卡尔曼滤波在核脉冲全谱数据采集系统中的应用

针对核脉冲全谱数据采集技术中采用的深度加权滤波法在数据量少时平滑效果差、滞后大的缺点,设计了卡尔曼滤波算法替代传统滤波算法进行解谱的方案。滤波算法首先根据信号与噪声的状态空间模型,建立状态方程和测量方程,然后根据广义卡尔曼滤波对测量方程进行更新,最后根据现场的标准刻度井测量数据确定测量矩阵,对测量数据进行滤波。实测结果表明,该滤波算法相对于传统滤波算法,能够消除谱图的统计涨落,提高光滑度,遏制滞后,并保证滤波后曲线不失真。     

无理数字典码的测试数据压缩方案

提出了一种无理数字典码的测试数据压缩方案,能有效地压缩芯片测试数据。方案利用无理数序列建立字典,编码时只需进行相容性检查,无需填充无关位,简化了操作步骤;同时,选择局部压缩率最大的一组数据作为最终编码结果,保证压缩效果可以达到局部最优。对ISCAS 89标准电路Mintest集的实验结果显示,该方案的压缩效果优于传统压缩方法,如Golomb码、FDR码、混合定变长码等。     

Preparations and properties of thermosensitive terpolymers of N‐isopropylacrylamide,sodium 2‐acrylamido‐2‐methyl‐propanesuphonate,and N‐tert‐butylacrylamide

Terpolymers based on N‐isopropylacrylamide, sodium 2‐acrylamido‐2‐methyl‐propanesulfonate, and N‐tert‐butylacrylamide were synthesized by free‐radical copolymerization with 2,2′‐azobisisobutyronitrile as an initiator. The lower critical solution temperatures (LCSTs) of the linear polymer aqueous solutions were determined by the measurement of the transmittance on UV at different temperatures. The influence of the polymer concentration, polymer composition, and ionic strength on the LCSTs of the linear polymers was investigated. The LCST decreased with increases in the hydrophobic monomer N‐tert‐butylacrylamide, polymer concentration, and ionic strength. The phase transition became sharp when the polymer concentration and ionic strength increased. Meanwhile, the crosslinked hydrogels were prepared with the same recipe used for the linear terpolymers, but a crosslinker was added to the reaction system. The swelling ratios of the hydrogels at various temperatures and salt solutions were determined. The hydrogels possessed both high swelling ratios and thermosensitivity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Integrated size and topology optimization of skeletal structures with exact frequency constraints

The present paper studies the integrated size and topology optimization of skeletal structures under natural frequency constraints. It is found that, unlike the conventional compliance-oriented topology optimization problems, the considered problem may be strongly singular in the sense that the corresponding feasible domain may be disconnected and the global optimal solutions are often located at the tips of some separated low dimensional sub-domains when the cross-sectional areas of the structural components are used as design variables. As in the case of stress-constrained topology optimization, this unpleasant behavior may prevent the gradient-based numerical optimization algorithms from finding the true optimal topologies. To overcome the difficulties posed by the strongly singular optima, some particular forms of area/moment of inertia-density interpolation schemes, which can restore the connectedness of the feasible domain, are proposed. Based on the proposed optimization model, the probability of finding the strongly singular optimum with gradient-based algorithms can be increased. Numerical examples demonstrate the effectiveness of the proposed approach.     

秋季太湖叶绿素a浓度荧光反演研究

基于2007年11~12月太湖全湖实测水质参数和光谱数据,首先利用高斯方程对遥感反射率进行过滤分解,找出叶绿素a(chl\|a)吸收峰675 nm以后的荧光反射峰(Fluorescence Peak:FP),再以662 nm处的反射率为基准,采用归一化荧光高度法进行叶绿素a浓度(C chl-a)反演,得到chl-a反演模型。基于高斯分解获取的chl-a的荧光反射峰值R(FP)与662 nm处的反射率R (662)比值［R(FP)/R(662)］与C chl-a之间存在显著的相关性,该模型为秋季太湖水体C chl-a的最佳反演模型。在高悬浮泥沙条件下,该模型能够较好地表示出叶绿素荧光高度与叶绿素浓度之间的关系,为C chl-a反演提供新的方法和依据,并为传感器敏感波段的选取和设置提供参考。     

Study of different effect on foaming process of biodegradable bionolle in supercritical carbon dioxide

Microcellular foaming of biodegradable Bionolle in supercritical CO₂ has been produced. The effects of a series of variable factors, such as saturation temperature, saturation pressure, and depressurization time and step on the foam structures and density, were studied through measurement of density and SEM observation. The experimental results show that higher saturation temperatures lead to an increase in bulk densities; and different depressurization time and step result in different product cell morphology. In addition, at some saturation temperature, the orientation of the cells can be found in the product morphology. XRD experimental results show that the foaming treatment with SC CO₂ increased the crystallinity of Bionolle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2901–2906, 2006     

高速公路收费站车辆能耗研究

车辆通过高速公路收费站时,需要减速或停车缴费,当车辆较多时,容易形成排队,产生大量延误,大大削弱了车辆的运行效率,增加了车辆的能耗,同时使得车辆尾气的排放量增加,严重污染了环境。本文使用排队论知识对收费站车辆排队与疏散情况进行分析,减少车辆的排队等候时间和驶离站口所需时间,以达到减少行车能耗的目的。最后,通过一个实例给出几种收费方式下的能耗,并给出了相应的分析和建议,可为高速公路收费方式和能耗研究提供一定的参考。     

Fractional partial differential equation denoising models for texture image

In this paper,a set of fractional partial differential equations based on fractional total variation and fractional steepest descent approach are proposed to address the problem of traditional drawbacks of PM and ROF multi-scale denoising for texture image.By extending Green,Gauss,Stokes and Euler-Lagrange formulas to fractional field,we can find that the integer formulas are just their special case of fractional ones.In order to improve the denoising capability,we proposed 4 fractional partial differential equation based multiscale denoising models,and then discussed their stabilities and convergence rate.Theoretic deduction and experimental evaluation demonstrate the stability and astringency of fractional steepest descent approach,and fractional nonlinearly multi-scale denoising capability and best value of parameters are discussed also.The experiments results prove that the ability for preserving high-frequency edge and complex texture information of the proposed denoising models are obviously superior to traditional integral based algorithms,especially for texture detail rich images.     

一种基于邻近性和团的异常数据检测算法

随着数据科学研究的不断深入,异常数据对数据分析工作的干扰也越来也大,如何有效检测异常数据已成为数据研究的关键问题之一.目前传统基于距离的方法仅考虑单个对象的异常性,缺少对正常对象之间如何抱团的分析,针对此问题,论文提出了一种基于邻近性(Proximity)和团(Clique)的异常检测算法——PCOD(Proximity Cliques Outlier Detec-tion)算法.该算法引入了图论中团的概念,通过团来解释正常对象之间的连接,根据数据对象间的连接性来分析数据点是否为异常点.PCOD算法主要包括两个步骤:首先,根据数据对象之间的邻近性,将数据中各个对象表示为存在边的无向图;再递归搜索图获取所有团集合,对所有的团进行分析并检测出没有抱团的异常点.最后,使用Arrhythmia、Pima、Vowel等UCI数据集进行实验,实验结果表明PCOD算法在精确率方面优于同类异常检测算法.     

大型饼类锻件锻造工艺研究综述

综述了饼类锻件锻造工艺的发展。大型饼类锻件是重型装备的核心部件之一,需要在液压机上进行自由锻造,由于其高径比远远小于1,实际生产中,废品率高,生产难度大,最严重的便是层状裂纹问题。为了克服这一问题,人们对饼类锻件进行了解剖检验,提出了压窝成形法、锥形板镦粗法等各种锻造工艺。