γ‐radiation‐induced preparation of polyamidoxime resins and their adsorption of methyl violet

Poly(acrylic acid–amidoxime) [P(AA–AO)] and poly(maleic acid–amidoxime) [P(MA–AO)] resins were prepared by the γ‐radiation‐induced copolymerization of acrylonitrile with acrylic acid and maleic acid, respectively. The obtained resins were amidoximated by reaction with hydroxylamine. The prepared resins were used for the removal of methyl violet (MV) dye from aqueous solutions. Batch adsorption studies were made by the measurement of the effects of pH, the amount of adsorbent, the contact time, and the adsorbate concentration. The adsorption isotherm of MV onto P(AA–AO) and P(MA–AO) was determined at 25°C with initial MV dye concentrations of 10–70 mg/L. The equilibrium data were analyzed with the Langmuir and Freundlich isotherm models. The equilibrium process was described well by the Langmuir isotherm model with maximum adsorption capacities of 398.4 and 396.8 mg/L for P(AA–AO) and P(MA–AO), respectively. The kinetics of adsorption of MV onto P(AA–AO) and P(MA–AO) are discussed. The pseudo‐second‐order kinetic model described the adsorption of MV onto P(AA–AO) and P(MA–AO) very well. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Curing behavior and properties of benzoxazine‐co‐self‐promoted phthalonitrile polymers

A new high‐performance copolymer was successfully obtained via concerted catalysis polymerization of mono‐functional benzoxazine (P‐a) and self‐promoted 4‐aminophenoxy phthalonitrile (4‐APN) monomers. The FTIR and DSC curves of the P‐a/4‐APN in different blend ratios suggested that the monomer blends can be completely cured without the addition of curing additive. The P‐a/4‐APN copolymers were cured at relatively lower curing temperatures and time. The TGA curves revealed that the P‐a/4‐APN copolymers have good thermal stability in terms of T₅, T₁₀, and char yield. A gradual increase in the glass transition temperature (T_g) values and decline were seen in the storage modulus as the loading of 4‐APN was increased from 10 to 30 wt % in the copolymer. The SEM analyses showed that copolymer's fracture surface is dendritic, showing the stress has been dispersed to a certain extent. The study revealed that the poly(P‐a/4‐APN) copolymer have much better thermal stabilities than the poly(P‐a), and the prepared copolymer can be used as a high‐performance thermosetting resin. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46578.     

Compressive mechanical properties of sawdust/high density polyethylene composites under various strain rate loadings

This article is concerned with the static and dynamic mechanical properties of high‐density polyethylene (HDPE) reinforced with sawdust (SD) at a strain rate of up to 10³ s^?1. In this study, the static and dynamic properties of HDPE/SD composites with different filler loadings of 5, 10, 15, 20, and 30 wt% SD were deliberated at different levels of strain rates (0.001, 0.01, 0.1, 650, 900, and 1100 s^?1) using a conventional universal testing machine and the split Hopkinson pressure bar apparatus. The results showed that the stress–strain curves, yield behavior, stiffness, and strength properties of the HDPE/SD composites were strongly affected by both the strain rate and the filler loadings. Furthermore, the rate sensitivityof the HDPE/SD composites showed a great dependency on the applied strain rate, increasing as the strain rate increased. However, the thermal activation values showed a contrary trend. Meanwhile, for the postdamage analysis, the results showed that the applied strain rates influenced the deformation behavior of the tested HDPE/SD composites. Moreover, for the fractographic analysis at dynamic loading, the composites showed that all the specimens underwent a severe catastrophic deformation. J. VINYL ADDIT. TECHNOL., 24:162–173, 2018. © 2016 Society of Plastics Engineers     

Influence of branching regularity on the behavior of hyperbranched polymers in solution

A carbosilane pseudo‐dendrimer with irregular structure and degree of branching DB = 1 was synthesized and fractionated. The molar masses of the obtained fractions ranged from 5000 to 490 000 g mol^?1. The hydrodynamic and conformational properties were studied by the methods of light scattering, sedimentation‐diffusion analysis and viscometry in dilute hexane and toluene solutions. The Mark ? Kuhn ? Houwink dependences were obtained. The results for the pseudo‐dendrimer are compared with the data for the initial hyperbranched poly(diallylcarbosilane) with DB = 0.5 and carbosilane dendrimer. It is shown that the solution properties of the pseudo‐dendrimer are close to those for the irregular hyperbranched polymer and differ significantly from the dendrimer behavior. Hence, it is branching regularity rather than the degree of branching that determines the conformational and hydrodynamic properties of hyperbranched polymers with a high degree of branching DB ≥ 0.5. © 2014 Society of Chemical Industry     

Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend

Thermal properties of fossil fuel are the key fundamental characteristics, which can distinguish any compound as a potential fuel. The performance of diesel fuel blend along with stability and solubility parameter designs are evaluated. The results from the experimental study indicate that the increase in hydrogen peroxide (H₂O₂) amount enhances the cetane number of diesel fuel blend significantly. However, the calorific value decreases as compared to pure diesel fuel. All values performed well according to the ASTM D‐975 diesel testing method. The thermodynamics of the prepared fuel blends also revealed that substantial solubility and diesel/H₂O₂ blend stability are provided even at lower temperatures. Such blends can be used as a feasible replacement of pure diesel fuel.     

Magnetic Nanoparticle Arrays Self-Assembled on Perpendicular Magnetic Recording Media

We study magnetic-field directed self-assembly of magnetic nanoparticles onto templates recorded on perpendicular magnetic recording media, and quantify feature width and height as a function of assembly time. Feature widths are determined from Scanning Electron Microscope (SEM) images, while heights are obtained with Atomic Force Microscopy (AFM). For short assembly times, widths were ~150 nm, while heights were ~14 nm, a single nanoparticle on average with a 10:1 aspect ratio. For long assembly times, widths approach 550 nm, while the average height grows to 3 nanoparticles, ~35 nm; a 16:1 aspect ratio. We perform magnetometry on these self-assembled structures and observe the slope of the magnetic moment vs. field curve increases with time. This increase suggests magnetic nanoparticle interactions evolve from nanoparticle–nanoparticle interactions to cluster–cluster interactions as opposed to feature–feature interactions. We suggest the aspect ratio increase occurs because the magnetic field gradients are strongest near the transitions between recorded regions in perpendicular media. If these gradients can be optimized for assembly, strong potential exists for using perpendicular recording templates to assemble complex heterogeneous materials.     

Pseudohalogenation of methyl 9-hydroxy-cis-12-and 12-hydroxy-cis-9-octadecenoate

Pseudohalogenation of methyl 9-hydroxy-cis-12-octadecenoate (I) and methyl 12-hydroxy-cis-9-octadecenoate (II) has been carried out with N,N-dibromobenzenesulfonamide (NNDBS). Compounds I and II, on reaction with NNDBS, formed four and three products, respectively. The interesting feature of these reactions was the formation of 1,4-epoxy compounds. The structures of individual compounds were established with the help of elemental and spectral analysis.     

Effects of functionalization conditions of sulfonic acid grafted SBA-15 on catalytic activity in the esterification of glycerol to monoglyceride: a factorial design approach

A series of propyl sulfonic acid-modified SBA-15 catalysts (SBA-15SO₃H) was prepared under various conditions using post-functionalization approach. A factorial design coupled with response surface analysis were employed to evaluate the effects of the preparation conditions on the catalyst activity. Optimization of the conditions to find the most active SBA-15SO₃H catalyst with the highest activity in glycerol esterification with lauric acid at 160?°C for 6?h was also made. Amount of 3-(mercaptopropyl)trimethoxysilane (MPTMS) and reflux time were chosen as parameters of the preparation conditions. The presence of propyl sulfonic acid groups in SBA-15SO₃H catalysts was confirmed by FT-TIR method. The catalysts were also characterized by means of surface analysis, XRD, TEM and TGA. The results obtained from the statistical models suggested that the amount of MPTMS was more important parameter to influence the activity compared to the reflux time. The optimum preparation condition was achieved at a reflux time of 20?h and an MPTMS amount of 1?mL/gram SBA-15 to obtain the SBA-15SO₃H(1) with the highest monoglyceride selectivity (70.2%) and corresponding lauric acid conversion (95%) in the esterification process.     

Substrate Temperature Dependent Surface Morphology and Photoluminescence of Germanium Quantum Dots Grown by Radio Frequency Magnetron Sputtering

The visible luminescence from Ge nanoparticles and nanocrystallites has generated interest due to the feasibility of tuning band gap by controlling the sizes. Germanium (Ge) quantum dots (QDs) with average diameter ~16 to 8 nm are synthesized by radio frequency magnetron sputtering under different growth conditions. These QDs with narrow size distribution and high density, characterized using atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) are obtained under the optimal growth conditions of 400 °C substrate temperature, 100 W radio frequency powers and 10 Sccm Argon flow. The possibility of surface passivation and configuration of these dots are confirmed by elemental energy dispersive X-ray (EDX) analysis. The room temperature strong visible photoluminescence (PL) from such QDs suggests their potential application in optoelectronics. The sample grown at 400 °C in particular, shows three PL peaks at around ~2.95 eV, 3.34 eV and 4.36 eV attributed to the interaction between Ge, GeO_x manifesting the possibility of the formation of core-shell structures. A red shift of ~0.11 eV in the PL peak is observed with decreasing substrate temperature. We assert that our easy and economic method is suitable for the large-scale production of Ge QDs useful in optoelectronic devices.     

Phenolic profiles of Turkish olives and olive oils

Phenolic compound distribution of Turkish olive cultivars and their matching olive oils together with the influence of growing region were investigated. One hundred and one samples of olives from 18 cultivars were collected during two crop years from west, south and south‐east regions of Turkey. The olives were processed to oils and both olive and olive oil samples were evaluated for their phenolic compound distribution. The results have shown that main phenolics of Turkish olives were tyrosol, oleuropein, p‐coumaric acid, verbascoside, luteolin 7‐O‐glucoside, rutin, trans cinnamic acid, luteolin, apigenin, cyanidin 3‐O‐glucoside and cyanidin 3‐O‐rutinoside. Oleuropein and trans cinnamic acid were present in higher amounts among all phenolics. Principal component analyses showed that the growing region did not have drastic effect on phenolic profile of olives. The major phenolic compounds of olive oils were tyrosol, syringic acid, p‐coumaric acid, luteolin‐7‐O‐glucoside, trans cinnamic acid, luteolin and apigenin. Luteolin is a predominant phenolic compound in almost all oil samples. Total phenol concentrations of Southeast Anatolian oils were found to be lower than those of the other regions.