Color segmentation robust to brightness variations by using B-spline curve modeling

Color segmentation takes a great attention because color is an effective and robust visual cue for characterizing an object from the others. However, color segmentation suffers from color variations incurred by irregular illumination changes. We propose a reliable color modeling approach in hue–saturation–intensity (HSI) color space while considering intensity information by adopting the B-spline curve fitting to make a mathematical model for statistical characteristics of a color with respect to intensity. It is based on the fact that color distribution of a single-colored object is not invariant with respect to brightness variations even in the HS (hue–saturation) plane. The statistical characteristics contain the mean and standard deviation of hue and saturation with respect to intensity. They are mathematically expressed as four bar graphs. In order to fit the bar graphs to continuous curves, we use B-spline curve fitting procedure. From several experimental results, we verify that the proposed algorithm is successfully applied to color segmentation under various illumination conditions.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

Electron‐beam deposition of MgO on plastic substrate and manufacturing flexible flat fluorescent lamp

Abstract— A flexible fluorescent lamp that utilizes the same plasma discharge mode as in PDPs has been manufactured. The structure of the flexible lamp is simple and easy to manufacture. All‐plastic materials including plastic substrates, barrier ribs (spacers), and sealants for low‐temperature manufacturing processing have been adopted except for the phosphor and MgO thin film. The MgO thin films were coated on the plastic substrates as a protection layer against the plasma discharge. The adhesion and biaxial texture of MgO thin film deposited on the plastic substrates, poly‐ethyle‐nenaphthalate (PEN) and polycarbonate (PC), at low temperature (100–180°C) has been characterized. The MgO film on PEN shows good adhesion under a repeated bending test. The manufactured flexible lamp consists of two plastic substrates of about 3 in. on the diagonal, barrier rib (spacer), and external ITO electrodes. The Ne‐Xe (5%) gas mixture at 100–200 Torr was used for the discharge gas. A maximum surface luminance of about 100 cd/m² was achieved for a 1 ‐kHz AC pulse.     

Pharmacophore and docking-based combined in-silico study of KDR inhibitors

The growth and metastasis of solid tumors is dependent on angiogenesis. The vascular endothelial growth factor (VEGF) and its cell surface receptor in human KDR (kinase domain containing receptor or VEGFR-2) have particular interest because of their importance in angiogenesis. The development of novel inhibitors of VEGFR-2 would be helpful to check the growth of tumors. Quantitative structure activity relationship (QSAR) analyses used to understand the structural factors affecting inhibitory potency of thiazole-substituted pyrazolone derivatives. Several pharmacophore-based models indicated the importance of steric, hydrophobic and hydrogen bond acceptor groups to inhibitory activity. The comparative molecular field analyses (CoMFA) and comparative molecular similarity indices analyses (CoMSIA) based 3D-QSAR models were derived using pharmacophore-based alignment. Both CoMFA (q² = 0.70, r² = 0.97 and ) and CoMSIA (q² = 0.54, r² = 0.82 and ) gave reasonable results. The molecular docking (receptor-guided technique) with a recently reported receptor structure (PDB = 1YWN) were performed. The docked alignment was subsequently used for 3D-QSAR (CoMFA; q² = 0.56, r² = 0.97, , CoMSIA; q² = 0.58 r² = 0.91, ). The overall both studies were indicated, steric, electrostatic and hydrogen bond acceptor effects contribute to the inhibitory activity. CoMFA and CoMSIA models suggested that a positive bulk with hydrophobic effect is desirable around position 4 and 5 and hydrogen bond acceptor groups around pyrazolones ring will be helpful.     

DEVS-Based modeling of VoIP spam callers’ behavior for SPIT level calculation

At the present time the VoIP (Voice over Internet Protocol) service is generally accepted as an alternative for people seeking cheaper means to make a phone call. Users of VoIP service may fall anywhere along a spectrum between types at two extremes: one of which is an ordinary caller who doesn’t use the telephone for commercial purposes, while the other is a person who generates spam calls for commercial purposes. The focus of this paper concerns modeling of spam callers’ behavior to calculate the SPIT (Spam over Internet Telephony) level for management of the quality of service. From the perspective of a VoIP service provider’s view, spam callers are also a type of customer and sometimes they are valuable for increasing revenue. However, if a service provider does not manage spam calls, it can harm their business, because ordinary users might not receive phone calls using the phone numbers of the VoIP service. Thus, there is a trade-off between revenues and usability in managing spam calls in the VoIP service. This work presents a model of spam caller’s behavior using the DEVS (Discrete Event System Specification) formalism. The DEVS formalism is applicable as a model of behavior, by defining the state and state transition of the target of the model. In our model, we use six main parameters to define the states and state transitions. Each state is represented by a number which indicates the SPIT level of a caller. If the value is 1.0 then the caller is more similar to a spam caller. Based on the model definition, we constructed a SPIT level Calculation UI (User Interface) that is used to manage spam calls to improve VoIP service quality.     

Effect of deposition temperature on dielectric properties of PECVD Ta2O5 thin film

Tantalum oxide film formation by plasma-enhanced chemical vapour deposition (PECVD) using TaCl₅ as a source material was examined. The effects of deposition temperature on the formation, structure and electric properties of the Ta₂O₅ film were investigated for Al/Ta₂O₅/ p-Si (MTS) capacitors. The deposition rate and refractive index increased with increasing deposition temperature. It was found that the structure of Ta₂O₅ deposited by PECVD was amorphous as-deposited. However, crystalline -Ta₂O₅ of hexagonal structure was formed by a 700 °C, 1 h heat treatment in argon. Capacitance and relative dielectric constant of the PECVD Ta₂O₅ were found to be 2.54 fF m^–2 and 23.5, respectively. The PECVD films obtained in this study have higher dielectric constants and remarkably better general film characteristics than those obtained by other deposition methods.     

Preparation of PbTiO3 thin films using an alkoxide-alkanolamine sol-gel system

The stable range of PbTiO₃ sol and the processing conditions of uniform thin films were investigated using a solution of titanium isopropoxide, three kinds of alkanolamines (monoethanolamine, diethanolamine, triethanolamine), lead acetate trihydrate and isopropanol. Depending on the sol state with various alkanolamine/alkoxide molar ratios, diethanolamine (DEA) was very effective in preparing uniform and dense oxide films through room-temperature reaction, owing to its superior stability during the hydrolysis and condensation reaction. Perovskite PbTiO₃ thin films were obtained on oxidized silicon wafer above 550 °C and completely pure films were obtained at 650 °C using DEA as a complexing agent. The dielectric constant and loss tangent of these thin films fired at 650 °C for 30 min were found to be 240 and 0.01 at 1 kHz, respectively.     

Correlated Quantum Phenomena of Spin–Orbit Coupled Perovskite Oxide Heterostructures: Cases of SrRuO3 and SrIrO3 Based Artificial Superlattices

Unexpected, yet useful functionalities emerge when two or more materials merge coherently. Artificial oxide superlattices realize atomic and crystal structures that are not available in nature, thus providing controllable correlated quantum phenomena. This review focuses on 4d and 5d perovskite oxide superlattices, in which the spin–orbit coupling plays a significant role compared with conventional 3d oxide superlattices. Modulations in crystal structures with octahedral distortion, phonon engineering, electronic structures, spin orderings, and dimensionality control are discussed for 4d oxide superlattices. Atomic and magnetic structures, J_eff = 1/2 pseudospin and charge fluctuations, and the integration of topology and correlation are discussed for 5d oxide superlattices. This review provides insights into how correlated quantum phenomena arise from the deliberate design of superlattice structures that give birth to novel functionalities.     

Room-Temperature-Processable Highly Reliable Resistive Switching Memory with Reconfigurability for Neuromorphic Computing and Ultrasonic Tissue Classification

Reversible metal-filamentary mechanism has been widely investigated to design an analog resistive switching memory (RSM) for neuromorphic hardware-implementation. However, uncontrollable filament-formation, inducing its reliability issues, has been a fundamental challenge. Here, an analog RSM with 3D ion transport channels that can provide unprecedentedly high reliability and robustness is demonstrated. This architecture is realized by a laser-assisted photo-thermochemical process, compatible with the back-end-of-line process and even applicable to a flexible format. These superior characteristics also lead to the proposal of a practical adaptive learning rule for hardware neural networks that can significantly simplify the voltage pulse application methodology even with high computing accuracy. A neural network, which can perform the biological tissue classification task using the ultrasound signals, is designed, and the simulation results confirm that this practical adaptive learning rule is efficient enough to classify these weak and complicated signals with high accuracy (97%). Furthermore, the proposed RSM can work as a diffusive-memristor at the opposite voltage polarity, exhibiting extremely stable threshold switching characteristics. In this mode, several crucial operations in biological nervous systems, such as Ca²⁺ dynamics and nonlinear integrate-and-fire functions of neurons, are successfully emulated. This reconfigurability is also exceedingly beneficial for decreasing the complexity of systems—requiring both drift- and diffusive-memristors.     

Rational Design and Synthesis of Extremely Efficient Macroporous CoSe2–CNT Composite Microspheres for Hydrogen Evolution Reaction

Uniquely structured CoSe₂–carbon nanotube (CNT) composite microspheres with optimized morphology for the hydrogen‐evolution reaction (HER) are prepared by spray pyrolysis and subsequent selenization. The ultrafine CoSe₂ nanocrystals uniformly decorate the entire macroporous CNT backbone in CoSe₂–CNT composite microspheres. The macroporous CNT backbone strongly improves the electrocatalytic activity of CoSe₂ by improving the electrical conductivity and minimizing the growth of CoSe₂ nanocrystals during the synthesis process. In addition, the macroporous structure resulting from the CNT backbone improves the electrocatalytic activity of the CoSe₂–CNT microspheres by increasing the removal rate of generated H₂ and minimizing the polarization of the electrode during HER. The CoSe₂–CNT composite microspheres demonstrate excellent catalytic activity for HER in an acidic medium (10 mA cm^?2 at an overpotential of ≈174 mV). The bare CoSe₂ powders exhibit moderate HER activity, with an overpotential of 226 mV at 10 mA cm^?2. The Tafel slopes for the CoSe₂–CNT composite and bare CoSe₂ powders are 37.8 and 58.9 mV dec^?1, respectively. The CoSe₂–CNT composite microspheres have a slightly larger Tafel slope than that of commercial carbon‐supported platinum nanoparticles, which is 30.2 mV dec^–1.