我国氢能产业发展和氢资源探讨

分析了我国氢能产业近期发展情况,我国氢能产业正步入快速发展机遇期。指出氢能是21世纪最具发展潜力的一种清洁二次能源,具有"清洁、高效、安全、可持续"四大特点,被誉为未来世界能源架构的核心。重点讨论了我国氢资源和绿色氢气制备问题,指出目前实际使用的氢气包括"灰氢""蓝氢"和"绿氢"三大类,显然"灰氢"不可取,"蓝氢"可以用,"废氢"可回收,"绿氢"是方向。讨论了加快氢能系统建设,建立发展氢气存储和运输系统及加氢站基础设施建设等问题。未来,我国氢能产业发展潜力巨大,但是在下决心大力发展氢能产业时,需要高度注意目前存在的实际情况和困难,要防范一系列的产业风险,做到有序发展,稳中有进,才能实施氢能产业的可持续发展。     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

Trusted Integrated Circuits: The Problem and Challenges

Hardware security has become more and more important in current information security architecture. Recently collected reports have shown that there may have been considerable hardware attacks prepared for possible military usage from all over the world. Due to the intrinsic difference from software security, hardware security has some special features and challenges. In order to guarantee hardware security, academia has proposed the concept of trusted integrated circuits, which aims at a secure circulation of IC design, manufacture and chip using. This paper reviews the main problems of trusted integrated circuits, and concludes four key domains of the trusted IC, namely the trusted IC design, trusted manufacture, trusted IP protection, and trusted chip authentication. The main challenges in those domains are also analyzed based on the current known techniques. Finally, the main limitations of the current techniques and possible future trends are discussed.     

粉煤灰物理序参量的系统化

近年来,作者等通过系列的粉煤灰特征化和系统化基础研究,形成了粉煤灰物理序参量系统。这个系统的实用性是能够提供大量有序信息,故称之为“脉搏系统”。本文介绍了粉煤灰物理序参量系统的构建。此系列的应用有助于粉煤灰资源开发及有利于粉煤灰质量从无序状态到相对稳定和有序状态的发展。     

Graft copolymerization of styrene and acrylonitrile onto EPDM

Acrylonitrile–EPDM–styrene (AES) graft copolymers were synthesized by solution graft polymerization of styrene (St) and acrylonitrile (AN) onto EPDM in an n‐hexane/benzene solvent with benzoyl peroxide (BPO) as an initiator. The structure changes were studied by an FTIR spectrophotometer. The grafting parameters were calculated gravimetrically. The influence of the polymerization conditions, such as the reaction time, concentration of the initiator, EPDM content, and weight ratio of St/AN, on the structure of the products was investigated. It was found that a proper initiator concentration and EPDM content will give a high grafting ratio of the AES resin. The thermal property of the copolymer was studied using programmed thermogravimetric analysis (TGA). The results showed that the copolymer has a better heat‐resistant property than that of ABS, especially for the initial decomposition temperature (T_in) and the maximum weight loss rate temperature (T_max). Also, the mechanism of the graft reaction was discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 428–432, 2002     

脱乙烷系统参数优化

吉化300kt/a乙烯装置脱乙烷系统采用德国Linde公司双塔双压前脱乙烷技术，自1996年开始以来，运行良好，通过工程技术人员近两年的探索实践，对其工艺参数做了较大的优化调整，取得了较好的经济效益。     

Artificial neural network approaches on composition-property relationships of jet fuels based on GC-MS

The relationships of composition-properties of 80 jet fuels concerning chemical compositions and several specification properties including density, flashpoint, freezing point, aniline point and net heat of combustion were studied. The chemical compositions of the jet fuels were determined by GC-MS, and grouped into eight classes of hydrocarbon compounds, including n-paraffins, isoparaffins, monocyclopraffins, dicyclopraffins, alkylbenzens, naphthalenes, tetralins, hydroaromatics. Several quantitative composition-property relationships were developed with three artificial neural network (ANN) approaches, including single-layer feedforward neural network (SLFNN), multiple layer feedforward neural network (MLFNN) and general regressed neural network (GRNN). It was found that SLFNNs are adequate to predict density, freezing point and net heat of combustion, while MLFNNs produce better results as far as the flash point and aniline point prediction are concerned. Comparisons with the multiple linear regression (MLR) correlations reported and the standard ASTM methods showed that ANN approaches of composition-property relationships are significant improvement on MLR correlations, and are comparable to the standard ASTM methods.     

强化单螺杆挤出机内层流混合的方法

综述了单螺杆挤出机内聚合物熔体层流混合机理的研究进展，对提高混合的措施进行了分析总结，指出了进一步强化混合效果的方法。     

磺化聚芳醚酮酮催化合成顺丁烯二酸二丁酯

以交联的聚芳醚酮酮和20％发烟硫酸合成了磺化聚芳醚酮酮树脂，并用于顺丁烯二酸酐和正丁醇的催化酯化，最佳条件：醇：酐为2．5：1（物质的量比）；催化剂用量为2．5g，反应温度140－150℃，反应时间7h ，酯化率96．4％。气相色谱分析结果：顺丁烯二酸二丁酯的含量达99．96％，催化剂易回收且可重复使用。     

单螺杆混沌挤出过程周期性行为数值模拟

建立了混沌单螺杆挤出机计量段物理和数学模型。定义了更合理的边界条件,采用Carreau本构方程,采用有限体积方法对聚合物熔体在螺槽内流动的周期性效应进行了数值模拟分析。得到了不同位置的速度分布细节以及流体示踪粒子的行为轨迹。发现螺槽内速度分布表现出周期性和对称性的变化,揭示了同宿点及椭圆点存在及位置不变性,为进一步分析流体质点在相空间的动力学行为奠定了基础。