Spare node cooperative method for IEEE 802.11 networks

Most of the existing cooperation methods select relay node(s) mainly based on the channel state information, but do not consider whether the selected relay nodes work or not. If the selected relays are invalidated, the performance of cooperative communication will deteriorate. To resolve the above problem, this paper investigates cooperative communication in IEEE 802.11 networks, and proposes a novel Spare Cooperative Method (SCM). SCM chooses a spare cooperation node to enhance the reliability of communication, and uses an enhanced handshaking mechanism to coordinate the access of source nodes and cooperation nodes to the wireless channel. The performance of SCM is comprehensively analyzed in terms of outage probability and saturated throughput. The analysis shows that SCM improves the performance of IEEE 802.11.     

A Design-Based Structural Test Method for a Switched-Resistor DAC

In this paper, a design-based structural testing method is presented to enable a fast, low cost test for a switched-resistor digital-to-analogue converter (DAC). A 24-bit stereo DAC is used to demonstrate this. After schematic-level simulations and experimental verification, it is found that the dynamic parameter THD can be predicted by the static test. Practical production wafer test and final test results evaluate this structural test method by comparing it with the traditional THD test method. In this paper the simulation results, the relevant measurement results, and the testing results are discussed. Finally, the application recommendations are given.

A Review on Thin-film Sensing with Terahertz Waves

In the past two decades, the development and steady improvement of terahertz technology has motivated a wide range of scientific studies designed to discover and develop terahertz applications. Terahertz sensing is one such application, and its continued maturation is virtually guaranteed by the unique properties that materials exhibit in the terahertz frequency range. Thin-film sensing is one branch of this effort that has enjoyed diverse development in the last decade. Deeply subwavelength sample thicknesses impose great difficulties to conventional terahertz spectroscopy, yet sensing those samples is essential for a large number of applications. In this article we review terahertz thin-film sensing, summarizing the motivation, challenges, and state-of-the-art approaches based predominately on terahertz time-domain spectroscopy.     

Design,Construction, and Installation of Movable Electrode Biasing System on Tokamak

The first results of the movable electrode biasing experiments performed on the IR-T1 tokamak are presented. For this purpose, a movable electrode biasing system was designed, constructed, and installed on the IR-T1 tokamak, and then the positive voltage applied to an electrode inserted inside the tokamak limiter and the plasma current, poloidal and radial components of the magnetic fields, loop voltage, and diamagnetic flux in the absence and presence of the biased electrode were measured. Results compared and discussed.     

新型平板电离室的研制与初步测试北大核心CSCD

研制一款同时测量质子束流与剂量的平板电离室。利用基于有限元分析的Ansys模拟软件和Geant4蒙特卡罗软件对电离室电场分布、等效水厚度、不同能量质子束穿过电离室后的横向散射等参数进行模拟,进而优化电离室结构。并利用YXLON 450 kV X射线管、6 MeV脉冲加速器与北京大学串列加速器对电离室进行初步测试,电离室运行稳定,射线位置二维分布信息采集准确,性能良好。     

Dose Maps In/Around Target and Test Cell for DONES During the Operation

DONES (DEMO-Oriented Neutron Source) is to be constructed in order to investigate materials that are intended to be used for DEMO (DEMOnstration Power Plant) since they will be irradiated with very high fluxes of neutrons. A deuteron beam will bombard a lithium target situated in the so called Test Cell (TC) shielded with concrete. Monte Carlo simulations by means of the MCNP (Monte Carlo N-Particle) code were carried out to calculate both horizontal and vertical radiation dose maps in and around of the TC facility. Three geometrical configurations of the shielding and two kinds of concrete (ordinary and magnetite ones) were examined. For each case a spatial dose distribution and an accompanying errors map were provided. Advanced techniques of variance reduction were applied to compute doses in and outside of thick concrete walls. On the grounds of the obtained results a final configuration of the shielding was selected.     

Antimony Mobilization through Two Contrasting Gold Ore Processing Systems,New Zealand

Antimony, a toxic metalloid similar to arsenic, is present at variable levels in most gold-bearing rocks. Antimony is soluble in the surface environment, so antimony (Sb) mobilization in mine waters is an environmental issue around gold mines. The Reefton gold mine was originally developed in gold-bearing quartz veins; Sb concentrations were low (<100 mg/kg) compared to arsenic (As) concentrations (>1,000 mg/kg), and the mine waters had low dissolved Sb (<0.1 mg/L). A second stage of gold mineralization at Reefton involved brecciation and cataclasis of quartz veins and wall rocks, with addition of stibnite (Sb₂S₃). Processing of this ore has resulted in higher dissolved Sb in mine waters (0.1–1 mg/L), even after water treatment that removes most dissolved As (to 0.01 mg/L) by adsorption to suspended iron oxyhydroxide. Competition between As and Sb for adsorption sites on iron oxyhydroxide particles may have resulted in partial exclusion of the more weakly adsorbed Sb. The high rainfall (2,000 mm/year) at Reefton ensures adequate dilution of mine waters after discharge. The Macraes gold mine has no stibnite, and most Sb is in solid solution in the abundant arsenopyrite (Sb up to 2,000 mg/kg). Pit waters have both Sb and As dissolved up to 0.1 mg/L, partly because of evaporative concentration in a low-rainfall environment. Macraes tailings waters have high As (up to 3 mg/L) but negligible Sb (<0.001 mg/L). Reefton mine gold-bearing concentrate, containing stibnite, is transported 700 km to be processed by autoclave oxidation and cyanidation at the Macraes mine. This introduction of additional Sb to the Macraes site substantially increases the Sb content of the process stream periodically. Tailings from this process have up to 3 wt% Sb, dispersed through As-rich iron oxyhydroxides that are formed in the autoclave. The Sb-rich tailings are strongly diluted (approximately 100:1) by the Macraes tailings, and adsorption of Sb to iron oxyhydroxides in the tailings piles ensures that there has been no increase in the Sb content of the tailings water since the Reefton concentrate has been added at Macraes.     

Analysis of electricity consumption: a study in the wood products industry

This paper evaluates the effect of industry segment, year, and US region on electricity consumption per employee, per dollar sales, and per square foot of plant area for wood products industries. Data was extracted from the Industrial Assessment Center (IAC) database and imported into MS Excel. The extracted dataset was examined for outliers and abnormalities with outliers outside the quantile range 0.5–99.5 dropped from the analysis. A logarithmic transformation was applied to eliminate the skewness of the original data distributions. Correlation measurements indicated a moderate association between the response variables; therefore, a multivariate analysis of variance test was performed to measure the impact of the three factors: industry type, year, and region, simultaneously on all response variables. The results indicated some effect associated with all three factors on the three measures of electricity consumption. Subsequently, univariate ANOVA tests were conducted to determine the levels of the factors that were different. Most levels of industry type were associated with significantly different energy consumption, an expected result since some of the industries are more energy intensive than others. The industries in Standard Industry Code (SIC) 2493 (reconstituted wood products) are the groups with the highest electricity consumption with means of 38,096.28 kWh/employee, 0.86 kWh/sales, and 154.14 kWh/plant area while industries grouped in SIC 2451 (mobile homes) have the smallest consumption with means of 6811.01 kWh/employee, 0.05 kWh/sales, and 9.45 kWh/plant area. Interestingly, differences in regional consumption were found to be linked to the proportion of industry types by region. Data analysis also indicated differences in electricity consumption per employee for the factor year, but for the other response variables, no differences were found. These main results indicate that industries in the wood products sector have different electricity consumption rates depending on the type of manufacturing processes they use. Therefore, industries in this sector can use these comparisons and metrics to benchmark their electricity consumption as well to understand better how electricity costs might vary depending on the region they are located.     

Generation of hydrogen from aluminum and water - Effect of metal oxide nanocrystals and water quality

Metal Oxides nanocrystals such as TiO₂, Co₃O₄, Cr₂O₃, Fe₂O_3, Mn₂O₃, NiO, CuO and ZnO were used as modifiers on the metallic aluminum (Al) powders for the production of hydrogen in deionized water or tap water at room temperature. In particular, the influences of TiO₂ nanocrystals with various crystal sizes on the production of hydrogen from the reaction in tap water under ambient condition were investigated in details. It was found that hydrogen was barely generated from metal Al powders in tap water at 25-45 °C but significantly produced in deionized water above 35 °C without any modifiers. TiO₂, Co₃O₄, and Cr₂O₃ nanocrystals were very effective to promote hydrogen generation from the reaction of Al and deionized water at 25 °C. In addition, while other oxide nanocrystals were ineffective to promote hydrogen generation in tap water, TiO₂ nanocrystals (P90, ∼14 nm in diameter) were found to be highly effective in facilitating the production of hydrogen from the reaction of Al with tap water, comparable to the well-known γ-Al₂O₃. The production of hydrogen over time was found to be dependent on the passive layer of metal Al, where Al(OH)₃ plays an important role during reaction. Pitting is proposed as the major mechanism behind the production of hydrogen in the nanocrystals TiO₂ (P90)-modified Al/tap water system, which is thought to be originated from point defects, and differ considerably from the uniform corrosion model.