Preparation and properties of novel polyurethane insulating coatings based on glycerin‐terminated urethane prepolymers and blocked isocyanate

Novel polyurethane insulating coatings were prepared from the reaction of glycerin‐terminated polyurethane prepolymers (GPUPs) and a blocked isocyanate curing agent (BIC). The GPUPs were prepared from the reaction of one equivalent of polycaprolactone polyol (CAPA 210) with an excess amount of 4,4′‐methylene bis(phenyl isocyanate) (MDI) and subsequent reaction of the NCO‐terminated polyurethane with glycerin. The BIC was prepared from the reaction of trimethylol propane (TMP), toluene diisocyanate (TDI) and N‐methylaniline (NMA). The polyols and curing agent were characterized by conventional methods while the curing condition was optimized via gel content measurements. The curing kinetics of the polyurethane coating were investigated and the kinetic parameters derived. The crosslink densities of the samples were determined via the equilibrium swelling method, using the Flory–Rehner equation. The relationships between the crosslink density and the electrical, physical, mechanical and dynamic mechanical properties of the coatings were also studied. Copyright © 2005 Society of Chemical Industry     

Prediction of ultrasonic wave velocity in particleboard and fiberboard

Ultrasonic wave velocities were determined at parallel and perpendicular to manufacturing direction and at the interval angles of 15° in clockwise and counterclockwise directions of particleboard and fiberboard. The experimental results were compared with the predicted values using some empirical formulae such as Hankinson and Jacoby equations. The results showed that the ultrasonic wave velocity were the highest in parallel direction in particleboard and fiberboard and decreases with increase of angle and the lowest values occurred in perpendicular direction. The predicted ultrasonic velocity using Hankinson and Jacoby equations are in close agreement with the measured values. Relationship between ultrasonic wave velocities and particles and fibers angle could be successfully presented by cubic and quadratic regression equations as well.     

Rotation-invariant multiresolution texture analysis using radon and wavelet transforms.

A new rotation-invariant texture-analysis technique using Radon and wavelet transforms is proposed. This technique utilizes the Radon transform to convert the rotation to translation and then applies a translation-invariant wavelet transform to the result to extract texture features. A kappa-nearest neighbors classifier is employed to classify texture patterns. A method to find the optimal number of projections for the Radon transform is proposed. It is shown that the extracted features generate an efficient orthogonal feature space. It is also shown that the proposed features extract both of the local and directional information of the texture patterns. The proposed method is robust to additive white noise as a result of summing pixel values to generate projections in the Radon transform step. To test and evaluate the method, we employed several sets of textures along with different wavelet bases. Experimental results show the superiority of the proposed method and its robustness to additive white noise in comparison with some recent texture-analysis methods.     

Watermarked 3-D Mesh Quality Assessment

This paper addresses the problem of assessing distortions produced by watermarking 3D meshes. In particular, a new methodology for subjective evaluation of the quality of 3D objects is proposed and implemented. Two objective metrics derived from measures of surface roughness are then proposed and their efficiency to predict the perceptual impact of 3D watermarking is assessed and compared with the state of the art. Results obtained show good correlations between the proposed objective metrics and subjective assessments by human observers     

Determination of vitality from a non-invasive biomedical measurement for use in fingerprint scanners

Fingerprints are the oldest and most widely used biometrics for personal identification. Unfortunately, it is usually possible to deceive automatic fingerprint identification systems by presenting a well-duplicated synthetic or dismembered finger. This paper introduces one method to provide fingerprint vitality authentication in order to solve this problem. Detection of a perspiration pattern over the fingertip skin identifies the vitality of a fingerprint. Mapping the two-dimensional fingerprint images into one-dimensional signals, two ensembles of measures, namely static and dynamic measures, are derived for classification. Static patterns as well as temporal changes in dielectric mosaic structure of the skin, caused by perspiration, demonstrate themselves in these signals. Using these measures, this algorithm quantifies the sweating pattern and makes a final decision about vitality of the fingerprint by a neural network trained by examples.     

Computerized facility layout design

The paper describes a computerized facility layout designer, COMLAD II, for plant layout development. Besides developing an efficient layout, COMLAD II has useful features which allow fixing the departments, changing the shape of the departments and changing the length and width dimensions of the overall layout.     

Antihyperglycemic activity of phenolics from Pterocarpus marsupium

Glucose levels in rats with hyperglycemia induced by streptozotocin were determined after i.p. administration of marsupsin (1), pterosupin (2), and pterostilbene (3), three important phenolic constituents of the heartwood of Pterocarpus marsupium. Marsupsin and pterostilbene significantly lowered the blood glucose level of hyperglycemic rats, and the effect was comparable to that of 1,1-dimethylbiguanide (metformin).     

An automated coding and classification system with supporting database for effective design of manufacturing systems

The philosophy of group technology (GT) is an important concept in the design of flexible manufacturing systems and manufacturing cells. Group technology is a manufacturing philosophy that identifies similar parts and groups them into families. Beside assigning unique codes to these parts, group technology developers intend to take advantage of part similarities during design and manufacturing processes. GT is not the answer to all manufacturing problems, but it is a good management technique with which to standardize efforts and eliminate duplication. Group technology classifies parts by assigning them to different families based on their similarities in: (1) design attributes (physical shape and size), and/or (2) manufacturing attributes (processing sequence). The manufacturing industry today is process focused; departments and sub units are no longer independent but are interdependent. If the product development process is to be optimized, engineering and manufacturing cannot remain independent any more: they must be coordinated. Each sub-system is a critical component within an integrated manufacturing framework. The coding and classification system is the basis of CAPP and the functioning and reliability of CAPP depends on the robustness of the coding system. The proposed coding system is considered superior to the previously proposed coding systems, in that it has the capability to migrate into multiple manufacturing environments. This article presents the design of a coding and classification system and the supporting database for manufacturing processes based on both design and manufacturing attributes of parts. An interface with the spreadsheet will calculate the machine operation costs for various processes. This menu-driven interactive package is implemented using dBASE-IV. Part Family formation is achieved using a KAMCELL package developed in TURBO Pascal.     

Influence of joint detail on the flexural/torsional interaction of thin-walled structures

For a structure formed from two thin-walled open members connected at 90°, torsion applied to one member can result in torsion as well as flexure in the second member, with the magnitude and direction of this torsion as well as flexure in the second member being determined by the type of joint used. Conventional structural analysis would normally assume the presence of only flexure in the second member. The results from a finite element study of structures formed from thin-walled channel sections connected by box, mitre and stiffened mitre joints is presented and an explanation for the behaviour of the different joint types is given. It is shown that for the box joint the warping deformation of the loaded member is the dominant factor in determining the magnitude and direction of the twisting of the second member, whilst this is determined for the stiffened mitre joint primarily by the St Venant rotation deformation of the loaded member. For the unstiffened joint it is shown that the warping and St Venant rotation deformation effects tend to cancel each other out.     

Variation in phosphoric acid concentration and treatment time and HEMA diffusion through dentin

IGF-1 and its receptors have been identified in many tissues including the central nervous system (CNS). We have previously demonstrated that injection of insulin directly into the cerebral ventricles (ICV) is followed by a drop in mean arterial pressure (MAP) associated with an increase in skeletal muscle blood flow. Given the similarities between the IGF-1 and insulin molecules and their respective receptors, we have investigated the effect of ICV administration of IGF-1 on systemic blood pressure and blood flow in selected vascular beds. ICV cannulas were implanted into normal rats and the animals were allowed to recover for 3 to 4 days. The femoral artery and vein were cannulated for blood pressure monitoring and blood sampling and blood flow probes placed around the iliac, the renal and the superior mesenteric artery were used to assess regional blood flow. ICV injection of IGF-1 resulted in a significant decrease in MAP with a nadir at 15 minutes and a gradual return to baseline by 60 minutes; heart rate increased 40 minutes after the injection. IGF-1 significantly enhanced vascular flow and conductance in the iliac, but not in the renal and superior mesenteric arteries. The effects of IGF-1 were much smaller than those observed previously with equimolar amounts of insulin. We conclude that IGF-1 can decrease MAP by selectively increasing blood flow to skeletal muscle through a direct action on the central nervous system.