Selective vapor sorption by polymers and cavitands on acoustic wave sensors: is this molecular recognition?

Selectivity patterns for the sorption of organic vapors from the gas phase into cavitand monolayers on acoustic wave sensors are very similar to those seen for sorption of the same vapors by amorphous polymers, demonstrating that the vapor/cavitand selectivity patterns are determined primarily by solubility interactions. The amorphous polymers serve as controls demonstrating that the three-dimensional structure of a cavitand layer is not primarily responsible for the selectivity observed. Binding and selectivity in the examples cited are governed primarily by general dispersion interactions and not by specific oriented interactions that could lead to molecular recognition.     

全固态裸露式Ag／AgCl参比电极的研制及应用

该文报道了一种树脂接界全固态裸露式Ag／Agcl参比电极,勿需电镀氯化,制备工艺简单,性能稳定,是对电解型Ag／AgCl参比电极的一大改进。可代替饱和甘汞电极作为通用型参比电极,同时可减少汞对环境所造成的二次污染,在温度大于75℃时仍能保持良好性能,突破了甘汞电极的局限。     

Semi‐global output feedback tracking control for fully actuated ships

An output feedback trajectory tracking controller for a kind of 3 degrees of freedom (DOF) ship motion nonlinear model is designed. The closed‐loop control system is proven to be uniformly semi‐globally exponential stable with a separate stability result for the observer by applying nonlinear cascaded system theory. Simulation results on a model ship, Cybership II, are presented to validate the proposed control scheme. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

火灾烟雾环境下人员逃生行为仿真研究

针对火灾时避难人员流动的基本特性及建筑物的设计布局对人群拥挤状况的影响,引入烟雾时逃生人员产生作用力的公式,并加入到社会力中,在保留计算疏散时间的基础上,提出了方向指示灯和避难方向指示灯对避难人员自驱力的影响方法.仿真实验结果表明,指示灯的设置以及设置的个数,对避难行为有重大的影响;对建筑设计人员具有一定的参考价值,同时给消防人员提供了救援过程中的最短时间要求.     

Ordered mesoporous Pd/SnO2 synthesized by a nanocasting route for high hydrogen sensing performance

Ordered mesoporous SnO₂ and mesoporous Pd/SnO₂ have been successfully synthesized via nanocasting method using the hexagonal mesoporous SBA-15 as template. Two different procedures, impregnation technique and direct synthesis, were utilized for the doping of Pd in the mesoporous SnO₂. The results of small angle X-ray diffraction (SAXD), nitrogen adsorption–desorption and transmission electron microscopy (TEM) demonstrate that the SnO₂ and Pd/SnO₂ display ordered mesoporous structures and high surface areas. Wide angle X-ray diffraction (WAXD) and X-ray photoelectron spectroscopy (XPS) reveal tetragonal structure of SnO₂ and the existence of Pd element. The sensing properties of mesoporous SnO₂ and mesoporous Pd/SnO₂ for H₂ were detected. The sensor utilizing mesoporous Pd/SnO₂ via direct synthesis method exhibits excellent response and recovery behavior and much higher sensitivity to H₂, compared to those using mesoporous SnO₂ and mesoporous Pd/SnO₂ via impregnation technique. It is believed that its high gas sensing performance is derived from the large surface area, high activity and well dispersion of Pd additive, as well as high porosity, which lead to highly effective surface interaction between the target gas molecules and the surface active sites.     

Evaluation of Landsat 8 OLI imagery for unsupervised inland water extraction

The successful launch of the Landsat 8 satellite continues the Earth observation of the Landsat series, which has been taking place for nearly 40 years. With the increase in the band number and the improved spectral range compared with the previous Landsat imagery, it will be possible to expand the application of the new Landsat 8 imagery. The purpose of this study is to explore water extraction based on the new Landsat 8 Operational Land Imager (OLI) imagery. According to the specific inland water conditions (clear water, turbid water, and eutrophic water), a number of highly adaptable water indices are assessed for water extraction using Landsat OLI imagery. The results show that clear water is the easiest to extract among the different types of waterbodies, with the highest average accuracy of 97%. The highest-accuracy methods are the automated water extraction index for shadow pixels (AWEI_sh), the normalized difference water index using bands 4 and 7 (NDWI₄₇), and the normalized difference water index using bands 3 and 7 (NDWI₃₇), with accuracies of 98.55%, 95.50%, and 96.61%, corresponding to clear water, turbid water, and eutrophic water, respectively. Through the analysis of the different methods for optimal band selection, the seventh band OLI7 (shortwave infrared 2, SWIR-2) of Landsat OLI shows the best performance in water identification. When applying the water indices to water extraction, Otsu’s algorithm has been used to automatically select the water threshold. Using extensive experiments with Otsu’s algorithm and a manual method, it was found that Otsu’s algorithm can replace manual selection and has the ability to select an accurate threshold for water extraction.     

Illumination robust single sample face recognition based on ESRC

Multimedia Tools and Applications - The extended sparse representation classifier (ESRC) is one of the state-of-the-art solutions for single sample face recognition, but it performs...     

Refined entanglement concentration for electron-spin entangled cluster states with quantum-dot spins in optical microcavities

We present a refined entanglement concentration protocol (ECP) for an arbitrary unknown less-entangled four-electron-spin cluster state by exploring the optical selection rules derived from the quantum-dot spins in one-sided optical microcavities. In our ECP, the parties obtain not only the four-electron-spin systems in the partial entanglement with two unknown parameters, but also the less-entangled two-electron-spin systems in the first step. Utilizing the above preserved systems as the resource for the second step of our ECP, the parties can obtain a standard cluster state by keeping the robust odd-parity instances with two parity-check gates. Meanwhile, the systems in the rest three instances can be used as the resource in the next round of our ECP. The success probability of our ECP is largely increased by iteration of the ECP process. Moreover, all the coefficients of our ECP are unknown for the parties without assistance of extra single electron-spin, so our ECP maybe has good applications in quantum communication network in the future.     

Topology optimization based on level set for a flexible multibody system modeled via ANCF

A topology optimization methodology is proposed for the flexible multibody system undergoing both large overall motion and large deformation. The system of concern is modeled via the absolute nodal coordinate formulation. The equivalent static load method is employed to transform the topology optimization of the nonlinear dynamic response of the system into a static one, and evaluated to adapt to the absolute nodal coordinate formulation by splitting the elastic deformations of the flexible components from the overall motions of those components. During the static topology optimization, the material interface is implicitly described as the zero level set of a higher-dimensional scalar function. Then, the semi-implicit level set method with the additive operator splitting algorithm is employed to solve the corresponding Hamilton-Jacobi partial differential equation. In addition, the expert evaluation method of weights based on the grey theory is utilized to define the objective function, and a modified augmented Lagrange multiplier method is proposed to treat the inequality volume constraint so as to avoid the oscillation and drift of the volume. Finally, two numerical examples are provided to validate the proposed methodology.