming 9.76 mA from a 1.2 V supply.     

基于压缩感知的二维GTD模型参数估计方法

几何绕射理论(Geometrical Theory of Diffraction, GTD)模型能够精确描述高频区雷达目标的电磁散射机理。该文在分析雷达回波稀疏特性的基础上,将参数估计问题转化为压缩感知理论中的稀疏信号重构问题,据此提出了一种基于压缩感知的2维GTD模型参数估计方法。该方法首先利用2维傅里叶变换成像确定目标散射中心的支撑区域,然后在支撑区域内对散射中心的GTD参数进行估计,最后利用聚类方法和最小二乘方法对估计结果进行修正。仿真和暗室测量数据实验结果表明,与现有方法相比,所提方法能有效改善模型参数的估计性能,且对提高散射中心类型参数的估计精度更为明显。     

Focusing enhanced broadband metalens via height optimization

Metalenses are two-dimensional planar metamaterial lenses, which have the advantages of high efficiency and easy integration. Based on the method of spatial multiplexing, a metalens with a wide working waveband is designed by arranging TiO2 nanopillars under the resonance phase regulation. In addition, choosing an assistant metalens with optimized heights is effective to enhance metalens’s focusing, which is also illustrated in this paper. The metalens, designed with numerical aperture (NA) of 0.72 and center working wavelength of 600 nm, achieves the working waveband of 550—660 nm, the focus point’s size of below 420 nm, and the focusing efficiency of more than 30%.     

Highly Intensified Surface Enhanced Raman Scattering by Using Monolayer Graphene as the Nanospacer of Metal Film–Metal Nanoparticle Coupling System

It is widely accepted that surface enhanced Raman scattering (SERS) enhancement results from a combination of electromagnetic mechanisms (EM) and chemical mechanisms (CM). Recently, the nanoparticle‐film gap (NFG) system was studied due to its strong local enhancement field. However, there are still some technical limitations in establishing effective and simple ways for reliable and precise control of sub‐nanospacer. In addition, works on designing the nanospacer in NFG system for efficient interaction with target molecules for further improving SERS signals are rather limited. Here, a novel NFG system is proposed by introducing ultrathin monolayer graphene as well‐defined sub‐nanospacer between Ag NPs and Ag film (named G(graphene)‐NFG system). The new G–NFG system offers tremendous near‐field enhancement with one of the highest enhancement ratio of 1700 reported to date. These results show that the single‐layer graphene as a sub‐nanospacer renders the proposed G–NFG system with particularly strong EM enhancement (due to multiple couplings including the NP–NP couplings and NP‐film couplings) and additional CM enhancement in detecting some π‐conjugated molecules to function as a powerful tool in analytical science and the related fields.     

Enhanced Thermoelectric Properties of BiCuSeO/Polyaniline Composites

BiCuSeO/polyaniline (BCSO/PANI) bulk composites have been successfully fabricated by a ball-milling and hot-pressing method. Microstructure analysis shows that BCSO particles are well mixed and dispersed in the PANI matrix. Our results indicate that the Seebeck coefficient can be increased substantially by adding BCSO filler to the PANI matrix, especially for 40 wt.% BCSO (5–87 μV K^?1). Electrical conductivity and thermal conductivity both change slightly with the increasing filler content. The highest figure of merit, ZT, among these bulk composites is 0.004 at 341 K, which is almost 500 times greater than that of pure PANI.     

基于累积量的递归最小二乘算法研究

从基于累积量的均方误差（ＣＭＳＥ）准则,本文推导了一种基于累积量的递归最小二乘（ＣＲＬＳ）算法．并从信号检验和估计的角度对三阶ＣＲＩＳ算法中出现的加权求和系数给出的一种物理解释,以说明其抗高斯噪声的机理．本文提出应根据三种不同条件下信号的最优估计来确定最佳窗口函数的原则,并进一步证明了在极大似（ＭＬ）和线性均方（ＬＭＳ）估计意义下的最佳窗口都是矩形窗而非Ｄｅｌｏｐｏｕｌｏｓ和Ｇｉａｎｎａｋｉｓ建议的Ｈａｍｍｉｎｇ窗~［３］。仿真实验证实：ＣＲＬＳ算法采用矩形窗确定比采用Ｈａｍｍｉｎｇ窗具有更上的结果偏差。     

A novel sliding-mode observer for indirect position sensing ofswitched reluctance motor drives

A switched reluctance motor (SRM) drive generally requires a rotor position sensor for commutation and current control. However, the use of this position sensor increases both cost and size of the motor drive and causes limitations for industrial applications. In this paper, a novel indirect position sensing technique, namely, the sliding-mode observer, is proposed for SRM drives. The corresponding design approach and operating performance are provided to illustrate the fast convergence and high robustness of the observer against disturbances and variations     

基于脉冲调制的GSM语音信道数据传输方法

针对全球移动通信系统 (GSM) 的安全机制不能实现端到端安全通信问题,提出了一种低复杂度基于脉冲调制的数据传输方案及优化方法。分别设计了基于脉冲位置调制及脉位结合极性调制的类语音信号,给出了基于跳时脉冲的帧同步方法。搭建了基于脉冲调制的GSM语音信道数据传输仿真平台,分析比较了不同调制阶数和不同自适应多速率编码 (AMR) 码率下系统的性能。为了提高系统可靠性,引入卷积码进一步降低了系统误码率。仿真结果表明,4阶脉冲调制最适用于语音信道,所提脉冲调制方法与传统低复杂度频移键控 (FSK) 调制方式误码率近似,但传输速率高,且提出的脉位结合极性调制进一步提高了传输速率,总提高比例达到36%。     

热光关联成像的均方收敛无偏估计方法

关联成像实验和理论证明了光可以用特殊的方式传递信息。文中采用半经典理论,按照赝热光场、光电探测和关联计算的成像过程,系统分析了关联成像的理论基础,并给出了系统的视场、空间分辨率和对比度。在此基础上,对传统关联成像的线性计算方法进行了改进,使之为物体透射函数的均方收敛无偏估计。相应的计算鬼成像仿真实验表明:在相同测量次数下,尤其是低于奈奎斯特采样频率时,该方法显著提高了鬼像的峰值性噪比并有效抑制了背景噪声。     

高斜效率高功率850nm氧化限制型垂直腔面发射激光器

报道了MOCVD生长的高性能850nm氧化限制型垂直腔面发射激光器.研制出的氧化直径为9μm的激光器25℃时的斜效率和阈值电流分别为0.82mW/mA和2.59mA,激光器在23mA时输出16mW最大光功率.氧化直径为5μm的激光器25℃时的最小阈值电流为570μA,其最大饱和光功率为5.5mW.