Graphene nanoplatelets dispersion in poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactic acid): preparation method and its influence on electrical,crystallinity and thermomechanical properties

Poly(l-lactic acid) (PLLA)/graphene nanoplatelets (GnP) nanocomposites were prepared through solvent casting and coagulation methods. The better dispersion of graphene was achieved by ultrasounds and its effect on crystallinity, thermomechanical and electrical properties of PLLA were studied and compared in both methods. Differential scanning calorimetry (DSC) was used to investigate the crystallinity of PLLA and its composites. Field emission gun scanning electron microscope (FEG-SEM) and wide-angle X-ray scattering (WAXS) were employed to characterize the microstructure of PLLA crystallites. Dynamic mechanical thermal analysis (DMTA) was performed to study the thermomechanical properties of the nanocomposites. FEG-SEM images illustrated finer dispersion of GnP in samples obtained by coagulation method with respect to solvent casting method. Graphene imparted higher electrical conductivity to nanocomposites obtained by solvent casting under ultrasound due to better formation of graphene network. DSC thermograms and their resulting data showed positive effects of GnP on crystallization kinetics of PLLA in both methods enhanced by the nucleating effect of graphene particles. Meanwhile, the effect of GnP, as nucleating agent, was more prominent in samples produced by coagulation method without utilization of ultrasounds. WAXS patterns represented the same characteristic peaks of PLLA in nanocomposite specimens suggesting similar crystalline structure of PLLA in presence of graphene, and the intensified peaks of nanocomposites compared to neat PLLA confirmed the DSC results regarding its improved crystallinity. Graphene increased storage modulus in rubbery region and glass transition temperature of nanocomposites in the coagulation method due to restricted mobility of PLLA chains.     

Evaluation of soil liquefaction potential using energy approach: experimental and statistical investigation

Bulletin of Engineering Geology and the Environment - Liquefaction has caused many catastrophes during earthquakes in the past . The strain energy-based method is one of the modern methods used to...     

Mortality response of folate receptor-activated,PEG–functionalized TiO2 nanoparticles for doxorubicin loading with and without ultraviolet irradiation

TiO₂ nanoparticles (NPs) were synthesized by hydrothermal assisted sol–gel technique. In the next step, as-synthesized NPs were modified by poly ethylene glycol (PEG). Then, folic acid (FA) was conjugated to TiO₂–PEG. Finally, Doxorubicin (Dox) as an anticancer drug was loaded on as-prepared TiO₂–PEG–FA nanocarrier. The optimization of TiO₂ and FA concentration and the influence of ultraviolet (UV) irradiation on photocatalytic activity of nanocarrier and Dox loaded carrier were assessed by utilizing the 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT)-assay method.     

Use of a selective extractant-impregnated resin for removal of Pb(II) ion from waters and wastewaters: Kinetics,equilibrium and thermodynamic study

Adsorption of Pb(II) ion by a novel extractant-impregnated resin, EIR, was studied as a function of various experimental parameters using batch adsorption experiments. The new EIR was prepared by impregnating gallocyanine (GCN) onto Amberlite XAD-16 resin beads. The EIR was characterized by nitrogen analysis and SEM micrographs. The new EIR showed excellent selectivity factor values (α) for Pb(II) adsorption respect to other metal ions. The effects of some chemical and physical variables were evaluated and the optimum conditions were found for Pb(II) removal from aqueous solutions. The equilibrium adsorption isotherm was fitted with the Langmuir adsorption model. The maximum adsorption capacity (q_max) of EIR for Pb(II) ions was found to be 367.92 mg g⁻¹. The kinetic studies showed that the intra-particle diffusion is the rate-controlling step. Also, the intra-particle diffusion coefficients, D_ip values, were of the order of 10⁻¹² m² s⁻¹. The values of enthalpy (ΔH°) were positive, which confirms the endothermic nature of adsorption process. Also, the positive entropy changes (ΔS°) were showed that the randomness increased along with the adsorption process. In addition, the obtained negative values of Gibbs free energy (ΔG°) indicated feasible and spontaneous nature of the adsorption process at different temperatures. The new adsorbent was very stable so that it can be successfully used for many consecutive cycles without significant loss in its adsorption capacity.     

Novel Gemini Cationic Surfactants: Thermodynamic,Antimicrobial Susceptibility,and Corrosion Inhibition Behavior against Acidithiobacillus ferrooxidans

The Egyptian oil and gas industry is suffering from severe metal corrosion problems, particularly microbial-induced corrosion. There is limited knowledge on the corrosion inhibition of carbon steels in the presence of an acidophilic, iron-oxidizing bacterial species Acidithiobacillus ferrooxidans. Therefore, in this study, novel Gemini cationic surfactants, in three forms depending on variation in alkyl chains of 8, 12, and 16 carbon atoms named FHPAO, FHPAD, and FHPAH, respectively, were synthesized and characterized by Fourier transform infrared and nuclear magnetic resonance spectroscopy. The surface parameters and the thermodynamic of the synthesized surfactants were evaluated at three different temperatures, 20, 40, and 60 °C. The synthesized Gemini cationic surfactants were tested as broad-spectrum antimicrobial, antibacterial and anticandida agents. They evaluated as biocides and corrosion inhibitors against Acidithiobacillus ferrooxidans. FHPAD showed higher adsorption ability at the solution interface and higher affinity to construct micelles than FHPAO and FHPAH. Both adsorption and micellization processes were hydrophobic and temperature dependent. FHPAO, FHPAD and FHPAH exhibited wide-spectrum antimicrobial activities, and the highest activity and the lowest minimum bactericidal/fungicidal inhibitory concentrations were attributed to FHPAD. Furthermore, synthesized FHPAD demonstrated the highest metal corrosion inhibition efficiency of 95.5% at 5 mM in comparison to 87.5% and 81.7% for FHPAO and FHPAH, respectively. In conclusion, this study provides novel synthesized cationic surfactants with many applications in the oil and gas industry, such as broad-spectrum antimicrobial, biocides, and corrosion inhibitors for acidophilic, iron-oxidizing bacterial species Acidithiobacillus ferrooxidans.     

CFD modeling of immiscible liquids turbulent dispersion in Kenics static mixers: Focusing on droplet behavior

The present study is concerned with the computational fluid dynamics(CFD) simulation of turbulent dispersion of immiscible liquids, namely, water–silicone oil and water–benzene through Kenics static mixers using the Eulerian–Eulerian and Eulerian–Lagrangian approaches of the ANSYS Fluent 16.0 software. To study the droplet size distribution(DSD), the Eulerian formulation incorporating a population balance model(PBM) was employed. For the Eulerian–Lagrangian approach, a discrete phase model(DPM) in conjunction with the Eulerian approach for continuous phase simulation was used to predict the residence time distribution(RTD) of droplets.In both approaches, a shear stress transport(SST) k-ω turbulence model was used. For validation purposes, the simulated results were compared with the experimental data and theoretical values for the Fanning friction factor, Sauter mean diameter and the mean residence time. The reliability of the computational model was further assessed by comparing the results with the available empirical correlations for Fanning friction factor and Sauter mean diameter. In addition, the influence of important geometrical and operational parameters, including the number of mixing elements and Weber number, was studied. It was found that the proposed models are capable of predicting the performance of the Kenics static mixer reasonably well.     

Evolution in Structural and Optical Properties of Stannic Oxide Xerogel upon Heat Treatment

Upon consecutive heat treatments at increasing temperatures, the microstructure of solution–sol–gel-derived stannic oxide (SnO₂) xerogel evolves in three stages: (I) below 300°C, characterized by extensive dehydroxylation and gel shrinkage with little grain growth and surface loss; (II) between 300° and 500°C, by extensive crystallization, leading to dramatic surface loss (by 70%); and (III) above 500°C, by grain growth. Concurrently, the UV-absorption edge shows red shifts during stages I and II and blue shifts during stage III, resulting in distinct color variations. The edge displacement bears a close correlation with a Raman "defect band" at ∼305–328 cm⁻¹.     

Reducing of heat loss of rubber compound using natural zeolite filler: effect of partially substitution of fillers on compound properties

The main objective of this work was reducing the heat loss of styrene butadiene rubber by partial substitution of carbon black with natural zeolite as a filler. Reducing the usage of carbon black in the rubber industry is a good strategy to decrease fossil fuel usage and global warming. There are different mineral fillers like silica and clay to be used instead of carbon black. Effect of application of natural zeolite on reducing the heat loss of rubber compound based on SBR was investigated by melt mixing of natural zeolite in rubber matrix in an internal mixer. Natural zeolite was selected as 5, 10, 15, and 20 phr. Carbon black was partially substituted with zeolite and the effect of natural zeolite content and structure on different aspects of the compound including heat buildup, hardness, elongation, and modulus were evaluated. It was shown that although cross-link density and mechanical properties of the compounds decreased a little, but a significant improvement was observed in the fatigue resistance of the compounds beside a favorable decrease in the heat buildup and abrasion loss with an increase in the natural zeolite loading. The rate of improvement in properties was slowed down at zeolite contents higher than 5 phr.