Crosslinking of ethylene propylene diene monomer (EPDM) by buckminsterfullerene

An EPDM (ethylene-propylene-ethylidene norbornene terpolymer) rubber has been dissolved in o-dichlorobenzene with 1 phr of C₆₀. When cast onto a glass slide and dried, an insoluble film exhibiting reversible elasticity forms. Received: 10 December 1996/Revised: 13 January 1997/Accepted: 17 January 1997     

Coordinated tuning of power system stabilizers in multimachine power systems

In this paper a new approach to simultaneously tuning the power system stabilizer (PSS) settings in a multimachine electric utility system is presented. The approach is based on eigenvalue assignment, which is treated as a problem of solving a set of non-linear equations. The possibility of meeting additional specified performance criteria is discussed. The flexibility of the proposed method is demonstrated using an operating utility system.     

Diagnosis of attention deficit hyperactivity disorder using non‐linear analysis of the EEG signal

Attention deficit hyperactivity disorder (ADHD) is a common behavioural disorder that may be found in 5%–8% of the children. Early diagnosis of ADHD is crucial for treating the disease and reducing its harmful effects on education, employment, relationships, and life quality. On the other hand, non‐linear analysis methods are widely applied in processing the electroencephalogram (EEG) signals. It has been proved that the brain neuronal activity and its related EEG signals have chaotic behaviour. Hence, chaotic indices can be employed to classify the EEG signals. In this study, a new approach is proposed based on the combination of some non‐linear features to distinguish ADHD from normal children. Lyapunov exponent, fractal dimension, correlation dimension and sample, fuzzy and approximate entropies are the non‐linear extracted features. For computing, the chaotic time series of obtained EEG in the brain frontal lobe (FP1, FP2, F3, F4, and Fz) need to be analysed. Experiments on a set of EEG signal obtained from 50 ADHD and 26 normal cases yielded a sensitivity, specificity, and accuracy of 98, 92.31, and 96.05%, respectively. The obtained accuracy provides a significant improvement in comparison to the other similar studies in identifying and classifying children with ADHD.Inspec keywords: feature extraction, time series, fractals, electroencephalography, medical disorders, neurophysiology, medical signal processing, entropy, signal classification, Lyapunov methodsOther keywords: nonlinear extracted features, chaotic time series, identifying classifying children, attention deficit hyperactivity disorder, nonlinear analysis methods, electroencephalogram signals, brain neuronal activity, chaotic behaviour, chaotic indices, EEG signals, nonlinear features, approximate entropies, common behavioural disorder, early diagnosis, life quality, ADHD     

Dynamic properties of calcareous and siliceous sands under isotropic and anisotropic stress conditions

The strain-dependent dynamic properties of sand are generally described by their relative density and mean effective stress, while the contribution of other factors, like soil origin, mineralogy, grain morphology, and initial stress anisotropy, have not been fully recognized. This paper presents the results of an experimental study on the shear modulus and damping ratio of calcareous and siliceous sands of different origins and their identical grain size distribution and stress-density states. Resonant column and cyclic triaxial tests were conducted on reconstituted samples of these two sands obtained from coastal areas. The significance of the initial effective confining pressure and stress anisotropy on the dynamic properties of the sands is evaluated and compared. It is demonstrated that the small-strain shear modulus of the calcareous sand is more affected by an increase in mean effective confining pressure than the siliceous sand. However, the effect of the initial shear on the secant shear modulus of the sands is unique. Based on the test data, a rigorous correction factor is proposed to account for the influence of the initial stress anisotropy on the small-strain shear modulus of the sands. A comparison between the strain-dependent dynamic properties of the calcareous and siliceous sands reveals that the calcareous sand has a higher secant shear modulus, lower damping ratio, and higher linear and volumetric threshold strain. Since the stress-density states and grain size distribution of the two sands were identical in the experiments, the discrepancy in the dynamic properties can be attributed to other factors, including sand origin, grain angularity, mineralogy, and formation processes, which are not commonly taken into account in the current practice.     

Eutectic Morphology in Alloy Pb – 3.2% Cd – 0.08% Sr for Battery Grids

Metal Science and Heat Treatment - Ageing of supersaturated solid solution in Pb – 3.2% Cd – 0.08% Sr alloy is studied at 20 and 80°C by measuring hardness, and light and scanning...     

Probiotic-Induced Tolerogenic Dendritic Cells: A Novel Therapy for Inflammatory Bowel Disease?

Inflammatory bowel diseases (IBDs) are immune-mediated, chronic relapsing diseases with a rising prevalence worldwide in both adult and pediatric populations. Treatment options for immune-mediated diseases, including IBDs, are traditional steroids, immunomodulators, and biologics, none of which are capable of inducing long-lasting remission in all patients. Dendritic cells (DCs) play a fundamental role in inducing tolerance and regulating T cells and their tolerogenic functions. Hence, modulation of intestinal mucosal immunity by DCs could provide a novel, additional tool for the treatment of IBD. Recent evidence indicates that probiotic bacteria might impact immunomodulation both in vitro and in vivo by regulating DCs’ maturation and producing tolerogenic DCs (tolDCs) which, in turn, might dampen inflammation. In this review, we will discuss this evidence and the mechanisms of action of probiotics and their metabolites in inducing tolDCs in IBDs and some conditions associated with them.     

Radon emanation from radium specific adsorbents

Pilot studies were undertaken to quantify the total activity of radon that is eluted following no-flow periods from several Ra-226 adsorbents loaded to near exhaustion. The adsorbents studied included two types of barium sulphate impregnated alumina (ABA-8000 and F-1) and Dowex MSC-1 resin treated by either barium hydroxide or barium chloride. In parallel, radium loaded plain activated aluminas and Dowex MSC-1 resin were similarly investigated. The results revealed that radon was quantitatively eluted during the first few bed volumes of column operation after no-flow periods. Although similar radon elution profiles were obtained, the position of the radon peak was found to vary and depended on the adsorbent type. Radon levels up to 24 and 14 kBq dm⁻³ were measured after a rest period of 72 h from radium exhausted Dowex MSC-1 treated with barium chloride and F-1 impregnated alumina with barium sulphate, respectively. The eluted radon values measured experimentally were compared to those calculated theoretically from accumulated radium quantities for the different media. For plain adsorbents, an agreement better than 10% was obtained. For treated resin-types a consistency within 30% but for impregnated alumina-types high discrepancy between respective values were obtained.     

Effects of annealing on phase evolution,microstructure and magnetic properties of mechanically synthesized nickel-ferrite

The influence of milling and subsequent annealing on nickel-ferrite phase formation was investigated by X-ray diffraction (XRD). Microstructure and magnetic properties of NiFe₂O₄ were determined by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and vibration sample magnetometry (VSM). Single phase nanosized nickel-ferrite was obtained by 30 h mechanical alloying (MA) and subsequent annealing at 600 °C for 1 h. Magnetic properties of the milled powder were extensively affected by the annealing temperature. Considerable growth of the particles and necking by sintering resulted from annealing at 1000 °C.     

Effect of specimen orientation and heat treatment on electroless Ni-PTFE-MoS<Subscript>2</Subscript> composite coatings

In this study, the effects of simultaneous co-deposition of polytetrafluoroethylene (PTFE) and MoS₂ particles on tribological properties of electroless nickel (EN) coating were studied. The influences of specimen orientation and heat treatment on EN-PTFE-MoS₂ composite coatings were also investigated. Scanning electron microscopy was used to study the morphology of coatings and the distributions of the lubricant particles in the deposits. Chemical analyses of coatings were done by electron dispersive spectrometry. The phases of the coatings were identified by X-ray diffraction utilizing CuKα radiation. Wear and friction properties of the coatings were also determined by pin-on-disk wear tester. The wear investigations showed that the EN-PTFE-MoS₂ composite coating performs better than EN-PTFE and EN-MoS₂ coatings in terms of friction coefficient and wear resistance. PTFE and MoS₂ contents of the EN-PTFE-MoS₂ coating were increased by changing the specimen orientation from vertical to horizontal configuration, which leads to enhancement in tribological properties of the coating. After heat treatment, the wear rate of EN matrix composite coating decreased with corresponding change in phase structure.     

Morphological,mechanical, and rheological studies of PVC/ABS blends in the presence of maleic anhydride

A novel method of enhancing compatibility in PVC/ABS blends is the use of ABS‐grafted‐(maleic anhydride) (ABS‐g‐MAH) as a compatibilizer. In this study, maleic anhydride was grafted onto ABS (initiated by peroxide) in an internal mixer. Grafting degree was determined by a back‐titration method, and certain amounts of the resultant ABS‐g‐MAH were added to PVC/ABS blends during their melt blending in the mixer. The weight ratio of PVC to ABS was kept at 70:30. Evaluation of compatibilization was accomplished via tensile and notched Izod impact tests, scanning electron microscopy (SEM), and rheological studies. According to the SEM micrographs, better dispersion of the rubber phase and its finer size in properly compatibilized blends were indications of better compatibility. Besides, in the presence of a proper amount [5 parts per hundred parts of PVC (php)] of ABS‐g‐MAH, PVC/ABS blends showed significantly higher impact strengths than uncompatibilized blends. This result, in turn, would be an indication of better compatibility. In the presence of 5 php of compatibilizer, the higher complex viscosity and storage modulus, as well as a lower loss modulus and loss factor in the range of frequency studied, indicated stronger interfacial adhesion as a result of interaction between maleic anhydride and the PVC‐SAN matrix. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers