Defining the suitability of new crushed rock aggregate source areas in the North of Kocaeli Province using GIS

This study evaluated the current crushed rock aggregate resources and defined the suitability of potential crushed rock aggregate resource areas in the north of Kocaeli Province by using the geographical information system (GIS). Evaluation of the current aggregate market showed that almost 80 % of the total annual production (14.35 million tonnes) is supplied by the quarries located in Gebze and 20 % of the total annual production (3.65 million tonnes) is supplied by the quarries located in Hereke. The commercial crushed rock aggregate is totally supplied from the limestone and dolomite type carbonate rocks in the northern Kocaeli region. Defining the suitability of potential crushed rock aggregate resource areas was achieved by using GIS methods. First, an aggregate bedrock potential map was developed by using the geological map of the area and categorized as high, moderate and low bedrock potential areas. The high potential areas, which comprised almost 25 % of the northern Kocaeli region, contain carbonate rocks with varying physical, chemical and engineering properties. Secondly, the suitability of the bedrock potential areas was checked by considering the land-use, distance to the county centres and distance to major roads and highways layers in the weighted overlay function of the GIS. The resulting final map contained not suitable, low suitability and suitable areas for crushed rock aggregate. The suitable areas were grouped into three zones according to their geographic distributions. Further, the most promising crushed rock aggregate areas were defined based on the previous field work and surveys in the suitable areas.     

Uncertainty Analysis of Four-Terminal-Pair Capacitance Characterization up 30 MHz

The Impedance Group Laboratories of National Metrology Institute of Turkey previously developed a new method for the characterization of Agilent 16380A-type four-terminal-pair air dielectric capacitance standards ranged from 1 to 1,000 pF up to 30 MHz. This method is based on obtaining all resonance frequencies of standard capacitors using a vector network analyzer in order to calculate inductive residual parameters of the standards. As a continuation of the study, this paper gives a detailed uncertainty analysis for the method.     

Conducting carbon/polymer composites as a catalyst support for proton exchange membrane fuel cells

Carbon/poly(3,4‐ethylene dioxythiophene) (C/PEDOT) composites are synthesized by in situ chemical oxidative polymerization of EDOT monomer on carbon black in order to decrease carbon corrosion that occurred in carbon‐supported catalysts used in proton exchange membrane fuel cell. The effects of different dopants including polystyrene sulfonic acid, p‐toluenesulfonic acid and camphorsulfonic acid with the addition of ethylene glycol or dimethyl sulfoxide on the properties of the composites are investigated. The synthesized composites are characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, surface area analysis and scanning electron microscope. Electrical conductivity is determined by using the four‐point probe technique. Electrochemical oxidation characteristics of the synthesized C/PEDOT composites are investigated by cyclic voltammetry by applying 1.2 V for 24 h. The composite prepared at 25 °C with p‐toluenesulfonic acid and ethylene glycol shows the best carbon corrosion resistance. Platinum‐supported catalyst by using this composite was prepared using microwave irradiation technique, and it was seen that the prepared catalyst did not significantly lose its hydrogen oxidation and oxygen reduction reaction activities after electrochemical oxidation. Copyright © 2013 John Wiley & Sons, Ltd.     

Polystyrene Containing Carbinolamine/Azomethine Potentially Useful as Antimicrobial Agent: Synthesis and Biological Evaluation

An investigation of antimicrobial properties of 12 novel modified polymer derived from the condensation reaction of (aminomethyl)polystyrene and four substitute salicylaldehyde (2-hydroxy benzaldehyde, 5-fluoro-2 hydroxy benzaldehyde, 5-fluoro-3-chloro-salicylaldehyde and 5-fluoro-3-methyl-salicylaldehyde) has been carried out and Cr(III) and Ni(II) complexes have been prepared. Modified polymers were characterized by magnetic susceptibility, elemental analyses, and spectral studies. The ¹H NMR and ¹³C NMR spectra analysis of the polymeric carbinolamine/azomethine were determined. In addition, surface morphology and composition were determined by SEM/EDX. Thermo gravimetric analyses of polymers were carried out in nitrogen atmosphere. Antibacterial activities of the polymers attached carbinolamine/azomethine and their complexes were studied by the well-diffusion method against Listeria monocytogenes 4b, Staphylococcus aureus, Escherichia coli, Salmonella typhi H, Brucella abortus, Staphylococcus epidermis sp., Micrococcus luteus, Shigella dysenteria type 10, Bacillus cereus, Pseudomonas putida and antifungal activity against Candida albicans.     

Trend Assessment by the Innovative-Şen Method

Hydro-meteorological time series may include trend components mostly due to climate change since about three to four decades. Trend detection and identification in a better and refined manner are among the major current research topics in water resources domain. Even though different methodologies can be found for trend detection in literature, two well-known procedures are the Mann-Kendall (MK) trend test and recently innovative-?en trend method, which provides different aspects of the trend. The theoretical basis and application of these two methods are completely different. The MK test gives a holistic monotonic trend without any categorization of the time series into a set of clusters, but the innovative-?en method is based on cluster and provides categorical trend behavior in a given time series. The main purpose of this paper is to provide important differences between these two approaches and their possible similarities. The applications of the two approaches are given for hydro-meteorological records including relative humidity, temperature, precipitation and runoff from Ergene drainage basin in the north-western part of Turkey. It is observed that although MK trend test does not show significant trend almost in all the cases, the innovative-?en approach yields trend categorizations as “very low”, “low”, “medium” “high” and “very high”, which should be taken into consideration in future flood (“very high”) and drought (“very low”) studies.     

Formulation studies for mirtazapine orally disintegrating tablets

Abstract

Objective: Orally disintegrating tablets (ODTs) recently have gained much attention to fulfill the needs for pediatric, geriatric, and psychiatric patients with dysphagia. Aim of this study was to develop new ODT formulations containing mirtazapine, an antidepressant drug molecule having bitter taste, by using simple and inexpensive preparation methods such as coacervation, direct compression and to compare their characteristics with those of reference product (Remereon SolTab).

Materials and methods: Coacervation method was chosen for taste masking of mirtazapine. In vitro characterization studies such as diameter and thickness, weight variation, tablet hardness, tablet friability and disintegration time were performed on tablet formulations. Wetting time and in vitro dissolution tests of developed ODTs also studied using 900?mL 0.1?N HCl medium, 900?mL pH 6.8 phosphate buffer or 900?mL pH 4.5 acetate buffer at 37?±?0.2?°C as dissolution medium.

Results: Ratio of Eudragit® E-100 was chosen as 6% (w/w) since the dissolution profile of A1 (6% Eudragit® E-100) was found closer to the reference product than A2 (4% Eudragit® E-100) and A3 (8% Eudragit® E-100). Group D, E and F formulations were presented better results in terms of disintegration time. Dissolution results indicated that Group E and F formulations showed optimum properties in all three dissolution media.

Discussion: Formulations D1, D4, D5, E3, E4, F1 and F5 found suitable as ODT formulations due to their favorable disintegration times and dissolution profiles.

Conclusion: Developed mirtazapine ODTs were found promising in terms of showing the similar characteristics to the original formulation.     

Influence of T5 heat treatment on the microstructure and lubricated wear behavior of ternary ZnAl40Cu2 and quaternary ZnAl40Cu2Si2.5 alloys

A ternary ZnAl40Cu2 and a quaternary ZnAl40Cu2Si2.5 alloys were produced by permanent mold casting and subjected to T5 heat treatment at a temperature of 150 °C for 24 hours. The structural, mechanical and lubricated wear properties of these alloys were investigated in the as-cast and heat-treated conditions and the results were compared with those of SAE 65 (CuSn12) plain bearing bronze. Microstructure of the ternary alloy consisted of aluminum-rich α, eutectoid conversion product of α+η and ϵ phase located in the interdendritic channels. In addition to these phases, silicon particles were observed in the microstructure of the quaternary alloy. T5 heat treatment caused a considerable amount of reduction in the hardness, tensile strength and wear resistance of ZnAl40-based ternary and quaternary alloys, but improved their ductility and stability. These alloys in the as-cast and heat-treated conditions exhibited lower wear volume or higher wear resistance than SAE 65 bearing bronze. Among the experimental alloys, the optimum mechanical properties and wear performance were obtained from ZnAl40Cu2Si2.5 alloy in both as-cast and heat-treated conditions. Adhesion appeared to be the main wear mechanism for the ZnAl40-based alloys, but abrasion dominated the wear of SAE 65 bronze.