New perylene derivative dyes for dye-sensitized solar cells

We have studied the influence of the spacer alkyl chain length of perylenemonoimide (PMI) dyes on the device performance in dye-sensitized solar cells (DSSCs). We observed that the dyes with longer and brunched alkyl chains exhibit higher efficiencies in DSSCs. In line with these statements we now report the highest efficiency obtained under standard conditions for a perylene imide derivative with PMI-DA1 that performs 300 mV open circuit voltage, 9.79 mA/cm² short-circuit current and 1.61% overall conversion efficiency.     

The optimum die profile for the cylindrical bending of plates

This paper presents a methodology for the design of plate-forming dies in cylindrical bending using optimization techniques to reduce the cost of die production by reducing the trial-and-error procedure considerably in determining the final die geometry. The plate thickness is discretized by plane-strain finite-elements. The die is taken to be rigid and its profile is approximated by Bezier curves the control-point coordinates of which are the design variables. The die profile is varied to minimize the difference between the required shape and the shape of the bent plate, considering springback action. The unconstrained optimization problem is solved by the BFGS (Broyden-Fletcher-Goldfarb-Shanno) method. A numerical example is presented where the optimum die profile is obtained for a plate bent into a quarter circle.     

Statistical evaluation of the damage potential of earthquake ground motions

This study focuses on the damage potential of earthquake ground motions based on the inelastic dynamic response of equivalent single degree of freedom structures. Their yield resistances are selected in accordance with seismic design codes. An index accounting for the accumulation of damage due to inelastic excursions is used to represent structural damage. A set of 94 ground motions are employed for this analysis, which are all scaled to the same peak ground acceleration of 0.4 g. Earthquake ground motions are classified with respect to both the ratio of peak velocity to peak acceleration (V/A ratio) and their effective excitation duration. The effect of these parameters on damage potential is investigated by using sensitivity analysis and probabilistic techniques. It is concluded that both V/A ratio and effective duration significantly influence the damage potential of earthquake ground motions, although they are not represented appropriately by the spectral definitions of earthquake excitations in seismic design codes.     

Magnetic Field‐Induced Phase Transformation in NiMnCoIn Magnetic Shape‐Memory Alloys—A New Actuation Mechanism with Large Work Output

Magnetic shape memory alloys (MSMAs) have recently been developed into a new class of functional materials that are capable of magnetic‐field‐induced actuation, mechanical sensing, magnetic refrigeration, and energy harvesting. In the present work, the magnetic &!hyphen;field‐induced martensitic phase transformation (FIPT) in Ni₄₅Mn_36.5Co₅In_13.5 MSMA single crystals is characterized as a new actuation mechanism with potential to result in ultra‐high actuation work outputs. The effects of the applied magnetic field on the transformation temperatures, magnetization, and superelastic response are investigated. The magnetic work output of NiMnCoIn alloys is determined to be more than 1 MJ m^?3 per Tesla, which is one order of magnitude higher than that of the most well‐known MSMAs, i.e., NiMnGa alloys. In addition, the work output of NiMnCoIn alloys is orientation independent, potentially surpassing the need for single crystals, and not limited by a saturation magnetic field, as opposed to NiMnGa MSMAs. Experimental and theoretical transformation strains and magnetostress levels are determined as a function of crystal orientation. It is found that [111]‐oriented crystals can demonstrate a magnetostress level of 140 MPa T^?1 with 1.2% axial strain under compression. These field‐induced stress and strain levels are significantly higher than those from existing piezoelectric and magnetostrictive actuators. A thermodynamical framework is introduced to comprehend the magnetic energy contributions during FIPT. The present work reveals that the magnetic FIPT mechanism is promising for magnetic actuation applications and provides new opportunities for applications requiring high actuation work‐outputs with relatively large actuation frequencies. One potential issue is the requirement for relatively high critical magnetic fields and field intervals (1.5–3 T) for the onset of FIPT and for reversible FIPT, respectively.     

False aneurysms in carotid arteries of cattle and water buffalo during shechita and halal slaughter

It has previously been shown that the cattle brain is supplied with blood via a basi-occipital plexus, in addition to branches from the carotid and basilar arteries. In addition it has been shown during conventional stunning and slaughter that the carotid arteries in cattle can develop false aneurysms at their severed ends and this can curtail exsanguination. This investigation examined whether false aneurysms can occur during religious slaughter, and during bleeding following electrical stunning that simultaneously induced a cardiac arrest. The prevalence of large (>3 cm outer diameter) false aneurysms in cattle carotid arteries was 10% for both shechita and halal slaughter. The prevalence of animals with bilateral false aneurysms (at least 2 cm in one artery and at least 3 cm diameter in the opposite artery) was 7% and 8% for shechita and halal slaughter, respectively. No false aneurysms occurred during bleeding in cattle that were electrically stunned and simultaneously developed a cardiac arrest. The combination of false aneurysms and collateral routes to the brain present a risk of sustained consciousness during religious slaughter in cattle.     

Scaling up microbial fuel cells

The goal of this study was to quantify the relation between the surface area of the current-limiting electrode of a microbial fuel cell (MFC) and the power density generated by the MFC. Shewanella oneidensis (MR-1) was grown anaerobically in the anodic compartment of an MFC utilizing lactate as the electron donor. Graphite plate electrodes of various sizes were used as anodes. Commercially available air electrodes, composed of manganese-based catalyzed carbon bonded to a current-collecting screen made of platinum mesh, were used as cathodes, and dissolved oxygen was used as the cathodic reactant. The surface area of the cathode was always significantly larger than that of the anode, to ensure that the anode was the current-limiting electrode. The power density generated by the MFC decreased as the surface area of the anode increased, which fits well with the trend we detected comparing various published results. Thus, our findings bring into question the assertion that the overall power density generated by an MFC with large electrodes can be estimated by extrapolating from an electrode with a small surface area. Our results indicate that the maximum power density generated by an MFC is not directly proportional to the surface area of the anode, but is instead proportional to the logarithm of the surface area of the anode.     

The Nucleation Effect of PbSe Additive on Bi2Sr2CaCu2Oδ Glass Ceramics

Glass and Ceramics - The crystallisation kinetics and effects of doping on Bi2Sr2CaCu2Oδ (BSCCO) glass ceramic system with 0.0%, 0.1%, 0.3% and 0.5% PbSe were investigated in this study....     

Dynamics of lead immobilization in sulfate reducing biofilms

We have evaluated the effects of selected minerals present in subsoil environment on the efficiency of lead removal from contaminated groundwaters using biofilms composed of sulfate-reducing microorganisms, and examined the stability of metal deposits after the biofilms had been temporarily exposed to the air. To quantify the studied effects, lead was immobilized in biofilms of Desulfovibrio desulfuricans grown anaerobically in two flat-plate flow reactors, one filled with hematite and the other with quartz. While the biofilms in both reactors were heterogeneous and consisted of voids and channels, the biofilms grown on hematite were denser, thicker, and more porous than those grown on quartz. The average H₂S concentrations, measured using microelectrodes, were higher in the biofilms grown on quartz than those measured in the biofilms grown on hematite. During 18 weeks of operation, iron was continuously released from the hematite. Lead was immobilized more efficiently in the biofilms grown on quartz than it was in the biofilms grown on hematite. Lead deposits were partially reoxidized, especially in biofilms grown on hematite, and the biofilms in both reactors responded to the presence of oxygen by lowering their density and increasing the H₂S production rate.     

Equilibrium and kinetics studies for adsorption of direct blue 71 from aqueous solution by wheat shells

This paper deals with the application of wheat shells (WS), an agricultural by-product, for the removal of direct blue 71 (DR) from aqueous solution. The characteristics of WS surface, such as surface area, Bohem titration and scanning electron microscopy (SEM) were obtained. The removal of direct blue 71 onto WS from aqueous solution was investigated by using parameters, such as pH, temperature, adsorbent dose, contact time and initial concentration. The adsorption process attains equilibrium within 36 h. The extent of dye removal decreased with increasing adsorbent dosage and also increased with increasing contact time, temperature, in solution concentration. Optimum pH value for dye adsorption was determined between 6 and 8. The experimental data were analysed by the Langmuir and Freundlich models of adsorption. It was found that the Langmuir equation fit better than the Freundlich equation. Maximum adsorption capacity (Q(m)) was calculated as at different temperatures (293, 303 and 313 K) 40.82, 45.66 and 46.30 mgg(-1), respectively. In addition, the adsorption data obtained at different temperatures of DR by WS were applied to pseudo first-order, pseudo second-order and Weber-Morris equations, and the rate constants of first-order adsorption (k(1)), the rate constants of second-order adsorption (k(2)) and intraparticle diffusion rate constants (k(3)) at these temperatures were calculated, respectively. The rates of adsorption were found to conform to pseudo second-order kinetics with good correlation (R(2)>or=0.9904). Also, free energy of adsorption (DeltaG degrees), enthalpy (DeltaH degrees), and entropy (DeltaS degrees) changes were determined to predict the nature of adsorption. Furthermore, the results indicate that WS could be employed as a low-cost alternative to other adsorbents in the removal of direct blue 71 from aqueous solution.